Restoration of Water Supply in different areas falling under the Jurisdiction of City W.W Sub Division Srinagar.

Amount

(Part-A) Distribution System

Earthwork in excavation by manual means in trenches of foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth up to 1.5 mtr including disposal of excavated earth up to 1 mtr from cutting edge, disposed earth is to be leveled and neatly dressed in: All kinds of soil.

Excavation in water bound macadam road including stacking of serviceable and unserviceable material separately and disposal of unserviceable lead upto 50 m and lift upto 1.5 m, disposed material to be neatly dressed.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. Layer not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Open timbering in trenches including Strutting and shoring complete (Measurements to be taken of the face area timbered) Depth exceeding 3mtr but not exceeding 4.5 mtr.

Clearing jungle including of rank vegetation, grass, brushwood, trees & saplings of girth upto 30cm measured at height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared.

Demolishing of cement concrete manually/ by mechanical means including disposal of material within 50 mts lead. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) crushed.

Demolishing R.C.C work manually/ by mechanical means including stacking of steel bars & disposal of unserviceable material within 50 mts lead.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material & disposal of unserviceable material within 50 mts lead. (In cement mortar).

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material & disposal of unserviceable material within 50meters lead:

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50meters lead.

Dismantling of C.I pipes including excavation and refilling trenches after taking out the pipes manually/by mechanical means breaking lead caulked joints, melting of lead and making of blocks including stacking of pipes and lead at site within 50 meter lead. As per direction of Engineer incharge.

Up to 150mm dia

Above 150mm dia

Above 300mm dia

Dismantling of C.I Sluice Vavle including stacking of useful materials with a lead of 50 meter.

Up to 150mm dia

Above 150mm dia

Cutting of pipes(all types) using electric cutter including cost of electric supply DG set and other arrangements.

20 to 80mm G.I pipe

80mm dia C.I pipe

100mm dia C.I pipe

125mm dia C.I pipe

150mm dia C.I pipe

200mm dia C.I pipe

250mm dia C.I pipe

300mm dia C.I pipe

350mm dia C.I pipe

400mm dia C.I pipe

450mm dia C.I pipe

500mm dia C.I pipe

600mm dia C.I pipe

700mm dia C.I pipe

Providing, fabricating, placing and fixing of M.S fittings, viz bends, Tees, reducer, angles, collars, plats etc. made out of 6mm/8mm thick M.S plate as per site conditions including welding, cutting. The job is to be paid in fitted and finishing form including cost of all accessories and T&P.

Providing/ fixing of M.S flanges made out of 10mm thick M.S plate including cost of welding charges, nut, bolts and washers etc. (complete job).

80mm dia

100mm dia

150mm dia

200mm dia

250mm dia

300mm dia

400mm dia

450 mm dia

Providing lead caulking joints to spun iron or C.I pipes and specials including testing of joints but excluding the cost of pig lead.

100 mm dia pipe

125 mm dia pipe

150mm dia pipe

200 mm dia pipe

250 mm dia pipe

300 mm dia pipe

350 mm dia pipe

400 mm dia pipe

450 mm dia pipe

500 mm dia pipe

600 mm dia pipe

Supply of pig lead to site

Supply spun yarn to site

Laying and fitting of following dia G.I. pipe complete excluding cost of pipes and earth work.

20mm dia pipe

25mm dia pipe

40mm dia pipe

50mm dia pipe

65mm dia pipe

80mm dia pipe

100mm dia pipe

Making connections of G.I distribution branch with G.I of following size by providing and fixing Tee, including cutting and threading the pipe Complete.

25-40 mm dia nominal bore.

50-80 mm dia nominal bore.

Fixing Water Meter and stop cock in G.I pipe line including cutting and threading the pipe and making long screws etc. complete.(cost of water meter and stop cock to be paid separately)

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) 80mm -100mm dia D.I pipe

Providing push on joints to centrifugally (spun) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket

100mm dia

150mm dia

200mm dia

250mm dia

300mm dia

350mm dia

400mm dia

450mm dia

500mm dia

600mm dia

650mm dia

700mm dia

800mm dia

900mm dia

1000mm dia

Providing, laying and filling of materials in trenches, road cut or wherever required including consolidation, by ramming or other means etc complete job.

Nallah Muck

Stone Dust

WBM grade IInd 13mm to 45mm

Providing/laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level. 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate, 20mm nominal size) crushed.

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Welding of MS pipe fitting by way of engaging Generator, welding set including all sorts of carriages involved.

(Part-B)Water Treatment Plants

Restoration/repairs of various dia of Sluice valves by way of replacement of worn out parts viz Sluice Rod/Check nuts/Disk including fabrication, finishing of required size, dia. The payments shall be made by weight to the finished item. (Sluice Rod (Stainless Steel) 700mm dia/600mm dia/500mm dia/450mm dia/400mm dia/350mm dia/300mm dia/250mm dia/200mm dia/150mm dia

Check nuts (Gunmetal) 700mm dia/600mm dia/500mm dia/450mm dia/400mm dia/350mm dia/300mm dia/250mm dia/200mm dia/150mm dia

Disk/Gate 700mm dia/600mm dia/500mm dia/450mm dia/400mm dia/350mm dia/300mm dia/250mm dia/200mm dia/150mm dia

Repairs/restoration to the damaged 3-Phase of various capacities of horizontal pumping units by way of disconnecting the power supply connections of Motor then dismantling of Motor from the base frame. The job includes dismantling of Motor assembly and then extracting the damaged/burnt stator coils from the stator coils from the stator slots using proper tools and tackles avoiding damage to the stator core. The job includes inserting proper insulation in all slots and then complete rewinding of 3-Phase Motors in copper wire insulated having specific size and gauge of superior quality and same within the existing power meters. The job shall further include registration of Motors on the frame and then re-coupling of pump Motor and then completing the electric connections. The job includes testing on full load conditions at site. The job also includes cost on account of skilled man power, involved, tools, tackles, besides all sorts of carriage involved complete. The unserviceable material obtained may be returned to Divisional Store under proper R/I.

Replacement of damaged LED Bulbs of different kinds.

Fixing of various dias of Sluice Valves to be supplied by Department including cost of nuts and bolts, rubber insertions etc. The item includes all sorts of carriages involved.

700mm dia

600mm dia

500mm dia

450mm dia

400mm dia

350mm dia

300mm dia

250mm dia

200mm dia

150mm dia

100mm dia

Construction of Bund at Head works or across Nallah by way of providing/laying of earth/sand filled bags including cost of earth/sand, sewing, handling charges and all sorts of carriages involved.

De-silting of intake channels by way of clearance of silt by washout/manual labour including charges of all tools and tackles complete.