Renovation of 100 Bedded Girls Hostel Biru in Simdega.

Amount

Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.

Taking down chowkhat in doors including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceilling with clean sand of F.M. 1.5 including screening , curing with all leads & lifts of water scaffolding taxes and royality all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of oil bound distemper of approved shade and make over old surface including washing, cleaning and papering the walls, scaffolding, washing of floors and taxes, all complete as per building specification and direction of E/l.

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Labour for scrapping old paint with paint remover and blow lamp as required on wooden or steel surface including cost of all labour and materials and scaffolding all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.

Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all comple as per building specification and direction of E/I.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

ProviCing 19rnm thick water proof cement plaster (1:3)with clean coarse sand of F M 1.5 with lntegral water proofrng compound Liquid @'125 mloe,'bag cenrent inclucttng screening, curing with all leads and lifts of water, scaffolding iaxes and royalty all complete as per building specification and direction of E/|. Brand-Stl<a-Plastocrate plus, MYt(proof WP 10, Fosroc-Conplast X4211C, Dr.fixit Pidiproof LW+ of,':ciurir.,alent

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:2:4(1Cement :2 coarse sand (zone-III):graded stone aggregate 20 mm nominal size).

Providing and laying rectifified Glazed Ceramic floor tiles of size 300 X 300 mm (thickness to be specified by the manufacture)of 1st quality conforming to IS:15622 of approved make in all colours & shades except White,lvory, Grey, Fume Red Brown,laid on 20mm thick bed of cement mortar 1:4 including grouting the joints with white cement and matching pigments etc.complete. Size 300mm x 300mm..

Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt, rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royality all complete as per building specification and direction of E/I.

Water proofrng for Old and New Roof Slab :- Providing and laying water prooflng treatment on roof slab by applying two Component, factory a designed ready to use, acrylic modified flexible,\fbrush, roller or spray eppled wate r proof i n g coati n g as per man ufactl rer specificatio r-(With following steps :- (a)surface preparation :-Provrding and cleaning of concrete surface to remove dLrst, oil, grease including removal of existing loose paint /coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from sofftt to identify seepage, leakage. On identiiication of seepage, cement grouting to be done with non shrink expanding admixture of Sika lndia Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc or equrivallent. Providing and reparing of all corners and joinis such as those betr,veen the parapet wall and the roof slab etc shall

Covering of treated surface wrth PCC :- Providing 25 mm thick Cement Concrete M20(1:'1.5:3) r'naintaining slope in alternate 2 mIx 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and clcaned sand of F M 2 5 io 3 including screening,shuttering,and mixing cerite nt c0ncrete in mixer with admixture of integral water proofing and placing rn position,strikirrg cLrring,t-a]glgnd royality all complete as per buildirrg specifictionJand direction of E/l.Panels that has been left should be casteci nextday.-lhere should be 6 mm gap between Panels.Brand- Sika *Plastocrate plus,MYK proof WP10, Fosroc- Conplast X421ic , Dr Frx,t Prdiproof LWr

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :3 trak

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .

With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm)

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.

Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge.

Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

S / F / F viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S approved make with 100mm. H.C.I. 'p' trap 15 liters C.I. pull & let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm. alkathene / PVC telescupice flush, pipe about 2.00 m. long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthen ware foot rest to be fixed in floor 15 mm. C.I. body brass spindle stop cock of weight not less than 50 grams, 15mm. PVC connecting pipe 450 mm. long and the exposed pipe and cistern eith two coats of approved paints over a coat of red oxide primer etc. all complete as per specification and direction of E / I. 580 mm. long with 12.5 liter low level PVC cistern

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

(b)12.5 lit. low level P.V.C. cistern

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms(rate =673.40/1.2254)

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.,,Rate=111.45/1.2254

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore,Rate=506.80/1.2254

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

150 mm diameter,,Rate=222.35/1.2254

Supplying and installtion Polythine water storage tank do...do all complete as per direction of E / I.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour( Rate 113.35/1.2254)

Flush pipe with union spreaders and clamps all in C.P. brass for single stall (including C.P and Fitting)Factor 1.145

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS :13592 type A including jointing with seal ring conforming to IS : 4382, leaving 10mm gap for thermal expension, (i) single socketed pipes

75 mm. Dia. PVC pipe,Rate=248.80/1.2254

110 mm. Dia. PVC pipe,Rate=377.40/1.2254

Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expension.

Single push fit coupler 100 mm. dia. ,,Rate=127.60/1.2254

Bend 110 mm. dia...,,Rate=150.35/1.2254

Shoe 110 mm dia,.,,Rate=131.85/1.2254

Providing and fixing to the intel mouth of rain water pipe cast iron greetings 15 cm diameter and weighing 440 grams.

Providing and fixing unplasticised PVC pipe cleaps of approved design to unplasticised PVC rain water …. … E/I

110 mm. Dia. PVC pipe

Providing and fixing Chlorinated polyvinyl Chloride(CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer in Carge.

15 mm nominal outer dia pipes,,Rate=244.70/1.2254

20 mm nominal outer dia Pipes,Rate=274.30/1.2254

32 mm nominal outer dia Pipes,Rate=438.60/1.2254

Making holes in walls for laying G.l. pipes and restoring the same after pipe lavinq as per specification and direction of E/|.

(d) 250mm thick wall

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit with modular type, Group A

Wiring for light/power plug with 2x4sq.mm FR PVC insulated copper conductor single core cable

S/F metal box of 180x100x60m deep on surface/recessed with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 and 15/16 Amp socket outlet and 15/16 Amp piano type switch connection etc as reqd.

Wiring for circuit/submain wiring alongwith earth wire -do-

2x1.5 sq.mm + 1x1.5 sq.mm earth wire

2x2.5 sq.mm + 1x2.5 sq.mm earth wire

2x4 sq.mm + 1x4 sq.mm earth wire

Supplying and fixing following modular type switch/ socket on the existing switch box/cover

5/6 amps, one way switch

15/16 amps, 6 pin socket outlet

S/F batten holder

Supplying and fixing batten holder including connection etc. as required.

S/F ceiling rose

Supplying and fixing 2 pin, 5 amps ceiling rose on existing junction box/ wooden block including connection etc. as required.

S/F rewireable double pole/TP&N switch disconnector - Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as required.

16 amps, double pole

100 amps, TP&N

S/F S.P. MCB DB

S/F following way single pole neutral, sheet, MCB distribution board, 240 volts on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)

8 way, single door

S/F 15/16 watt LED Bulb

Supply of 48" (1200 mm) Ceiling Fan Bajaj/Crompton or any other approved make etc without regulator

Supply of 9" (230mm) metal exaust fan Fan Bajaj/Crompton or any other approved make etc

30W LED Flood light

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50H2, single phase supply etc. complete as required.

10/12W LED Tube light

Carriage of materials by diesel truck including loading at source, unloading at works site and stacking properly, labour, P.O.L. etc. all complete as per direction of E/I.

(i) Brick with avg.lead 8 KM (1k+7p)

(ii) Sand with avg.lead 10 KM

(iii)Stone chips with avg.lead 22 KM

Earth work with avg lead 3KM

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth to a distance up to 50m. Including all lifts with levelling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design & building specification and direction of E / I

Extra for earth work in hard soil as per specification and direction of E/I (vide classification of soil item - B) Quantity same as per above item no. 1

Earth fillng in foundation trenches and plinth in layers not exceeding 150mm. thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches wtith a lead of 50M. And lift of 1.5M. All complete as per building specification and direction of E/I (Mode of measurement - compected volume) Quantity same as per item no. 1 i.e.

Providing coarse clean sand filling in foundation trenches and plinth including ramming and watering in layers not exceeding 150mm thick with all leads & lifts including the cost of all materials, labour, royality, & taxes all complete as per building specification and direction of E/I (Mode of measurement - compected volume).

Providing designation 75B one brick flat soling joints filled with local sand including the cost of watering taxes royality all complete as per building specification and direction of E/I.

Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Reinforced cement concrete work in walls (any thickness) includ beams,suspended floors ,roofs having slope upto 15" landing, balcony,shelves,chajjas,lintel,band, plan window,sills staircase and sprial staircase above plinth level upto floor five level excluding cost of ,shuttering finishing and reinforcement with 1:1.5:3 (1 cement :1.5 corse sand (zone-III):3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for

Lintel

Roof Slab

Providing TMT steel reinforcement 8mm dia. rod 12mm dia as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position all complete as per building specification and direction of E/I.

Total Weight (8 mm)Dia steel in M.T

Total Weight (10mm)Dia steel in M.T

Total Weight (12mm)Dia steel in M.T

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering ,shuttering , finishing and reinforcement -All work up to plinth level.

1:1.5:3(1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

providing designation '100 A brick work with fly ash lime brick (FLAG) confirming to lS 12894-199C (9"x4.5'x3") in C M (1 :6)in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 inciudinq providing 10 min thick mo(ar joints, cost of screening materials,rakinq out loirrts to 15mm depth, curing, taxes and royalty allcomplete.as per building specification and direction of E/|.

Reinforced cement concrete work in walls (any thickness) including attached pillasters,buttresses,plinth and string courses fillets ,columns pillars,piers abutments ,post and struts etc.above plinth level ,excluding cost of ,shuttering finishing and reinforcement with 1:1.5:3 (1 cement :1.5 corse sand (zone-III):3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting,proppingetc.and removal of form for foundation,footing ,bases of colunmns ,etc for mass concrete.

siffners Upto PL, Colums Upto PL

Providing 12mm. thick water proof cement plaster (1 :3) with clean coarse sand of F,M 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Providing 150mm. wide brick drain in cement mortar (1:6) with av. 125 mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Making hole in wall for G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.

125mm thick wall

Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l

(d) 32 mm dia.wt not less than 700 gms

Supplying, fitting and fixing vitreous white glazed earthen ware indian squating type 600x350mm urinal plate of parry, Hindustan or any other l.S.S. approved make with internal flushing rim, 100mm white glazed earthen ware channelabout 1m. long 5litre capacity C.l. automatic flushing cistern of reliance or any other approved make with fittings R.S. or C.l. brackets 1Smm and 45 cm long PVC / Alkathene pipe standard G.l: flush pipe for backand front with spreader fittings and brass coupling etc. 15 mm C.l. Body'brass spindle stop cock weight not less than 450 grams. all complete including painting of exposed parts with 2 coats of approved paint over a coat of red oxide primer and cutting the wall and floor and making good the same as oer soecification and direction of E/|.

(b) 450 mm x 350 mm size (small)

Supplying of XLPE alluminium armoured cable with all complete job. 16sqmm, 4 core

Earthing with copper earth plate 600mm x 600mm x 3mm thick Including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (but without charcoal or coke and salt)

Salt/ charcoal for plate earth electrode -

Extra for using salt and charcoal for GI or copper plate earth electrode as required.

Supplying,at site angle iorn post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and driling holes upto 10 mm etc.complete.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

LALINDRA SINGH