Construction of Transit/Working Hostel for District Level Officer at Tamenglong, Tamei and Tousem under Hill Area Development Programme.

Amount

(A) TAMENGLONG LAND DEVELOPMENT

Earth work in hill cutting i/c disposal of excavated earth leath upto 1.5 metres disposed earth to be leveled and neatly dressed

EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressingcomplete with a lead of 15 km

CEMENT CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (a) C.C. 1:4:8 (1 cement :4 Kanhaighat coarse sand :8 graded stone aggrt. 40mm nominal size).

Polygonal rubble masonry ( uncoursed / brought to courses ) squared rubble masonry (uncoursed /brought to courses ) with hard stone of approved quality in foundation & plinth in cement mortar 1: 6 (1 cement:6 coarse sand) i/c levelling up with cement concrete 1:6:12 (1 cement:6 coarse sand:12 stone aggregate 20 mm nominal size) at plinth level.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement1: 1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level.

Steel Reinforcement for R.C.C. work including bending, binding and placing in position complete. (b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(d) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(e) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(b) Flat surfaces such as suspended floor, roofs landings and the like floors etc. upto 200mm in thickness.

BRICK WORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand) For Septic Tank

Half brick masonry 2nd class (local first class) in cement mortar 1:3 (1 cement : 3 kanhaighat coarse sand) in superstructure.

25mm cc flooring 1:2:4 (1cem:2 c/sand :4 st. aggrt.20mm & down gauge ) finished with a floating coat of neat cement.

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position a) Local best quality Uningthou

P/F 40 mm thick panelled, glazed or panelled & glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (ordinary type) with necessary screws .a) Local best quality Uningthou

Providing and fixing bright finished brass hand drawn hooks & eyes. ( a) 150mm

Providing & fixing Brass Sliding door bolts bright finished or black enamelled with nuts & screws etc. complete (a) 250x16 mm

Providing & Fixing Brass Tower bolts with screws & nuts complete, (a) 250x10 mm

Supplying door & window clamps with 40mm x 6 mm FB 80 Cm long i/c bends

Providing & fixing Brass Handles with screws & nuts complete,(a) 125mm

STEEL WORKS

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrom primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete.(a) Electric resistant welded tube (Conforming to IS : 1611 - 1979).

ROOFING, CEILING &GABLE

Trazoidal pre painted profile sheet roofing of approved brand DYNA Roof or equivalent with seltdrilling screws of 68 mm long Xylon coated screws with PVC washer & Cap complete , excluding thecost of purlin & trusses 1) Prepainted Galvalume sheet (PPGL) i) Profile sheet 0.50 mm / 4.2 kgs / sqm

Trapizoidal pre -painted profile sheet for ridges gutter or valley 610 mm wide of approved brand DYNA roofor equivalent fixed with seld drilling screws of 68 mm long xylon coated screws with PVC washer & capscompleted excluding the cost of purlins rafter & trussesi) Pre painted Galvalume sheet (PPGL) i) profile sheet 0.50 mm /4.2 kgs /sqm

Providing wood work in frame of false ceiling, partition etc sawn and put up in (b) Uchan/Tairen Wood

3mm thick assamited hard board sheet ceiling with beading 62x12mm of uchan wood complete (frame work to be paid separately)

Providing & fixing M.S. grills of required pattern to wooden frames of window etc. with M.S. flats at required springs & frames all round bars with round headed bolts & nuts or by screws (a) ornamental grill.

Providing & fixing in position collapsible steel shutters with vertical channels 20 mm X 10 mm X 2 mm & braced with flat iron diagonals 20 mm X 5 mm sizes with top & bottom rails of T iron 40 mm X 40 mm X 6 mm with 38 mm dia steel pullets complete with bolts & nuts, looking arrangement, stoppers, handles i/c applying a priming coat of red lead paint.

FLOORING WORKS

50 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

FINISHING

12mm cement plaster 1:3 (1 cement : 3 Kanhaighat coarse sand).

15mm cement plaster 1:3 (1 cement : 3 Kanhaighat coarse sand).

Neat cemet punning

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting two or more coats (excluding priminof appd. quality in all shades on new work to give an even shade.g coat) with superior ready mixed paint for wood work

Applying ready mixed priming coat (garware red lead of approved quality) on steel work.

Painting (two or more coats excluding priming coat) with synthetic enamel paint of approved quality all shades except black or chocolate on steel on new work to give an even shadee.

Distepering with dry distemper of approved quality on new work i/c priming coat of whiting to give an even shade

P/F 75mm to 60mm rounded hand rails in straight lengths complete in uningthou wood.

P/F 75mm to 60mm Uningthou wood scrols to suit to rounded hand rails (dia of scrols tvo be three times the width of hand rails 75mmx60mm).

P/F rounded nosings 75mm wide & 30mm to 40mm thick, fixed to edges of landings to match stairtreads rebated to suit thickness of flooring as required tongued & grooved i/c returned edgescomplete in Uningthou wood.5mm to 60mm Uningthou wood scrols to suit to rounded hand rails (dia ofscrols tvo be three times the width of hand rails 75mmx60mm)

P/F20 mm thick plank as eave board with (a) Tolhao/Uchan wood

MISCELLANEOUS

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 kanhaighat coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground

WATER SUPPLY & SANITARY INSTALLATION

PIPE FITTING

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc.( External )

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc.(Internal work) (a) 15mm Diameter.

Providing and fixing 610 X 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws .

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle level) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) white vetreous china orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests.

Providing and Fixing wash basin with C.I. brackets, 15mm dia cp Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White vitreous china Wash basin size 550X400mm with a 15mm cp Brass single hole basin mixer.

Providing and fixing 100 mm HCI soil ,waste & vent pipes

Providing and fixing 50 mm HCI soil ,waste & vent pipes

Providing and fixing brass stop cock of approved quality.(a) 15mm diameter.

Providing and fixing C.P. bib cock of approved quality. (a) 15 mm diameter.

P/F Brass full way G.M valve with C.I wheel of approved quality (a) 25mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.(i)1000 litres net capacity storage tanks

(B) TAMEI

LAND DEVELOPMENT

Earth work in hill cutting i/c disposal of excavated earth leath upto 1.5 metres disposed earth to be leveled and neatly dressed

EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressingcomplete with a lead of 15 km

CEMENT CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (a) C.C. 1:4:8 (1 cement :4 Kanhaighat coarse sand :8 graded stone aggrt. 40mm nominal size).

Polygonal rubble masonry ( uncoursed / brought to courses ) squared rubble masonry (uncoursed /brought to courses ) with hard stone of approved quality in foundation & plinth in cement mortar 1: 6 (1 cement:6 coarse sand) i/c levelling up with cement concrete 1:6:12 (1 cement:6 coarse sand:12 stone aggregate 20 mm nominal size) at plinth level.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement1: 1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level.

Steel Reinforcement for R.C.C. work including bending, binding and placing in position complete. (b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(d) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(e) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(b) Flat surfaces such as suspended floor, roofs landings and the like floors etc. upto 200mm in thickness.

BRICK WORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand) For Septic Tank

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 3 kanhaighat coarse sand) in superstructure.

25mm cc flooring 1:2:4 (1cem:2 c/sand :4 st. aggrt.20mm & down gauge ) finished with a floating coat of neat cement.

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position a) Local best quality Uningthou

P/F 40 mm thick panelled, glazed or panelled & glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (ordinary type) with necessary screws .a) Local best quality Uningthou

Providing and fixing bright finished brass hand drawn hooks & eyes. ( a) 150mm

Providing & fixing Brass Sliding door bolts bright finished or black enamelled with nuts & screws etc. complete (a) 250x16 mm

Providing & Fixing Brass Tower bolts with screws & nuts complete, (a) 250x10 mm

Supplying door & window clamps with 40mm x 6 mm FB 80 Cm long i/c bends

Providing & fixing Brass Handles with screws & nuts complete,(a) 125mm

STEEL WORKS

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrom primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete.(a) Electric resistant welded tube (Conforming to IS : 1611 - 1979).

ROOFING, CEILING &GABLE

Trazoidal pre painted profile sheet roofing of approved brand DYNA Roof or equivalent with seltdrilling screws of 68 mm long Xylon coated screws with PVC washer & Cap complete , excluding thecost of purlin & trusses 1) Prepainted Galvalume sheet (PPGL) i) Profile sheet 0.50 mm / 4.2 kgs / sqm

Trapizoidal pre -painted profile sheet for ridges gutter or valley 610 mm wide of approved brand DYNA roofor equivalent fixed with seld drilling screws of 68 mm long xylon coated screws with PVC washer & capscompleted excluding the cost of purlins rafter & trussesi) Pre painted Galvalume sheet (PPGL) i) profile sheet 0.50 mm /4.2 kgs /sqm

Providing wood work in frame of false ceiling, partition etc sawn and put up in (b) Uchan/Tairen Wood

3mm thick assamited hard board sheet ceiling with beading 62x12mm of uchan wood complete (frame work to be paid separately)

Providing & fixing M.S. grills of required pattern to wooden frames of window etc. with M.S. flats at required springs & frames all round bars with round headed bolts & nuts or by screws (a) ornamental grill.

Providing & fixing in position collapsible steel shutters with vertical channels 20 mm X 10 mm X 2 mm & braced with flat iron diagonals 20 mm X 5 mm sizes with top & bottom rails of T iron 40 mm X 40 mm X 6 mm with 38 mm dia steel pullets complete with bolts & nuts, looking arrangement, stoppers, handles i/c applying a priming coat of red lead paint.

FLOORING WORKS

50 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

FINISHING

12mm cement plaster 1:3 (1 cement : 3 Kanhaighat coarse sand).

15mm cement plaster 1:3 (1 cement : 3 Kanhaighat coarse sand).

Neat cemet punning

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting two or more coats (excluding priminof appd. quality in all shades on new work to give an even shade.g coat) with superior ready mixed paint for wood work

Applying ready mixed priming coat (garware red lead of approved quality) on steel work.

Painting (two or more coats excluding priming coat) with synthetic enamel paint of approved quality all shades except black or chocolate on steel on new work to give an even shadee.

Distepering with dry distemper of approved quality on new work i/c priming coat of whiting to give an even shade

P/F 75mm to 60mm rounded hand rails in straight lengths complete in uningthou wood.

P/F 75mm to 60mm Uningthou wood scrols to suit to rounded hand rails (dia of scrols tvo be three times the width of hand rails 75mmx60mm).

P/F rounded nosings 75mm wide & 30mm to 40mm thick, fixed to edges of landings to match stairtreads rebated to suit thickness of flooring as required tongued & grooved i/c returned edgescomplete in Uningthou wood.5mm to 60mm Uningthou wood scrols to suit to rounded hand rails (dia ofscrols tvo be three times the width of hand rails 75mmx60mm)

P/F20 mm thick plank as eave board with (a) Tolhao/Uchan wood

MISCELLANEOUS

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 kanhaighat coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground

(B) WATER SUPPLY & SANITARY INSTALLATION

PIPE FITTING

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc.( External )

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc.(Internal work) (a) 15mm Diameter.

Providing and fixing 610 X 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws .

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle level) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) white vetreous china orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests.

Providing and Fixing wash basin with C.I. brackets, 15mm dia cp Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White vitreous china Wash basin size 550X400mm with a 15mm cp Brass single hole basin mixer.

Providing and fixing brass stop cock of approved quality.(a) 15mm diameter.

Providing and fixing 100 mm HCI soil ,waste & vent pipes

Providing and fixing 50 mm HCI soil ,waste & vent pipes

Providing and fixing C.P. bib cock of approved quality. (a) 15 mm diameter.

P/F Brass full way G.M valve with C.I wheel of approved quality (a) 25mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.(i)1000 litres net capacity storage tanks

( C ) TOUSEM

Earth work in hill cutting i/c disposal of excavated earth leath upto 1.5 metres disposed earth to be leveled and neatly dressed

EARTH WORK

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressingcomplete with a lead of 15 km

CEMENT CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (a) C.C. 1:4:8 (1 cement :4 Kanhaighat coarse sand :8 graded stone aggrt. 40mm nominal size).

Polygonal rubble masonry ( uncoursed / brought to courses ) squared rubble masonry (uncoursed /brought to courses ) with hard stone of approved quality in foundation & plinth in cement mortar 1: 6 (1 cement:6 coarse sand) i/c levelling up with cement concrete 1:6:12 (1 cement:6 coarse sand:12 stone aggregate 20 mm nominal size) at plinth level.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement1: 1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level.

Steel Reinforcement for R.C.C. work including bending, binding and placing in position complete. (b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(d) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(e) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(b) Flat surfaces such as suspended floor, roofs landings and the like floors etc. upto 200mm in thickness.

BRICK WORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand) For Septic Tank

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sand) in superstructure.

25mm cc flooring 1:2:4 (1cem:2 c/sand :4 st. aggrt.20mm & down gauge ) finished with a floating coat of neat cement.

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position a) Local best quality Uningthou

P/F 40 mm thick panelled, glazed or panelled & glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (ordinary type) with necessary screws .a) Local best quality Uningthou

Providing and fixing bright finished brass hand drawn hooks & eyes. ( a) 150mm

Providing & fixing Brass Sliding door bolts bright finished or black enamelled with nuts & screws etc. complete (a) 250x16 mm

Providing & Fixing Brass Tower bolts with screws & nuts complete, (a) 250x10 mm

Supplying door & window clamps with 40mm x 6 mm FB 80 Cm long i/c bends

Providing & fixing Brass Handles with screws & nuts complete,(a) 125mm

STEEL WORKS

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrom primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete.(a) Electric resistant welded tube (Conforming to IS : 1611 - 1979).

ROOFING, CEILING &GABLE

Trazoidal pre painted profile sheet roofing of approved brand DYNA Roof or equivalent with seltdrilling screws of 68 mm long Xylon coated screws with PVC washer & Cap complete , excluding thecost of purlin & trusses 1) Prepainted Galvalume sheet (PPGL) i) Profile sheet 0.50 mm / 4.2 kgs / sqm

Trapizoidal pre -painted profile sheet for ridges gutter or valley 610 mm wide of approved brand DYNA roofor equivalent fixed with seld drilling screws of 68 mm long xylon coated screws with PVC washer & capscompleted excluding the cost of purlins rafter & trussesi) Pre painted Galvalume sheet (PPGL) i) profile sheet 0.50 mm /4.2 kgs /sqm

Providing wood work in frame of false ceiling, partition etc sawn and put up in (b) Uchan/Tairen Wood

3mm thick assamited hard board sheet ceiling with beading 62x12mm of uchan wood complete (frame work to be paid separately)

Providing & fixing M.S. grills of required pattern to wooden frames of window etc. with M.S. flats at required springs & frames all round bars with round headed bolts & nuts or by screws (a) ornamental grill.

Providing & fixing in position collapsible steel shutters with vertical channels 20 mm X 10 mm X 2 mm & braced with flat iron diagonals 20 mm X 5 mm sizes with top & bottom rails of T iron 40 mm X 40 mm X 6 mm with 38 mm dia steel pullets complete with bolts & nuts, looking arrangement, stoppers, handles i/c applying a priming coat of red lead paint.

FLOORING WORKS

50 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

FINISHING

12mm cement plaster 1:3 (1 cement : 3 Kanhaighat coarse sand).

15mm cement plaster 1:3 (1 cement : 3 Kanhaighat coarse sand).

Neat cement punning

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting two or more coats (excluding priminof appd. quality in all shades on new work to give an even shade.g coat) with superior ready mixed paint for wood work

Applying ready mixed priming coat (garware red lead of approved quality) on steel work.

Painting (two or more coats excluding priming coat) with synthetic enamel paint of approved quality all shades except black or chocolate on steel on new work to give an even shadee.

Distepering with dry distemper of approved quality on new work i/c priming coat of whiting to give an even shade

P/F 75mm to 60mm rounded hand rails in straight lengths complete in uningthou wood.

P/F 75mm to 60mm Uningthou wood scrols to suit to rounded hand rails (dia of scrols tvo be three times the width of hand rails 75mmx60mm).

P/F rounded nosings 75mm wide & 30mm to 40mm thick, fixed to edges of landings to match stairtreads rebated to suit thickness of flooring as required tongued & grooved i/c returned edgescomplete in Uningthou wood.5mm to 60mm Uningthou wood scrols to suit to rounded hand rails (dia ofscrols tvo be three times the width of hand rails 75mmx60mm)

P/F20 mm thick plank as eave board with (a) Tolhao/Uchan wood

MISCELLANEOUS

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 kanhaighat coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground

(B) WATER SUPPLY & SANITARY INSTALLATION

PIPE FITTING

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc.( External )

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc.(Internal work) (a) 15mm Diameter.

Providing and fixing 610 X 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws .

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle level) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) white vetreous china orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests.

Providing and Fixing wash basin with C.I. brackets, 15mm dia cp Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White vitreous china Wash basin size 550X400mm with a 15mm cp Brass single hole basin mixer.

Providing and fixing 100 mm HCI soil ,waste & vent pipes

Providing and fixing 50 mm HCI soil ,waste & vent pipes

Providing and fixing brass stop cock of approved quality.(a) 15mm diameter.

Providing and fixing C.P. bib cock of approved quality. (a) 15 mm diameter.

P/F Brass full way G.M valve with C.I wheel of approved quality (a) 25mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.(i)1000 litres net capacity storage tanks

IEI COMPONENT (A)TAMENGLONG

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in PVC cassing capping with modular type switch, modular plate,suitable size GI box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC cassing and capping along with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC cassing and capping etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

2X10mm2+1X10mm2 earth wire

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recess PVC conduits etc.as reqd.

2X16mm2+1X16mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 25mm2 four core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6PL1W010 complete with connection as rqd. (Havell's)

S/F Fancy wall bracket suitable for 9/12W complete with all accessories i/c connection etc. as reqd.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

S/F step type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP65 Flood Light Luminaries with high power COB LED as light source Havells LHEPBFUEIN6W050 complete with connection as reqd. (Havells)

Supplying & installation of carbon dioxide type fire extinguisher suitable for fires involving materials like oil, electric & delicate machineries) capacity: 4.5 kg (ISI marked).

S/F bus bar chamber with 4 strips copper bus bar length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc.as reqd.

S/F wall/floor mounted metal board of welded constn.fabricated with minimum 50mm X 50mm X6mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/flat iron for mounting of switch gear i/c painting etc.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with copper plate 600x600xmm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)

Extra for using salt and charcoal for G.I.plates or copper plate earth electrode as reqd.

P/F 4.00 mm dia copper wire on surface or in recess for loop earthing as reqd.

(B) Tamei

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in PVC cassing capping with modular type switch, modular plate,suitable size GI box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC cassing and capping along with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC cassing and capping etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

2X10mm2+1X10mm2 earth wire

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recess PVC conduits etc.as reqd.

2X16mm2+1X16mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 25mm2 four core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6PL1W010 complete with connection as rqd. (Havell's)

S/F Fancy wall bracket suitable for 9/12W complete with all accessories i/c connection etc. as reqd.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

S/F step type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP65 Flood Light Luminaries with high power COB LED as light source Havells LHEPBFUEIN6W050 complete with connection as reqd. (Havells)

Supplying & installation of carbon dioxide type fire extinguisher suitable for fires involving materials like oil, electric & delicate machineries) capacity: 4.5 kg (ISI marked).

S/F bus bar chamber with 4 strips copper bus bar length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc.as reqd.

S/F wall/floor mounted metal board of welded constn.fabricated with minimum 50mm X 50mm X6mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/flat iron for mounting of switch gear i/c painting etc.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with copper plate 600x600xmm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)

Extra for using salt and charcoal for G.I.plates or copper plate earth electrode as reqd.

P/F 4.00 mm dia copper wire on surface or in recess for loop earthing as reqd.

(C) Tousem

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in PVC cassing capping with modular type switch, modular plate,suitable size GI box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC cassing and capping along with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC cassing and capping etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

2X10mm2+1X10mm2 earth wire

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recess PVC conduits etc.as reqd.

2X16mm2+1X16mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 25mm2 four core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6PL1W010 complete with connection as rqd. (Havell's)

S/F Fancy wall bracket suitable for 9/12W complete with all accessories i/c connection etc. as reqd.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

S/F step type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP65 Flood Light Luminaries with high power COB LED as light source Havells LHEPBFUEIN6W050 complete with connection as reqd. (Havells)

Supplying & installation of carbon dioxide type fire extinguisher suitable for fires involving materials like oil, electric & delicate machineries) capacity: 4.5 kg (ISI marked).

Design, supply, installation testing and commissioning of L.T.Panel board of dust and vermin proof mounted with thickness of 16 SWG metal clad sheet with suitable for use at 3- Phase, 4 pole,50 Hz 415V fitted with the following switch gears of four way outgoing conforming to IS/IEC:60947-2, HSN Code 8537 :-

1. 200 amp. TPN on load changeover switch - 1 No.

2. 200 amp. TPN bus bar chamber - 1 No.

3. 125 amp. TPN thermal adjustable MCCB - 4 Nos.

S/F bus bar chamber with 4 strips copper bus bar length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc.as reqd.

S/F wall/floor mounted metal board of welded constn.fabricated with minimum 50mm X 50mm X6mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/flat iron for mounting of switch gear i/c painting etc.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with copper plate 600x600xmm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)

Extra for using salt and charcoal for G.I.plates or copper plate earth electrode as reqd.

P/F 4.00 mm dia copper wire on surface or in recess for loop earthing as reqd.

M Gunananda Sharma