THE WORK FOR HEIGHT RAISING and SHIFTING OF 132KV MORADABAD GULABBARI LINE 132KV MORADABAD RAMPUR CKT-II UNDER ELECTRICITY TRANSMISSION DIVISION-II MORADABAD

Amount

HEIGHT RAISING & SHIFTING OF 132KV MORADABAD- GULABBARI LINE/132KV MORADABAD-RAMPUR CKT-II LINE (Between Tower Loc No. 292 to Tower Loc No. 290) ON BEHALF OF UP STATE BRIDGE CO. LTD. CORRIDOR UNDER ELECTRICITY TRANSMISSION DIVISION-II, MORADABAD.

SUPPLY PORITION

TOWER

Hot dip galvanised , Hexagon ,round hexagon head transmission tower bolt,nuts washer for above tower structure as per BOM (11.660x2+3.620x2+231.640x2+129.560x2 = 752.96 Kg.)

TOWER & CONDUCTOR ACCESSORIES .

FOR ACCC HTLS (COPENHEGEN) CONDUCTOR.

Pipe Type Earthing material for Tower

Double Suspension Fitting suitable for ACCC HTLS (COPENHEGEN) Conductor.

Double tension fitting suitable for ACCC HTLS (COPENHEGEN) Conductor.

Vibration Damper suitable for ACCC HTLS (COPENHEGEN) Conductor.

Performed Armour Rod suitable for ACCC HTLS (COPENHEGEN) Conductor.

Polymer Insulator string 70 KN for 132 KV

Polymer Insulator string 120 KN for 132 KV

Circuit Plate (Set of two)

Phase Plate set of Red,Blue and Yellow for tension tower

Danger Plate

Number Plate

Mid span Joint suitable for ACCC HTLS (COPENHEGEN) Conductor.

Repair sleeve suitable for ACCC HTLS (COPENHEGEN) Conductor.

Anti Climbing Device

Jumper Cone suitable for ACCC HTLS (COPENHEGEN) Conductor.

FOR ACSR PANTHER CONDUCTOR.

Double Suspension Fitting suitable for ACSR PANTHER Conductor.

Double tension fitting suitable for ACSR PANTHER Conductor.

Vibration Damper suitable for ACSR PANTHER Conductor.

Polymer Insulator string 120 KN for 132 KV

Polymer Insulator string 70 KN for 132 KV

Phase Plate set of Red,Blue and Yellow for tension tower

Mid span Joint suitable for ACSR PANTHER Conductor.

Repair sleeve suitable for ACSR PANTHER Conductor.

Performed Armour rod for ACSR PANTHER

Jumper Cone suitable for ACSR Panther Conductor.

FOR Earthwire 7/3.25mm G.S /OPGW

48 fiber OPGW fiber optic cable.

Supply of hardware set for 48 fiber OPGW

Junction Box (48 Fiber )

ERECTION.

WORK PORTION

Check Survey & Final Peg Marking (Route Length)

Cost of excavation of 132 KV NBDB +9 mtr.Type Tower foundation pits including all earth work back filling, watering and leveling. NBDB +9 = 02 No.@ 194.90 CUM =389.80 CUM

Setting of Stubs including all foundation work but excluding cost of concreting and excavation (Rate per location) for 132 KV NBDB +9 Type Tower. NBDB +9 = 02 Nos.

Cost of concreting M:20 for all types of foundation including cost of cement, coarse sand, stone grid, dewatering shorting and shuttering, formaing curing etc. But excluding cost of reinforcement bars. NBDB +9 = 02 Nos.@ 19.12 CUM (FS)

Cost of concreting M:10 for all types of foundation including cost of cement, coarse sand, stone grid, dewatering, shorting and shuttering, forming, curing etc. NBDB +9 = 02 Nos.@ 2.78 CUM (FS)

Installation of steel re-inforcement bars in RCC foundation including cost of cutting, welding, binding and placing them in foundation pit. NBDB +9 = 02 Nos.@ 1.121 MT

Erection of Super Structure of 132 KV NBDB +9 Type Tower (TRANSRAIL LIGHTING LTD Design) and their extension including all works above ground level and fitting of danger, number and phase plate bird gurad.

Laying, stringing, tensioning, clamping, jointing etc. of all 03 phases of ACCC HTLS (COPENHEGEN) Conductor. (for HTLS Replacement) including hoisting of insulators, fitting of all necessary hardware & accessories i.e fittings, Performed Armour rods, vibration dampers etc. along with all related works upto re-energization of line.

Laying, stringing, tensioning clamping, jointing etc. of all 03 phases of ACSR PANTHER conductor including hoisting of insulators, fitting of all necessary hardware & accessories i.e fittings, Performed Armour rods, vibration dampers etc. along with all related works upto re-energization of line.

Laying, Stringing, Tensioning, Clamping, Jointing, including fitting of all necessary hardware and accessories of OPGW & OFAC termination at S/S end to end connectivity and testing etc. on 132 KV Line.

Splicing & Installtion of Joint Box (48 Fibre)

Pipe Type Earthing of newly Towers.

Tack welding of all the bolts up to the height of one section or 5 Mtrs. From ground level whichever is higher with three tacks of 10 mm/12 mm2 eletrodes and applicable of 2 inc rich point on the effected surface including cost of materials(8/-per bolt)

Providing barricade for avoiding any accident during the period of excavation to back filling of soil

Carriage of materials from sub-station/storage place to site of work as per site requirement with all cost of men, T&P, vehicle etc required for work.

DISMANTLING WORK

Dismantling of all 3 phases of existing ACCC HTLS Conductor, all hardware fittings & conductor accessories e.g. Performed armour rod, vibration dampers, insulator strings etc. of existing line and re-rolling of dismantled conductor on empty drums for re-use, safely transportation of all removed material to UPPTCL stores.

Dismantling of all 3 phases of existing ACSR Wolf Conductor ,all hardware fitting& conductor accessories e.g. Performed Armour rod, vibration damper,insulator string etc.of exsiting line and re-rolling of dismantled conductor on empty drum for re-use,safely transportation of all removed material to UPPTCL stores.

Destringing of 48 fiber OPGW cable along with hardware fittings, joint box and etc proper Re-rolling on empty drum of OPGW & safely transportation of all removed materials to UPPTCL stores etc

Dismantling of existing 132 KV D/C Towers after cutting/opening of nuts, bolts section by section after cutting of tack welding bolts etc, as per direction of Supervision Engineer with all cost of men, T&P required for work. (Along with Stacking)

Dismantaling of earlier foudation which includes Excavation, Breaking of foundation up to 2 Mtr. depth and removing of concrete, Cutting, removing of stub and steel reinforcement, Backfilling, levelling and making field suitablefor agriculture.

Carriage of dismantaled materials from site of work to sub-station/storage place as per site requirement with all cost of men, T&P, vehicle etc required for work.{(approx weight = 3 MT (Tower Weight = 3 MT, Conductor Weight = 3 MT & other Acessories.)}

ASHUTOSH ENTERPRISES (BID ID -5522772)

Jagad Electrical & Fabricators (BID ID -5525156)

SHIVAM ENTERPRISES (BID ID -5525507)