Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹25.8 L+₹59,040.50 (2.34%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹31.7 L+₹6.5 L (25.6%)Rejected-Finance 106 GREEN AVANUE NAGAR AJMER ROAD GAJSINGHPURA JAIPUR RAJASTHAN 302021 | JAIPUR | RAJASTHAN | 302021 | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹31.8 L+₹6.5 L (26.0%)Rejected-Finance 16 B DR AMBEDKAR ROAD SAROSH APARTMENTS PUNE 411001 | PUNE | MAHARASHTRA | 411001 | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹34.5 L+₹9.3 L (36.7%)Rejected-Finance | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹40.0 L
EMD Value
₹79,980
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI PRAVEEN KUMAR, IDSE
GE NDA Khadakwasla
COMPREHENSIVE REPAIR TO CERTAIN BLDGS OF MES COLONY INSTALLATION AND MD OFFRS ACCN D2 E3 AREA UNDER ZONE A AREA AT NDA KHADAKWASLA
2022_MES_567481_1
8665/E8
Open Tender
Civil Works
Works
180 days
GE NDA Khadakwasla
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
Yes
GE Khadakwasla
₹79,980
Yes
14 Jan 2023
6 Dec 2022
4 Jan 2023
6 Dec 2022
2 Jan 2023
20 Dec 2022
6 Dec 2022 - 19 Dec 2022
Amount
Dismantling of Asbestos cement corrugated, semi-corrugated sheet in roof covering complete all as specified and directed
Dismantling plain or corrugated steel sheeting, any guage, thickness, incl Nanital or similar pattern roof covering complete all as specified and directed
S&F pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed (Note rate included to work upto 20 mtr height)
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed . (Note rate included to work upto 20 mtr height)
S & F Steel Tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Note rate incl to work upto 20 mtr height) complete all as specified and directed
S & F rolled mild steel in joist, channel, angle, or tee section fixed independently, without connecting plates etc Confirming to FE 410, quality A (Note rate incl to work upto 20 mtr height) complete all as specified and directed
S&F plates (plain or chequered) channels, square cut or notched (ordninary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs ( framed) including stringers, treades landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and as direceted. FE 410 W (Gde-E250) Quality B
Dismantling of floor hearth, wall tiling incl cement mortar bedding (but not backing) removing of serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for 35mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed
M&L for PCC (1:4:8) type D-1 (using 20mm size graded stone aggregates) as in sub base 50mm thick complete all as specified and directed
S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm/20 x 20 x 25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM (1:6) in floors complete all as specified and directed
M&L for 60 mm thick glossy finished cement concrete coloured interlocking pavers, pattern as approved, as in floors or pavements, laid on 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all manufacturer's instruction complete all as specified and directed
M&L for vitrified coloured ceramic tiles flooring 8 to10mm thick (square/rectangular) polished laying in design pattern (Pattern approved by GE) area of each tiles not ecx 0.38 Sqm in floor etc laid bedded over 20mm thick CM (1:6) bedding & pointed in white/coloured cement to match coloured tiles etc complete all as specified and directed
M & L for 25mm to 30mm thick rough dressed sahabad stone slab flooring bedded and jointed in cement mortar (1:6) and pointed in CM (1:3) incl 15mm thick screed bed CM (1:6) complete all as specified and directed.
M & L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed
Demolition of concrete / Brickwork or stone/block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
M&L precast cement concrete block masonry exc. 10 cm width with solid block 1:3:6 type CI using 20 mm size graded agg. Grade and setting in cement mortar (1:6) complete all as specified and directed
M&L for providing rendering 15mm thick on other than fair faces & brick or concrete surfaces in CM (1:4) finishing even and smooth without using exta cement complete all as specified and directed
M&L for preparation of newly plastered/ concrete wall surface and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed
M & L for 4mm thick Asbestos cement plain sheet 600 x 600 for ceiling on anodized aluminium grid work 605 x 605 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x 25 x 1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm on RCC slopping, including two coats of White wash and preparation of surfaces complete all as specified and directed
Supply & Fixing in repairs in parts or as a whole Non Asbestos 4 mm thick fix in ceiling for insulation and acoustic purposes, 60 X 60 Cm in size, fixed with nails to timbet frame work or with staples on snap grid each sheet fix in different locations complete all as specified and directed
M & L for for false ceiling 5mm thick PVC panels (coloured / designe) including moulding of pattern as approved by GE on GI grid frame workconsisting grid & GI main tee 32 x 24mm, cross tee 25 x 24 mm and angle of walls of sizeof grid not less than 600 x 600mm hung from ceiling using 3mm GI wire suspendors spacers at 120cm c/c on main runners includingmaking nitches for light, fan decorative / concealed light fittings and fasteners if required complete all as specified and directed
M & L for preparation of suraface two coats of distemper oil emulsion on ceiling complete all as specified and directed
S & F 2nd class soft wood Weather boarding, clean sawn, thickness 20mm to 25mm and rebated on thick edge to give 20mm laps and fixed complete all as specified and directed
M & L for preparation of old surfaces and one coats of distemper oil emulsion on wall complete all as directed.
Servicing and repairs to existing rolling shutters at all heights above floor level of sizes mentioned below comprising of removing the exsisting hood cover, rectifying damages, removing all shafts along with bearings, springs, gears etc. reconditioning/ adjusting the tension of springs, rectifying damages, if any, to laths, grills flats, bottom plates guide channels, locking arrangements, handles including providing end clips and pins, welding where required reassambling the shutter, refixing the same in original position. Luberating all moving parts ,the new spare part shall be measure and paid separately below, operating and commissioning the shutters to the entire satisfaction of the Engr-in-Charge. (Rate includes taking down and refixing of rolling shutter in same or other opening) Rolling shutter for opening of size exc 6 sqm and n exc 12 Sqm complete all as specified and directed
All as per item No 27 but Rolling shutter for opening of size exc 12 sqm and n exc 24 Sqm
Supply only the following approved quality spare parts to the rolling shutters/collapsible gates at all heights above ground level. High Tensile spring coils upto 600mm long 100mm dia
All as per item No 29 but High tensile spring coil upto 450mm long 100mm dia
All as per item No 29 but Ball bearing for rolling shutters
All as per item No 29 but MS bottom plates 150mm wide x 3.2mm thick with handles and locking arrangements.
All as per item No 29 but MS guides 3mm thick with hold fast /lugs embaded in masonry walls
All as per item No 29 but 1.25mm thick 75mm wide MS laths securing with clips
All as per item No 29 but Supply only wheel with bearing for collapsible shutter
All as per item No 29 but Supply only end clips
All as per item No 29 but Safety lever locks mild steel with 4 levers for rolling shutters
Supply only Plain, black, mild steel sheeting, 1mm thick for upper and lower box of rolling shutter complete all as specified and directed
M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed
M&L for one coat of synthetic enamel paint including preparation of old steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed
M & L for taking down /dismantling and erection of steel gate after repair of opening n.exc 5 mtr any weight incl welding of any parts new/old, welding of pintal hinges, providing newpintal hinges where ever reqd, fixing of pintal hinges with column/wall. Please note other items required for repair to be paid under respective supply item complete all as specified and directed
Supply of mild steel in flat, round or square bars in available length confirming to FE 410 Quality A complete all as specified and directed
Dismantling structural steel work incl doors, gates but excluding framed truss etc complete all as specified and directed
S & F 20 - 25 mm fancy type stainless steel curtain rod (as approved by Engr-in-Charge) good quality as per size required at site complete all as specified and directed.
Fancy type brackets (as approved by Engr-in-Charge) fixed to wall/ chowkhat as per site complete all as specified and directed.
Fancy type knobs(as approved by Engr-in-Charge) for curtain rod ends fixed to wall/ chowkhat as per site requirement complete all as specified and directed.
S & F for aluminum powder coated (poder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm Section No 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed.
S & F for Mild Steel Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S & F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S & F in repair Anodised aluminium door/ window/Ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.
AVS CONSTRUCTION
Raj Construction Company
M/S CHANDAN BUILDERS
M/S Narendra Construction
Sarkar Enterprises
Sunil Constructions
Mehta and Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .