QUANTUM OF WORKS INVOLVED IN REPLACEMENT OF OLD AND JARJAR WIRE WITH PROVIDING ADDITIONAL POLE TO REDUCE SPAN LENGTH OF 11 KV AND L.T. LINE AND INCREASING CAPACITY OF DISTRIBUTION TRANSFORMER DUE TO OVELOADING AT DIFF. SITES UNDER

Amount

Safe Carriage of following materials from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

PCC Pole 8.5 mtr long

Other loose line materials with including conductor, Single and double Pole accessories, complete stay & earthing, insulator, x-arm, I/D & S/th Jointing Kits etc.

11 KV O/H Line by ACSR Weasel Conductor

Three Phase LT Line by ABC

Safe Carriage of following T/F from Elec. Store Center Unnao to diff. work dump site along with loading unloading and propoer stocking.

T/F 250 KVA 11/0.4 KV

T/F 100 KVA 11/0.4 KV

Construction of T/F Plinth of size 2x2x1.5 m on a padding 0.25 M deeo in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick, brick work in ration 1:4 cement & cores sand in the hollow portion the sand should be filled from the ground level up to 15 centimeter below from the top of wall, cement, sand & brick ballasts should be filled up to 15 centimeter. Two nos. of channel 100x50 in length 1500 mm will be grouded, 0.35 CM. RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4. The T/Fs plinth should be plastered on all sides 12 mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor)

Placement of 11/0.4 KV T/F from dump site to newly constructed T/Fs Plinth & installation and commissioning of 250 KVA & 400 KVA T/Fs of T/F Plinth and including jumpering with the system. (All the required materials as Al. Lugs Crimping Type for 250 KVA T/F & 400 KVA, Copper L-piece 62x225x12 mm etc for above job shall be provided by contractor except T/Fs and LT PVC Cable)

Construction of retaining wall, fabrication & erection of Wiremesh fencing around Transformer with retaining wall & 01 nos. gate with locking arrangement made of MS Angle Iron of size 50x50x6 mm jointed with nuts and bolts. Wiremesh of size 10 swg rectangle type, its painting as per norms of RESPO. (All the materials will be arrangement by the contractor)

Mounting of following Transformer on double pole including its cartage and dragging from dump site to pit site.

T/F 100 KVA

Dismantling of old & jarjar 11 K.V. line on existing pole including rolling back its conductor/G.I. wire from work site to dump site.

Dismantling of old & jarjar L.T. line on existing pole including rolling back its conductor/G.I. wire from work site to dump site.

Erection of PCC/ST Pole (11 KV Line) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Grouting of PCC/ST Pole as per RESPO Norms with grouting materials.

Earthing of pole as per RESPO Norms.

Digging of pits, fixing nuzzling and grouting of stay rods as per RESPO Norms with grouting materials.

Laying stringing and sagging of following type HT/LT Lines including all associated work with joint/jumpers and binding of insulator with complete all work as required.

11 KV O/H Line Three Phase

Three Phase L.T. Line by ABC

Safe Carriage of old and jarjar conductor/G.I. Wire from dump site to ESC Unnao with loading, unloading and proper stacking.

Safe Carriage of following T/F from work dump site to Electricity store center Unnao with loading, unloading and proper stocking.

T/F 100 KVA 11/0.4 KV

T/F 63 KVA 11/0.4 KV

M/S RATHORE ELECTRICALS

M/S NEW MAA KALYANI TRADERS