SPECIAL REPAIR AND REPLACEMENT OF UNSERVICEABLE STREET LIGHT,LT UG ALLIED WORKS, INTERNAL ELECTRIFICATION OF POWER HOUSE AND WATER SUPPLY PIPE LINES AND ADDITIONAL and ALTERATION TO CONFERENCE HALL AT AF STATION BORGAD

Amount

Dismantling old/unserviceable LT PCC /Steel pole 9 mtr height including all fittings, any type and size and removing the dismantled mtrl from site complete all as specified and directed by Engr -in-charge.

Taking down old / unserviceable LT cable, and making good the disturbed surface of wall complete all as specified and directed by Engr -in-charge.

Taking down of old /serviceable street light fitting with bracket any type, refixing the same on another location domestic area including all electrical connection complete all as specified and directed by Engr -in-charge.

S&F Hot Dip Galvanised Octagonal GI Pole 7 mtr long with dome, top dia 70 mm and bottom dia 130 mm, 3 mm thickness of sheet , fixing on base plae 200X200X12 mm with foundation nut & bolt of size 4XM20X700. including all earth work and RCC foundation as recommeded by OEM design with 63 mm Flexible pipe for cable entry complete all as as directed by Engr-in-charge.Make Surya Cat Pt No- SRL-OP-703 or equvalent in Bajaj and Crompton.

S&F Octagonal GI Pole bracket Double arms 1.50 mtr long, fixing withsuitable nut bolt and washer as described in OEM manual complete all as as directed by Engr-in-charge.Make Surya cat pt No SBA-02 or equivalent in Bajaj, CG.

Supply and Installation, LED street light fittings 90 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, input voltage 140-270V, PF >0.95 Make Crompton CAT No CRP-411-90-57-SL-GL-NSG or equivalent in Phillips /Havells. complete all as specified and directed by Engineer- in-charge..

Supply, Installation, Testing and commissioning LED Flood light fittings 120 watt with 110 lm/ watt system lumen output . The luminaire should have cool white coloure temperature with minimum 5700K . The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, input voltage 140-270V, PF >0.95 Make Crompton CAT No TFS-504-120-57-60D-SL-GL-HSG or equivalent in Havells/ Philips.complete all as specified and directed by Engineer- in-charge.

Supply and fix digital Time digital switch with built in Sheet metal enclosure for street light , Make- Indo asian TL 032080or equivalent of GEC/ GIC/ Havells/ L&T

S&F PVC insulated and weather proof three core copper multi stranded conductor cable 1.5 Sqmm size as required length from junction box to street light connector of Street Light fittings all as specified & as directed by Engr-in-Charge.

Supply and laying in trenches/ducts or passing through pipe 1100 volt grade LTUG cable with XLPE insulated armored heavy duty electric cable multistanded with aluminium conductor 1100V grade 4 core cross sectional area 10 sqmm ISI Marked all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 meter in depth and getting out in soft/loose soil all as directed.

Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm all as directed.

Removing of surplus soil not exceeding 50 meter and depositing where directed at a level not exc 1.50 mtr above the starting point all as directed.

Supply and laying Double walled corruyated (DWC) Duct (Dura- Guard) as per IS-14930 Part - II for LT UG cable protection including coupler, elbows, T- Joint, Bends, etc and test report Make :- Dura- line/Gemini/Rex, Prince Of size 38mm inner dia.

Supply and fix 40mm dia bore galvanized iron tubing, light grade including all fitting for cable protection etc laid in floor or fixed to poles with clamps etc all as specified and directed.Make- Prakesh surya/Swastik/Jindal.

Material and laboure for plain cement concrete 1:4:8 type D2 using 40mm garded stone aggregate as in coping concrete on floor/wall etc all as specified and directed.

Supply & Fix in repair PVC perplex cover globe type with Base plate /holder not less than 8 inch dia suitable for Post top lantern including one nos 7/9 watt LED lamp complete all as specified and directed by Engineer- in-charge.Make - Crompton/Phillips/Havells.

Supply & Fix in repair LED Post top lantern weather proof indirect lighting solution Make Cormpton Cat Pt No LPTC-40-CDL or equivalent in Havells/Bajaj.complete all as specified and directed by Engineer- in-charge.

Supply & Fix in repair LED bollard light pressure die cast powder costed housing with PC diffuser efficent high out put woith IP-65f Make Crompton Cat Part No LBLTW-10-CDL or equivalent in Phillips/ Havells.complete all as specified and directed by Engineer- in-charge.

Supply & Fix in repair LED land scap light pressure die cast powder costed housing with PC diffuser efficent high out put woith IP-65f Make Crompton Cat Part No LBLAI-10-CDL or equivalent in Phillips/ Havells.complete all as specified and directed by Engineer- in-charge.

M&L for Checking the serviceability of BPI tank at borgad top 4 nos X15000 Itrs capacity incl repair/ maintenance of any type of leakage, damaged & rusted portion by wielding and cleaning of tanks with removal of sludge/dust/dirt etc, including all testing as per OEM Instruction complete all as directed by Engr- in-charge comprising with the following- (1). Taking out the sludge from all tanks (15 KL) and cleaning the complete inner portion of BPI tanks-04 nos Tanks (ii) Painting of all MS portion of BPI tank with inner portion of tanks, pipeline, vent pipe, valves chambers and wall etc. (i) Replacement of existing manhole gaskets-04 nos (iv) Replacement of SS 304 Nut Bolt of existing size-100 nos (v) Replacement of Vent pipe 1.5" with vent houd on top-01 No (vi) S&F vent Valves as per sample-04 No (vi) S&F vent pipe of existing size - 1 No

Supply and fixing electrically operated automatic rolling shutter motor 750 watt, 230 Volt minimum output torque 1100 NM, min RPM-3.2 with complete gear box chain, bracket etc incl all electrical connection with operating switch copper cable, both side as required at site for smooth functioning of existing rolling shutter installed at power house at Borgad top

Taking down existing copper/aluminum existing point wiring (light/fan/socket or power points) complete (fittings such as switches,ceiling roses,pendents, regulators, sockets etc to be measured saperatly) incl wooden battens and conduct etc & removing material as directed complete all as specified and as directed by Engr-in-Charge.

M&L for Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run in and including surface in wall/celling/floor in PVC casing caping/PVC conduit as reqd as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including PVC boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr-in-Charge.

All as per item no 24 but for One 5 Amps socket point on same/below board with other switches.

All as per item no 24 but for One 5amps switch socket point independent.

M&L for Point wiring with 2.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run including surface in wall/celling/floor in PVC casing caping/PVC conduit as reqd as per IS with all fittings such as bends, tee, junction boxes,etc of suitable size including 2.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including PVC moduler box with inner and outer plate boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge. Note - Cutting and making good of chasis in wall/roof/floor is included in the qtd rates.

Supply and fix in repair Modular switch one way 6 Amp,1 Module , Make Anchor/Roma/Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Modular switch one way 16 Amp, 1 Module , Make Anchor/ Roma,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Modular Fan regulator electronic step type 230 V 2 Module. Make : Anchor/Roma / Legrand Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Modular Socket outlet 6A/16 Amps 2/3 pin combined 2 module Make : Anchor/Roma. ,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Modular Socket outlet 6 Amps 2/3 pin combined 2 module Make : Anchor/Roma ,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Ceiling rose surface type, PVC/Polycarbonate isolated body size 50x28 mm three terminals. Make : AnchorHavells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair decorative ultra slim square profile linear Light Linea lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 20W LED 6000K, complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No. CCS-103-20-65-SL-DP-NWH or equivalent in Phillips/Havells.

Supply and fix in repair decorative ultra slim square profile linear Light Linea lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 10 W LED 6000K, complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No.CCS-103-10-65-SL-DP-NWH or equivalent in Phillips/Havells.

M&L wiring for circuit/ sub main wiring of 2x1.5 Sqmm + 1x1.5 Sqmm earth wire, alongwith earth wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in including PVC casing caping/ PVC conduit complete all as directed by Engr -in- Charge.

M&L wiring for circuit/ sub main wiring of 2x2.5 Sqmm + 1x2.5 Sqmm earth wire, alongwith earth wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in including PVC casing caping / PVC conduit complete all as directed by Engr -in- Charge.

M&L wiring for circuit/ sub main wiring of 2x4 Sqmm + 1x4 Sqmm earth wire, alongwith earth wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in including PVC casing caping / PVC conduit complete all as directed by Engr -in- Charge.

Supply, Installation, Testing and commissioning LED street light fittings 45 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, Make Crompton CAT No LSTS-45-CDL/NL-M or equivalent in Havells/ Phillips.complete all as specified and directed by Engineer- in-charge.

Supply, Installation, Testing and commissioning LED high bay light 120 watt with 110 lm/ watt system lumen output . The luminaire should have cool white coloure temperature with minimum 5700K . The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, Make Crompton CAT No LHB11-120-CDL/60M or equivalent in Havells/ Philips.complete all as specified and directed by Engineer- in-charge.

Supply and fix sheet metal distribution board 415volt,Vertical TPN 4 Way with provision for DHx100 series MCCB of legrand make as incomer and SP/TP MCBs as outgoing as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/reccess mounting IP-43 protection of L&T Cat No DBVTL004GD or equivalent in Legrand/Siemens.,Complete all as specified & as directed by Engineer-In-Charge.

S&F MCCB TP ,Thermal magnatic with enclouser , 415 Volts,50 HZ, 30 KA, 100 Amps DU-100H Cat No CM9789400k2 of L&T or equivalent Model of Legrand, Siemens.,Complete all as specified & as directed by Engineer-In-Charge.

Supply & Fix in repairs MCB TP 32 Amps 415 volts 50HZ of Legrand Cat No 4086 58 or equivalent in L&T /Seimens. ,Complete all as specified & as directed by Engineer-In-Charge.

Supply & Fix in repairs MCB SP 32 Amp 230 Volts, 10 KA Legrand Cat Pt No-408595 50HZ of Legrand Cat No 4086 58 or equivalent in L&T /Seimens. ,Complete all as specified & as directed by Engineer-In-Charge.

Taking up or down old rusted CI pipe passing through under road ,clvert, bldgs/RCC/pavers block etc , complete all as specified and as directed by Engineer-In-Charge.

Supply & Fix DI (Ductile iron ) water pipes with spigot and socket ends K-9 with all fitttings and fixed in trenches, for bore of 150 mm diameter,including Drilling and Tapping cast iron water mains (in Position) for branch connections of the internal dia. complete all as specified and as directed by Engineer-In-Charge.

All as per item no 46 above but of bore 100 mm dia

Taking up or down old rusted water tubing and connections fixed to wall floor, celing for bore of 15 mm dia , complete all as specified and as directed by Engineer-In-Charge.

All as per item no-48 but bore 20 mm dia

All as per item no-48 but bore 50 mm dia

Supply & Fix GI water tubing medium grade with all fitttings and fixed to wall, floor,in trenches, ceiling for bore of 15 mm diameter, complete all as specified and as directed by Engineer-In-Charge.

All as per item no 51 above but of bore 20 mm dia

All as per item no 51 above but of bore 50 mm dia

Supply & Fix in replacement of Bronze gate valve (Hex type) ISI marked screwed both ends of 50 mm diameter Art No 1006 of Make: Zoloto or Equivalent in Leader/L&T complete all as specified and as directed by Engineer-In-Charge.

All as per item no 54 above but of bore 20 mm dia

Excavation in trenches n. exc 1.5 Mtr width and n.exc 1.5 mtr deep for foundation, laying GI pipes in hard and dense soil and getting out,complete all as specified and as directed by Engineer-In-Charge.

Returning filling in incl spreading leveling watering and well ramming in layers not exceeding 25 cm levers of soil, complete all as specified and as directed by Engineer-In-Charge.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5 above the starting point, complete all as specified and as directed by Engineer-In-Charge.

Dismantling and taking out old unserviceable CI sluice valve from existing position and Supply & Fix CI sluice valve ISI marked PN-1 confirming to IS14846 both ends flanged with brass stem /spindle and check nut with solid wedge of trim copper alloy gland packing lubricated hemp jule flange as per IS-1538, iron wheel head check nuts etc including jointing with rubber gaskets, nuts, bolts and washer of sizes 150 mm dia Art No 1079A of Make:Zoloto or Equivalent in Leader/Kirloskar complete all as specified and as directed by Engineer-In-Charge.

All as per Sl. Item No.59 here in before but of sizes 100 mm dia Art No 1079A of Make:Zoloto or Eqivalent in Leader/Kirloskar ,complete all as specified and as directed by Engineer-In-Charge.

Supply,& fixing Air release valve 150 mm complete all as specifed and as dirrected

Supply,& fixing Air release valve 100 mm complete all as specifed and as dirrected

M&L construction of valave chember of 120X120X120 mm internal dimenion complete brick work masonary of 23 thick in cement morter 1.6 on PCC having wall thickness of 0.26 mtr 1:3: 10 mm thick at the Top of brick wall using 20 mm graded stone aggregates and 10 mm thick plastering in cement mortar 1:4 in exposed brick or concrete surface & MS cover of 3.15 mm thickness incl 40X40X6 mm angle iron frame fixed ith the same size of angle iron hold fas, handle with locking arrangememnts & two coat of syntheic enemel paint and two coat of white wash on plaster concrete surface complete all as specified and as dorected .

S & F Solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification & drawing

S & F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specifications & drawing

MAHIMA CONSTRUCTION

M/s M R MAHANA

SHRI SULAI ELECTRICALS

United Enterprises