Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAdmitted-Finance | ₹2.6 L | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | JAIKISHAN V ACHARYA L1 |
|---|---|---|---|---|
| 1.00Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | ||||
| 1.01 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 550 | One Kilogram | 230 ₹1,26,500 Lowest |
| 2.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 90 | One Square metre | 1,290 ₹1,16,100 Lowest |
| 3.00Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | ||||
| 3.01 | Two or more coats on new work. | 19 | One Square metre | 195 ₹3,705 Lowest |
| 4.00Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. | ||||
| 4.01 | With cement mortar 1:4 (1cement: 4 coarse sand). | 16 | One Square metre | 735 ₹11,760 Lowest |
Tender Value
₹1.8 L
EMD Value
₹3,655
Closing Date
2 Jun 2026, 6:00 pmClosed
The Executive Engineer Civil Tender KTK Circle
Room No 324 3rd Floor CGMT Doorasamparka Bhavana No 1 Swamy Vivekananda Road Bengaluru 560008
Arresting leakage and other connected work of Engine Room at TE compound Shankarapura, Udupi dist.
2026_BSNL_278295_1
02/NIT/BSNL/CD/MYS/2026-27
Open Tender
Civil Works - Buildings
Item Rate
30 days
Shankarapuram
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
M/s BSNL MANGALORE TELECOM DISTRICT
₹3,655
10 Jun 2026
21 May 2026
4 Jun 2026
22 May 2026
2 Jun 2026
22 May 2026
22 May 2026 - 1 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | |||||
| 1.01 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 550 | One Kilogram | - | - |
| 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 90 | One Square metre | - | - |
| 3Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||||
| 3.01 | Two or more coats on new work. | 19 | One Square metre | - | - |
| 4Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. | |||||
| 4.01 | With cement mortar 1:4 (1cement: 4 coarse sand). | 16 | One Square metre | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.54 MB
BOQ_324936.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .