WELCOME MAINTENSNCE OF OFFICER MD ACCN UNDER GE GOMANTAK

Amount

Taking down cement plastering on brick or stone walls including raking out joints hacking for key scrubbing down with water etc inside shafts all as directed by Engr-in-Charge.

Material and labour for 10mm thick Ready Mix Plaster on brick or concrete surfaces finished even and fair with out using extra cement complete all as specified and directed

Material and labour for 5mm thick Ready Mix Plaster on brick work or concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed

Material and labour for one coat of alkali resistant primer on plastered surfaces over 1mm thick wall putty and applying two coat of oil bond distemper and preparation the surfaces complete all as specified and directed

Material and labour for 1mm thick putty on ceiling surfaces and applying two coat of oil bond distemper and preparation the surfaces complete including washing floors, cleaning glass, joinery, electrical fittings, wiring etc all as specified and directed

Material & Labour for preparation of old decorated plastered surfaces at walls including cornices, and applying one coat of white wash on wall facia cornices etc including washing floors, cleaning glass, joinery, electrical fittings, wiring etc completed all as specified and directed by Engr -in-charge.

All as per serial item No 06 above on ceilings.

Material and labour for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with and including integral waterproofing chemical PIDIPROOF LW mixed in proportion 200 millilitre per 50 Kg cement of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) as in padding on roof surface for correcting / making proper slope on roof, surface finished fair and even without using extra cement complete.

Chipping off existing loose, damaged concrete from RCC members of all affected RCC Columns, beams, slabs and chajjas on external and internal facades etc beyond main reinforcement.(if required in the opinion of the consultant), carefully with chisel and hammer including relieving structural members such as column, beam and slabs of their superimposed load partially or fully by provision of adjustable steel props, frames etc. Providing and applying rust passivator to existing reinforcement bars including wire brushing of reinforcement, cleaning, washing of concrete etc complete as directed. Providing and applying two coats of rust preventor slurry made out of cement in proportion 1:1.5 to excising reinforcement bars as directed complete. Providing and applying bonding coat of slurry and cement in proportion 1:1 to concrete and reinforcement substrates complete as directed. Providing and applying polymer modified cement mortar in required proportion (1:5:15) to RCC members including hand packing, curing and making the surface rough for plastering.

Dismantling of loose portion of concrete from ceiling and Supply and fix of wire mesh of weight 2.5kg/sqm and apply 25mm average thickness in CM(1:4) mixed with liquid integral WPC ( with guniting machine at a pressure not less than 5kg/sqm finally rendering 10mm thick plaster in CM (1:4) using WPC in the proportion recommended by the manufacturer complete all as specified and directed.

Material and labour for one coat of oil bound distemper including preparation of old plastered surfaces on ceiling surfaces, including washing floors, cleaning glass, joinery, electrical fittings, wiring etc complete all as specified and directed.

Material and labour for one coat of oil bound distemper on wall including preparation of old plastered surfaces , including washing floors, cleaning glass, joinery, electrical fittings, wiring etc complete all as specified and directed.

Complete removal of existence treatment of wall and applying a layer of 1mm thick wall care putty in two coat on wall and applying two coat of oil bond distemper including washing floor surface complete all as specified and directed

Complete removal of existence treatment of ceiling and applying a layer of 1mm thick putty in two coat on ceiling surfaces and applying two coat of oil bond distemper including washing floor surface complete all as specified and directed

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint including washing floors, cleaning glass, joinery, electrical fittings, wiring etc all as directed by Engr-in-Charge.

Material and labour for one coat of synthetic enamel paint on old painted steel surface of any description not otherwise described over 10cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour for one coats of exterior emulsion paint , white or tinted on old surfaces of walls including preparation of old surfaces and washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M& L for cleaning of surface with jet water to remove moss, fungus dirt etc opening of crack up to 5mm size and filling the same with PU sealant complete all as specified and as directed

Material and labour for applying one coat of primer under two coat of smartcare PU aqua and applying one coat of exterior emulsion paint to match the existing surface complete all as specified and directed

Material and labour for grouting the joints of roof tiles with mixing of cement, crack seal of approved make

Taking down wooden Chowkats or frames not exc. 1.5 sqm each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.

Supply and fix PVC Solid moulded Door Frame of Size 50X47mm & more made out of min 5.0mm Coloured with Plastic Trim decorated PVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacture’s Instructions complete all as specified and as directed.

Supply and fix Factory Made PVC Solid moulded Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Paneling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Draw-ings, complete all as specified and as directed.

Taking down wooden Chowkats or frames exc. 1.5 sqm and n.exc 4.0 sqm each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.

Taking down wooden shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified.

Supply and fix 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.

Supply and fix 2nd class H/W 35 mm thick Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Supplied and fitted 2nd class H/W 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Supply and fix aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).

Supply and fix butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)

Supply and fix 150 mm long Aluminium handles, cast type (ISI marked).

Supply and fix 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

Material and labour for PCC type C1 1:3:6 (using 20 mm graded aggregate) for filling the holes of the hold fasts.

S& F MS flat iron 25 x 3 mm as in hold fast for fixing if chowkats.

Material and labour for two coats of synthetic enamel paint on new wooden surface over a coat of pink primer including necessary preparation.

Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads up to 1.5 sqm complete all as specified.

Supply and fix Sheet glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.

Supply and fix figured glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.

Supply and fix in repair aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including removal of aluminium grills aluminium window shutters and refixing them in position after fixing of wire mesh.

Supply and fix Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples rate including all fixing arrangement of wire mesh.

Dismantling of false ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillet

Supply and fix for anodised aluminium snap grid frame work size of the false ceiling and size of angle 25mmx25mm and thick size of grid 605mmx605mm fixed with hangers 6mm dia, G.I (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

Supply and fix gypsum board of 12mm thick for false ceiling 60cmx60cm with staples on snap grid

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match . over and including 15 mm thick screening in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately). including dismantling of existing tiles

Material and labour for Glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed including dismantling of existing tiles

Material and labour for dark shade Verified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed including dismantling of existing tiles

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed

Supply and fix Machine cut cudappah stone slab 20-25mm thick over cement screed base 15 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding, rubbing and polishing complete

Supply and fix 18 mm thick celuka PVC sheet minimum 600 Kg/cum density grade-I quality of both side plain white colour regidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom inside the cabinet including drawer channels two No. in each drawer, magnetic ball catcher and all other fittings complete all as specified and directed Including taking down old board of any description Note:- (i) Quoted rates shall deem to include fixing of cabinet on wall with appropriate raw plug/dash through fastener type). (ii) Fabrication and installation of cabinet to be carried out by authorized vender of manufacturer only.

Supply and fix in repair Curtain rails, 25 mm dia fancy drapery curtain rod made of aluminium powder coated duly PVC sleeved with pair of fancy brackets and finial fixed in repair complete all as specified.

Supply and fix ( in repairs) Stainless steel sink with draining board , made out of 1.00 mm thick sheet (ISI Marked) for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 950mmx460mm with bowl size 410mmx 330mmx160mm complete all as specified and directed.

Supply and fix (in repairs) Vitreous china, white, Squatting pan ,'Orrisa' pattern size 580x440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete including making good to floor to match with the existing all as specified

Supply and fix in repair PVC seat cover colour or white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices, colour match with Existing EWC seat all as approved by GE

Supply and fix ( in repairs) Low level flushing cistern 10 ltr capacity moulded from virgin poly propylene Make Parry ware Brand Slimline Single flush including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed. approved by GE

Supply and fix in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including CI cantilever brackets, 32 mm dia brass Chromium plated waste fittings with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe

Supply and fix in repair Vitreous China wash down water closet pan (pedestal pattern), white ( flushing cistern and flush pipe) complete all as specified

Supply and fix in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe, high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. approved by GE

Supply and fix 15mm Chromium plated , fancy type, Stop valves / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair approved by GE

Supply and fix 15mm Bib taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE

Supply and fix 15mm pillar taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE

Supply and fix ( in repairs) Bidet spray ( Health faucet) with 1 metre extendable metal tube and holder completed all as specified and directed.

Supply and fix in repair brass chromium plated shower rose 125 mm dia with shower arms with swivel joints including fixing to steel pipe or union, complete all as specified and directed.

Supply and fix in repair Towel rail of brass chromium plated 600mm long with and including chromium plated brass screws wooden / plastic cleats approved by GE

Supply and fix in repair 200mm dia Towel ring of brass chromium plated and including chromium plated brass screws wooden / plastic cleats approved by GE

Supply and fix ( in repairs) CP Brass Toilet paper holder fixed to walls with chromium plated (CP) brass screws. complete all as specified

Material &Labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth.

Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, including all fittings complete all as specified. complete all as specified and directed including taking down existing pipe line

Supplying and laying of CPVC pipes 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, including all fittings complete all as specified. complete all as specified and directed including taking down existing pipe line

Supply and fix Stainless steel soap dish standard size heavy duty, complete all as specified and directed.

Supply and fix 300mm mild steel, in repair ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

Supply and fix in repair Steel rolling shutters with 1.00mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified & directed

Supply only Ball bearing for rolling shutters

Material and labour for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.

Supply and fix in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 Kgf / Sqcm for WHB and sink complete all as specified and directed.

Supply and fix grating doom type 100mm dia of stainless steel (min wt 25gms)

Supply and fix PVC door bottom weather strip door brush sweep seal fixed complete all as specified and directed.

Material and labour for in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm mm complete all as specified and directed.

Supply and fix in repair washroom cabinet mirror with 4 mm thick looking mirror of over all size 560 x 410mm fixed with and including chromium plated brass screws and wooden/plastic cleats.

Cleaning and removing all scale and dirt, etc, removing all dust and dirt from PVC/RCC tanks exc 250 Ltrs and n.exc 500 Ltrs from mouths of circulation pipes etc including letter writing for date of cleaning all as directed by Engr-in-Charge.

All as per item No. 82 here in before but exc 500 Ltrs n.exc 1000 Ltrs.

Treating as ATT in Post construction the soil under plinth protection,floor,almarah etc at the rate of 5 litres of emulsion per sqm of surface area including making hole and drill all as specified and directed by Engr-in Change

Treating as ATT the soil along with external perimeter of building at the rate 2.25 liters of emulsion per meter of the perimeter wall/crumple joint/Junction of wall of surface area including making hole and drill all as specified and directed by Engr-in Change

Taking down carefully copper/aluminium point wiring any type (light, fan socket or power) complete (fittings such as switches, ceiling roses pendants, regulators, sockets etc to be measured separately) removing materials at site and making good disturbed surfaces of walls floors etc.

Material and labour for one light point or fan point controlled by one switch with cables 1.5 Sqmm copper cable FRLS multistranded unsheathed drawn through & including casing and capping and 1.5 sqmm conductor cable for earth wire including making connection with common earth and earth dolly including all PVC casing accessories in wall/ceiling and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for Mylinc / Coral / Sleek model accessories etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light point controlled by one, one way switch 06 Amps.

All as per item No 85 above but bell point.

All as per item No 85 above but two way point.

All as per item No 85 above but 5 Amp independent board controlled by one switch.

All as per item No 85 above but 5 Amp same board controlled by one switch.

Material and labour for point wiring for 15 amp independent point with 4 Sqmm copper wire & 4 Sqmm copper wire as earth lead drawn through & including casing and capping of suitable size all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of switch piano flush type single pole, one way 5 Amp.

Supply and fix in replacement of bell push, flush type, 5 Amps.

Supply and fix in replacement of switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal.

Supply and fix in replacement of switch socket combination 2 in 1, 5 pin, 15 Amp flush type universal.

Supply and fix in replacement of modular switch 1 way 6A, 1 module, 230 volts all as specified.

Supply and fix in replacement of modular switch 2 way 6A, 1 module, 230 volts all as specified.

Supply and fix in replacement of modular switch 1 way 16A, 1 module, 230 volts all as specified.

Supply and fix in replacement of modular switch bell push 6A, 1 module, 230 volts all as specified.

Supply and fix in replacement of modular socket combination outlet 6A-2/3 pin, 2 module all as specified.

Supply and fix in replacement of modular socket combination outlet 6A/16A-2/3 pin, 2 module all as specified.

Supply and fix in replacement of ceiling rose, surface bakelite, 65x50 mm, two to three terminals complete.

Supply and fix in replacement of stepped type electronic fan regulator flush type on existing phenolic laminated sheet complete all as specified and directed.

Supply and fix in replacement of stepped type modular electronic fan regulator 2 module complete all as specified and directed.

Supply and fix modular metal flush box 3 module.

Supply and fix modular metal flush box 4 module.

Supply and fix modular metal flush box 6 module.

Supply and fix modular white cover plate with frame, 3 module

Supply and fix modular white cover plate with frame, 4 module

Supply and fix modular white cover plate with frame, 6 module

Supply and fix modular white cover plate with frame, 8 module

Supply and fix in repair fan capacitor 2.5 mfd 240 V AC supply.

Supply and fix exhaust fan 200/250 mm sweep plastic body, 230 volts including dismantling of old one as per specified and directed by Engr-in-Charge.

Supply and fix in replacement of bell Ding Dong AC, 230 volts, single pole.

Supply and fix in repair MCB 6 to 32 Amps, SP, braking capacity 10KA, C series all as specified and directed.

Supply and fix in repair MCB 40 to 60 Amps, SPN, braking capacity 10KA, C series all as specified and directed.

Supply and fix in replacement of TPN MCB 40 to 100 Amps, 'C' series, 10KA, 230 Volts all as directed by Engr-in-Charge.

Supply and fix in replacement of TP MCB 40 to 63 Amps, 'C' series, 10KA, 230 Volts all as directed by Engr-in-Charge.

Supply and fix in replacement of sheet metal enclosure DB, 4 way, SPN, double door factory made powder coated including bus bar and earth link connector, fixed in wall complete including part of job all as directed by Engr-in-Charge.

Supply and fix in replacement of sheet metal enclosure DB, 6 way, TPN, double door factory made powder coated including bus bar and earth link connector, fixed in wall complete including part of job all as directed by Engr-in-Charge.

Supply and fix MCB protected gang Box of 20 Amps with including plug top complete with one single pole 240V with 20 Amps MCB including disconnecting and removal of old one.

Supply and fix in replacement of integrated LED surface mounted round/square type fittings of 18 watts complete with PDC aluminium housing and milky diffuser complete all as specified and directed.

Supply and fix in replacement of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings etc complete all as directed by Engr-in-charge.

Supply and fix Submain wiring with three runs of 2.5 sqmm (Phase, neutral and earth) of single core multi stranded FRLS unsheathed PVC copper conductor cable 1100 Volts as per colour code drawn in casing capping including all accessories as required and connecting to Existing main switch board/DB & testing on completion including dismantling old unserviceable submain wiring complete.

Supply and fix Submain wiring with three runs of 4 sqmm (Phase, neutral and earth) of single core multi stranded FRLS unsheathed PVC copper conductor cable 1100 Volts as per colour code drawn in casing capping including all accessories as required and connecting to Existing main switch board/DB & testing on completion including dismantling old unserviceable submain wiring complete.

Supply and fix Submain wiring with five runs of 6 sqmm (Three phase, one neutral and one for earth) of single core multi stranded FRLS unsheathed PVC copper conductor cable 1100 Volts as per colour code drawn in casing capping including all accessories as required and connecting to Existing main switch board/DB & testing on completion including dismantling old unserviceable submain wiring complete.

Taking down carefully storage type water heater (Geyser) of 25/50 litres capacity after disconnecting inlet/outlet/vent pipes, electric/earth connections etc cleaning of the body inlet/outlet/vent pipes stop cocks non return valves etc leakage arresting of inner copper/steel tank by welding/brazing etc reassembling the geyser by replacing gaskets worn out nuts washers etc refixing the same in position by replacing mounting bolts and nuts reconnecting all inlet/outlet/vent pipes electric/earth connections and carrying out testing for proper functioning all as directed by Engineer-in-Charge. Note : Parts will be measured and paid separately.

Supply only heating element of 1.5 KW/2.0 KW capacity of storage type water heater by replacing inter connecting copper conductor cables and removal of old elements all as directed by Engineer-in-Charge.

Supply only thermostat suitable for 25/50 litre capacity storage type water heater including removal of old unserviceable ones as directed by Engineer-in-Charge.

Supply only stainless steel flexible pipe connection suitable size with stainless steel coupling nut and PVC washers on both ends complete for cold/hot water inlet/outlet lines for geyser.

Supply and fix plug top of 16 Amps capacity complete all as directed by Engr-in-Charge.

Supply and fix metal clad 3 pin plug top and socket of 20 Amps capacity any make including all electrical connections with suitable size cable/wire etc complete all as directed by Engr-in-Charge.

Material & Labour for Preparation of old painted surface of ceiling fan and iron body exhaust fan applying one coat of synthetic enamel paint with spraying paint on machine including making MES number on body of the fan including taking down, refixing, connecting and testing complete all as specified & directed by Engr-in- charge.

Supply and fix in replacement of LED tube light fitting surface and wall mounted batten with 20 watts LED having minimum 100 lumens/watts and with integrated electronic driver complete made up of polycarbonate complete all as specified and directed.

Supply and fix in replacement of LED tube light fitting surface and wall mounted batten with 10 watts LED having minimum 100 lumens/watts and with integrated electronic driver complete made up of polycarbonate complete all as specified and directed.

M/s VEEJEE ENTERPRISES (BID ID -3350795)

SHIVANI ENTERPRISES (BID ID -3351002)

M/S KAMALKANTH NAIK (BID ID -3356150)

M/S G.N.POWAR (BID ID -3356627)