Loading…
Loading…
Tender ID
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹65.3 LAWARDED | AWARDED |
Tender Value
₹62.2 L
EMD Value
₹1.5 L
Closing Date
20 Aug 2025, 10:00 pmClosed
Belagavi Urban Development Authority
Development of Garden at Maratha Colony in Rural Constituency, Belagavi
BGMUDA/2025-26/OW/WORK_INDENT75
BGMUDA/2025-26/OW/WORK_INDENT75
Open
Other Works
Two Tender Document System(Two Cover)
BGMUDA Commissioner Office Belagavi
₹1,560
₹1.5 L
19 Jul 2025
19 Jul 2025
21 Aug 2025
11 Aug 2025
13 Aug 2025
Development of Garden at Maratha Colony in Rural Constituency, Belagavi
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and ...
Item Description: Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation ...
Item Description: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Item Description: Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materia...
Item Description: Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates...
Item Description: Providing, laying, spreading andcompacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMCin mechanical mix plant carriage...
Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...
Item Description: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each d...
Item Description: Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Item Description: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Item Description: Foundation upto Plinth all other types (BGM PWD SR 2023/24 V I, Page No.111, Addendum -1 Sr. No. 1b)
Item Description: Formwork for Columns (BGM PWD SR 2023/24 V I, Page No.111, Addendum -1 Sr. No. 9)
Item Description: Formwork for Plinth Beams (BGM PWD SR 2023/24 V I, Page No.111, Addendum -1 Sr. No. 2)
Item Description: Formwork for Chejjas, Canopy & Other Architectural projections of minor sections (BGM PWD SR 2023/24 V I, Page No.112, Addendum -1 Sr. No.19)
Item Description: Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in allshapes and sizes in Cement mortar 1:4 (1 cement : ...
Item Description: Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including c...
Item Description: Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plas...
Item Description: Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 ...
Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete. ( as per PWD SR 2021-22 V I item no 1.11 P NO. 7 )
Item Description: Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural...
Item Description: Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engi...
Item Description: Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a pri...
Item Description: Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complet...
Item Description: Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. co...
Supplying and Fixing in position Stone benches with back support and arm rest including all lead and lift etc, complete and as per the direction of Engineer in charge of the work
Item Description: Providing and Fixing 'Citizen Information Board B" Providing and fixing of typical 'Citizen Information Board B" as per specifications and drawing. Two ACP Sheet of 4mm thick having...
Item Description: Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using ...
Supply and Installation of two seat Swing
Supply and Installation of multi seater see -saw
Supply and Installation of tower slide 2.1mtr including all lead and lift etc, complete and as per the direction of Engineer in charge of the work
Supply and Installation of four mery go round
Supply and Installation of DoubleTwister
Supply and Installation of Chest press
Supply and Installation of air walker double
Supply and Installation of Fabrotech double shoulder builder
Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets / Couplings / Tees / Bends / End-caps of same materials in exisiting trench as per IS 14930 part -...
Item Description: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as pe...
Item Description: Fabrication, Supplying, Erection, Testing and Commissioning of ...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 tim...
Item Description: Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injec...
Providing automatc street light control panel consist of 40Amps 4 pole MCB 1No, 40Amps 4 pole power contractor, 2 Nos of push buttons, 40Amps Power automatic Controller with SIM and necessary wiring i...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Providing and installing high grade stainless stell bin s/s swing type 12"x28" with pole all as per specification etc.complete and as per the direction of enginner incharge of the work ( market rate
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .