ADBJLN_BR_03

Amount

FOUNDATION

Cleaning the Site as per Engineer Encharge

Making out Center line of Bridge approand various other component structure with necessary marking pillar lines, temporary bench mark including line out of bridge (Depending on Site condition)

Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out,. Construction of shoring &bracing , removal of stumps and other deletrious material and dispossal upto a lead of 50 meters , dressing of side Ordinary soil

Excavation in Ordinary Rock (Not requiring blasting)

Hard rock (blasting Prohibited)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Leveling course P.C.C grade M 15

Providing, steel anchor dowels (25 to 32 mm dia )

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 R.C.C grade M 30

Dewatering including diversion of stream providing cofferdam , bunds etc. as may be necessary for foundation and other parts of work and bailing out and pumping out water below the actual initial natural water level for start of that particular componant till competion of bridge etc. complet as directed by Engineer in charge. (Appron With Curtain Wall) Piers

Abutment

Returns

Filling annular space around footing in rock as per technical specification Clause 1203.4.3.

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 It No 13.2

SUBSTRUCTURE

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 R.C.C grade M 30

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 R.C.C grade M 30 For Abutment

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 It No 13.2

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm to be installed by the manufacturer / supplier to their authorized representative ensuring compliance to the manufacturers instruction for installation as per approved drawings and standard specifications etc. complete.

Providing and fixing neoprene bearing as per detailed drawings etc. complete.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 It No 12.9 PVC pipe 100 mm dia

Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 It No 12.1 Granular material

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 MORD specification 1300 It No. 14.5

Providing dry trap/granite/gneiss rubble stone soling 15cm to 30cm thick ….. Etc complete DSR I No. 17 P.No……… 900mm Flexible Mating

SUPERSTRUCTURE

Providing and laying in situ / ready mix M-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in main/ cross girders, diaphrams etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.

Providing and laying in situ M-20 cement concrete of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete well curbs including necessary shuttering, compacting by vibrating, finishing and curing etc. complete (excluding reinforcement) as directed by Engineer in charge. (7.60 bags/cum) Spec. No. :BR.12. Page No. 112. D.S.R.I.No.771 P.No.274

Drainage spouts complete as per drawing and technical specifications Clause 1209

Providing and laying cement concrete wearing course M 30 grade including reinforcement @ 75kg/Cumcomplete as per drawing and technical specifications Clauses 800 and 1206.3

Providing fitting and fixing mild steel railing complete as per drawing and technical specifications Clause 1208.2 It No 13.7

Providing and fixing stream lined reinforced cement concrete 1:2:4 guard stone including mild steel bar reinforcement etc. complete as directed by Engineer in charge.

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 It No 13.2

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Construction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510

Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704

Providing and Fixing Citizen information board of PMGSY Project

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 900 mm equilateral triangle

900 mm x 600 mm rectangular

600 mm x 450 mm rectangular

Road Delineators:Supplying and installation of delineators (Roadway Indicators,Hazard markers,Object markers) 80to100 cm high above ground level,painted black and white in 15 cm wide strips,fitted with 80x100 mm rectangular or 75 mm dia. Circular reflectorised panels at the top,buried or pressed in to the ground and confirming to I.R.C.79 and the drawings

Add Electric Ple Shifting

anirudh constructions