REPAIR MAINT TO FLOORING JOINERY PLUMBING SANITARY FITTINGS INCLUDING REPAIRS TO SEEPAGE LEAKAGE AND PERIODICAL SERVICES TO CERTAIN BLDGS IN OTM MD ACCN AREAS OF AGE BR I UNDER GE MIS MHOW

Amount

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified

M&L for brickwork with sub class 'B' modular bricks, straight or curved on plan exceeding 6 m mean radius, built in CM 1:6 complete all as specified

M&L brick work with using sub class `B ` modular bricks a in half brick wall , straight or curved on plan exceeding 6.0m mean radius built in CM 1:4 complete all as specified

M&L for rendering 15 mm thick in CM ( 1:4 ) mixed with water proofing compound on wall / concrete surfaces finished even and smooth without using extra cement complete all as specified Note: WPC shall be measured and paid separetly under relevant item

M&L for rendering 10 mm thick in CM ( 1:6 ) on wall / concrete surfaces finished even and smooth without using extra cement complete all as specified

M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified

Supply only Liquid water proofing compound

M&L for preparation of newly plastered surface by using sand paper to make the surface even and smooth and applying 1 mm thick JK / BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion ) over a coat of white water base primer complete all as specified .

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified

M&L for applying two coats of oil bound distemper over a coat of 1mm thick wall care putty (JK / Birla) on new plastered surface of walls including preparation of surface complete all as specified.

M&L for preparing new plastered surface of wall and applying three coats of white wash on ceiling and cornices complete all as specified

M&L for complete removal of existing treatment from wall of any description and applying two coats of exterior weather proof water base emulsion paint white / coloured over a coat of oil base base primer over a coat of white cement based putty (wherever required) all as specified.Note: Putty shall be measured and paid separately under relevant item.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down,smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white / coloured over a coat of oil base base primer over a coat of white cement based putty (wherever required) all as specified Note: Putty shall be measured and paid separately under relevant item.

M&L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling Birla white putty and applying one coat of cement based paint over a coat of primer complete all as specified

All as per item No. 15 above but for two coats of cement base paint

M&L for complete removal of existing treatment on old decorated surface of wall and applying two coats of oil emulsion distemper white / coloured over a coat of birla wall care based putty (wherever required) all as specified Note:- Putty shall be measured and paid seperately under relevant item

M&L for applying one coat of 1mm thick wall care putty on wall /ceiling including preparation of surface all as specified

M&L for preparation of old decorated surfaces of wall including brooming, washing, rubbing scraping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of oil emulsion distemper all as specified

M&L for preparation of old decorated surfaces of wall including brooming, washing, rubbing scraping down with complete removal Smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of white wash on walls complete all as specified

All as per item No. 20 above but on ceiling.

M&L for preparation of old painted surfaces of wood / wood based materials exceeding 10cm in width or girth and applying one coat of synthetic enamel paint all as specified.

All as per item No. 22 above but on steel surfaces.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish off the primeses complete all as specified

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified

M&L for 40mm thick PCC 1:2:4 type B1 using 20 mm graded stone crushed stone aggregate as in flooring complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified

M&L for glazed ceramic coloured tiles of size 300x200x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified .

M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified

M&L for 75 mm thick PCC1:4:8 type D2 using 40mm graded stone aggregate as in foundation, sub base of floor, etc complete all as specified

M&L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in floor / plinth protection finished the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified

M&L for chequered cement concrete tiles with grey cement and pigment of size 20cmX20cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified

M&L for 20 mm thick granite (green marble) machine cut, in floor bedded and jointed with grey ement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including grinding and polishing by using mechanical grinder and moulding edges compete all as specified and as directed.

M&L for 20 mm thick granite (black) machine cut as in skirting /dado laid over including 10 mm thick backing in CM (1:4) and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing by using mechanical grinder and moulding edges compete all as specified and as directed.

S&F in repairs 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) three layered,hoisted and fixed in position all as specified in SSR Part-I

M&L for Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 litres but not exceeding 500 litres complete all as specified

S&F in repair 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Minimum Weight -142 gms)

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Minimum Weight -210 gms)

Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections complete all as specified

Taking up or down 20 mm dia old serviceable / unserviceable steel tubing any grade and connections complete all as specified

S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified

All as per item no 45 above but for 20mm bore pipe

S&F in repairs 15 mm CP long neck bib taps screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified

S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified

S&F in repais 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified

S&F in repair stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified

S&F in repair pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified

S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F in repairs 15mm wall mixture including provision for bath telephone shower and overhead shower all as specified Make. Prayag or Jaquar or other equivalent as approved by GE.

S&F in repairs wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe of 15mm dia complete all as specfied

S&F in repairs concealed stop valve fancy type chromium plated with long shanks and cup fixed to 15 mm dia bore pipes complete all as specified

S&F in repairs stainless steel sink 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm complete all as specified

S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified

S&F in repairs stainless steel plate rack 1mm thick for kitchen of best quality with suitable hanging arrangement for fixing rack to wall complete all as specified and as directed by Engineer-in-Charge.Note:- Size of plate rack shall not be less than 900mmx1200 mm and weight of rack shall not be less than 8.5 Kg each.

S&F in repairs PVC low level flushing cistern of 10 Litres capacity with all internal fittings including flush pipe and fixing to supply pipe

Taking down and re-fixing of WHB / flushing cistern / EWC / kitchen sink and similar items at same or other location, including cutting for ends and pinning in and ends of brackets or errecting stand but exclusive of fixing of supply and waste pipes,etc complete all as specified

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe , lime concrete bedding and 'P' or 'S' trap complete all as specified and as directed.

S&F in repair health faucet with flexible pipe of one metre length including wall hook complete all as specified

S&F in repair flexible type PVC waste pipe 32 mm bore for WHB/Sink /urinal etc complete all as specified

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating ,dia of outlet 75mm bore including joining to waste pipe with solvent cement complete all as specified

S&F in repairs brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets complete all as specified

S&F in repair CP towel ring dia not less than 200mm complete all as specified

S&F in repair CP toilet paper holder complete all as specified and as directed.

S&F in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified

S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified

S&F in repairs wash basins, vitreous China white flat back of size 580x450mm including cutting for and pinning in ends with and including MS adjustable brackets or erecting stand complete all as specified

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repair corner glass shelf with bracket all as specified and directed

S&F in repair 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified

S&F in repair CP grating 100mm dia

S&F in repair 25 mm dia aluminium powder coated drappery curtain rod with brass /niickel chrome polish bracket complete all as specified

S&F in repairs CP waste coupling of size 32 mm dia for WHB with long screwed shanks and fly nut complete all as specified .

M&L resecuring or easing and adjusting without taking down shutter of any description not exceeding 1.0 sqm each

M&L resecuring or easing and adjusting without taking down shutter of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each

S&F in repair aluminium anodised, barrel tower bolt of length 100mm extruded section.

S&F in repair aluminium anodised, barrel tower bolt of length 150mm extruded section.

S&F in repair aluminium alloy, anodised, sliding door bolt of length 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section

S&F in repair 150 mm long aluminium handle, cast type, anodised fixed to shutters complete all as specified

S&F in repair 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified

S&F in repair 75 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified

S&F in repair 50 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified

M&L for cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar 1:4 ,cutting depth not exceeding 10 cm complete all as specified

S&F in repair cupboard knob 40mm dia fixed with nuts, screw and washer of mild steel bright finshed

S&F in repair floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor

S&F in repair Mild Steel Door Spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repairs of Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane

Taking down shutters of any description not exceeding 1.0 sqm each complete all as specified

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 Sqm each complete all as specified

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area not exceeding 1.5 sqm each complete all as specified

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exceeding 1.5 sqm but not exceeding 4.0 sqm each complete all as specified

S&F second class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified

S&F second class hard wood 35 mm thick glazed and skeleton door shutter , open rebated and prepared to receive glass, gauge etc, (with sash bars) edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified

S&F 30mm thick factory made, second class hard wood, glazed and skeleton window / ventilator shutter, open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified

S&F 35mm thick second class hard wood plain, framed pannelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneer on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified

S&F 30 mm thick flush shutter solid core construction with block board core and plywood face panel , commercial type on both sides complete all as specified

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with mild steel square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges shall be painted to match with printed sheet complete all as specified

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed

S&F 75 mm Butt hinges medium weight cold rolled mild steel and fixed

S&F 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified

S&F stainless steel butt hinges 100mm size medium weight and fixed

S&F Aluminium anodised barrel tower bolts of extruded section, 150mm long

S&F Aluminium anodised barrel tower bolts of extruded section, 200mm long

S&F extruded aluminium alloy handles fabricated type anodised 100 mm size

S&F extruded aluminium alloy handles fabricated type anodised 150mm size

S &F second class hardwood small fittings such as door and window stops and the like not exceeding 200 cucm each

S&F galvanaised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specified

Hacking out old broken glass of any thickness, size, quality or description from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads ,Supply and fix sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specified

S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares not exceeding 0.5 sqm in each pane complete all as specified

S&F figured glass pin head type 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 sqm in each pane complete all as specified

S&F in repair galvanised stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples complete all as specified

M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with and including wood putty all as specified

M&L for cleaning of roof slab /chajja by sweeping with brooms,removing all depositions / mud / vegetations etc and removing the spoil to a distance n.exc 50m all as specified

M&L for cutting of shubs,vegetation including small trees,grass,bush,weed and under growth roots and saplings n.exc 30cm in girth on wall / roof / chajja upto 15 m height including provision of necessary safety machanisum,rope belt, scaffolding / ladder etc as required and removing rubbish to a distance n.exc 50 m and clearing off site all as specified

S&F in repair veneered decorative plywood 12mm thick grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified

S&F in repair block board 18/19 mm thick grade 1 quality, exterior grade, decorative type with decorative face veneer on both faces fixed with screws to timber frame work complete all as specified

S&F in repairs second class hard wood beads, straight (not exceeding 40 Sqcm) for glazed or gauzed joinery, renewed, including mitres etc.complete all as specified

NIDHI CONSTRUCTION

BHATIA ASSOCIATES

Chitragupta Construction

M/S Sunshine Construction

M/s Ravi Traders

Jamna Constructions

PARIDHI CONSTRUCTION

GAUR ASSOCIATES