Renovation and Upgradation of Civil Veterinary Dispensary at village Chak Boor Wala, Block Jalalabad, Distt Fazilka (under Head 02-4403-00-101-14-99-53-Major Works)

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER, CONSTRUCTION DIVISION, PWD B&R BRANCH FEROZEPUR

Name of Work: Renovation and Upgradation of Civil Veterinary Dispensary at village Chak Boor Wala, Block Jalalabad, Distt Fazilka (under Head 02-4403-00-101-14-99-53-Major Works)

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Unit Rate Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Earth work in excavation in foundations , trenches etc. in all kinds of soil where pick jumper work is notinvolved and not exceeding 2.0 metres depth includingdressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation Cum Excess(+) Full Conversion INR

Cement Concrete 1:8:16 with Stone ballast 40mm gauge. Cum Excess(+) Full Conversion INR

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. Cum Excess(+) Full Conversion INR

Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation lead upto 30 metres Cum Excess(+) Full Conversion INR

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) Sqm Excess(+) Full Conversion INR

Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded. Sqm Excess(+) Full Conversion INR

Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, locknotch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete. Doors and windows frame of size 161mm x 60mm with 40 mm wide double rebate weighing 4.05 kg per meter. Rmt Excess(+) Full Conversion INR

Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.(Ch. 18.4) Qtl. Excess(+) Full Conversion INR

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Sqm Excess(+) Full Conversion INR

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Sqm Excess(+) Full Conversion INR

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth Cum Excess(+) Full Conversion INR

First class burnt brick work laid in cement sand mortar 1:6 in S/S. Cum Excess(+) Full Conversion INR

Cold twisted deformed (ribbed/ tor steel) Bars Fe 415 grade as per IS 1786-2008 for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete. Qtl. Excess(+) Full Conversion INR

12.5 mm thick cement plaster 1:5 Sqm Excess(+) Full Conversion INR

20mm Thick Cement Plaster 1:5 into Coat work Sqm Excess(+) Full Conversion INR

Terracing consiting of tiles 22.86 x 11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc. Sqm Excess(+) Full Conversion INR

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. Nos Excess(+) Full Conversion INR

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3 Nos Excess(+) Full Conversion INR

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. Rmt Excess(+) Full Conversion INR

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete Size 600x600 mm Sqm Excess(+) Full Conversion INR

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- iv) 35 mm thick (17.27-a-iv) Sqm Excess(+) Full Conversion INR

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. 35 mm thick. Sqm Excess(+) Full Conversion INR

Wire gauge Hollock wood door shutter without springs housed in chowkhat. 35mm thick Sqm Excess(+) Full Conversion INR

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) Sqm Excess(+) Full Conversion INR

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS: 4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item) Rmt Excess(+) Full Conversion INR

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. Nos Excess(+) Full Conversion INR

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. Sqm Excess(+) Full Conversion INR

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Sqm Excess(+) Full Conversion INR

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish Complete Sqm Excess(+) Full Conversion INR

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade. Sqm Excess(+) Full Conversion INR

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade. Sqm Excess(+) Full Conversion INR

Repair Existing Building Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish Complete Sqm Excess(+) Full Conversion INR

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed Sqm Excess(+) Full Conversion INR

Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm Sqm Excess(+) Full Conversion INR

Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material Sqm Excess(+) Full Conversion INR

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Design is homogenous throughout the tile body a Size 600x600 mm] Sqm Excess(+) Full Conversion INR

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. Sqm Excess(+) Full Conversion INR

Boundary Wall Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. Sqm Excess(+) Full Conversion INR

Cement concrete 1:4:8 (b) With stone aggregate 40mm gauge ii. mixing by mechanical means using concrete mixer volumetric type Sqm Excess(+) Full Conversion INR

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth Cum Excess(+) Full Conversion INR

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth Cum Excess(+) Full Conversion INR

12.5 mm thick cement plaster 1:4 Sqm Excess(+) Full Conversion INR

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in+B237 colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. Sqm Excess(+) Full Conversion INR

Providing and fixing 1st quality ceramic glazewall tiles Matt/ Semi Matt/ Glosy/ Highly Gloss finish/ Highlighter/ emboss conforming to IS 15622 (thickness to be specified by themanufacture of approved make in all colours,shades except burgundy, bottle green, black ofsize 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing withgrey cement slurry@ 3.3kg per sqm including pointing in whitecement mixed witpigment of matching shadecomplete(csr14.127) Sqm Excess(+) Full Conversion INR

Cutting holes upto 23cm square through B.B. in square through B.в. cement walls or stone masonary wall in cement for pipes, and making good the same &finishing according to existing finish where required. (b) Through wall 22.86 cm thick Nos Excess(+) Full Conversion INR

Sanitary Installation Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. Nos Excess(+) Full Conversion INR

Providing and fixing in position vitreous chinawarewhite lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brasspillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. i) Size 450mmx300mm Nos Excess(+) Full Conversion INR

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. (b) PVC tube connection of size 15mm x 450 mm with C.P. Brass nut Nos Excess(+) Full Conversion INR

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. (f) PVC tube connection of size15mmx 600 mm with C.P. Brass nut Nos Excess(+) Full Conversion INR

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. Nos Excess(+) Full Conversion INR

Providing & Fixing in postion 15mm i/dbib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. (i) C.P.brassBibcocklongnose/ longbody foam flow without flange Nos Excess(+) Full Conversion INR

Providing & Fixing in postion stop cock/Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. (b) C.P.brass 15mm Concealed stop cock with flange. Nos Excess(+) Full Conversion INR

Providing & Fixing in postion stop cock/Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. (c) C.P.brass 15mm Angle valve without flange Nos Excess(+) Full Conversion INR

Providing and fixing in position vitreous Chinaware white Indian make large flat back orangular lipped fronturinal 375x390x590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75mm, C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. Nos Excess(+) Full Conversion INR

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flopipes but without fittings and base support for tank. Liter Excess(+) Full Conversion INR

Providing and laying 60mm thick factory madecement concrete interlocking Paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to astrong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, allcomplete as per directions of Engineer-in-Charges Sqm Excess(+) Full Conversion INR

Wrought iron & Mild steel ladders, framed grills,gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doorsstair case iron railing etc. including cost of bolt sand nuts, screws, welding rod complete fixing in position. Qtl. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information