Loading
Loading…
Loading…
Tender Value
₹49.3 L
EMD Value
₹98,600
Closing Date
7 Apr 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
SIGNAL
47 conditions · 3 needing a document upload
Whether the Standard format of the certificate submitted as per Annexure-V & V(A)
Whether the Requirement of Registration submitted as per ANNEXURE-6.
Whether the Certificate of familiarization submitted as per ANNEXURE-5.
Whether History sheet of tenderer(s) filled in as per Annexure-A1 of E-Tender document.
Whether details of Tools and Plants submitted as per Annexure- B1 of Annexed document.
Whether details of personnel to be engaged in the work submitted as per Annexure-C1 of E-Tender document.
Whether details of work completed during previous three financial years and current year submitted as per Annexure-D1of E-Tender document.
Whether details of works presently on hand submitted as per Annexure-E1 of E-Tender document.
Whether list of court cases submitted as per Annexure-F1of E- Tender document.
Whether list of arbitration cases submitted as per Annexure-G1 of E-Tender document
Whether broad plan of execution of work submitted as per Annexure-J1 of E-Tender document.
Whether details of other credentials/facilities not covered under Annexure-A1 to Annexure-J1 submitted as per Annexure-K1 of E- Tender document.
Partnership deed, if any Constitution of the firm and copies of connected legal documents should be submitted.
Joint Ventures firms cannot participate in this tender.
As per Rly.Bd s Letter No.2013/CE-I/CT/O/25/VOC dtd.05.08.2013 documents in support of financial capacity/capability to be submitted.
NOTE: The above check list is not exhaustive. The Tenderer must go through carefully the entire booklet and submit the tender complying with all the conditions/provisions/ instructions mentioned therein irrespective of the fact that they have been highlighted in the check list or not.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. (Non-submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer.)
Please submit the required information for evaluation of Bid Capacity as per Annexure-4 of the E-Tender document.
The tenderer(s) are required to upload the information as per Annexure-3 of E-Tender document duly signed by the tenderer(s) and verified by Chartered Accountant since the information is required to evaluate the bid capacity of the tenderers(s) for the tender valuing more than Rs. 20 crore. However, the tenderer(s) may submit any additional information, if any desire so. In case the tenderer(s) failed to submit the minimum required information as per Annexure-3 along with the offer or submit in any other format omitting required information essential to workout bid capacity, his/their offer shall be rejected summarily. This information is to be based on Annexure-4 of E- Tender document.
"Any bidder from a country which shares a land border with India will be eligible to bid in any procurement whether of goods, services (including consultancy services and non-consultancy service) or works (including turnkey projects) only if the bidder is registered with the Competent Authority." For details please refer to Railway Board's letter no.2020/CEI/CT/2/GCC/Correspondence Dt.11.08.2020. Any bidder from a country which shares a land border with India should submit ANNEXURE-6 and Registered Certificate from Competent Authority. For any bidder from India should submit only ANNEXURE-6.
The tenderer whether sole proprietor/a company or a partnership firm/registered society/registered trust/HUF/LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of Power of Attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed/Memorandum of Understanding/Article of Association/Board resolution, failing which tender shall be summarily rejected.
Please submit your bank details i.e. Name of Bank along with Bank Branch Code, Accounts Number as appearing in the cheque book, IFSC Code and PAN Number, duly certified by the authorised official of the bank, to facilitate payment through E C S / N E F T / RT G S . In lieu of the bank certificate photocopy/scanned copy of a cancelled cheque may be attached for verification of the above particulars.
Please give full details of the constitution of the Firm/JV/Company/Society etc and also submit relevant documents like Power of Attorney, Partnership Deed, Memorandum of Association, Article of Association, Bye Laws etc., by uploading and submitting originals in accordance with Annexure-A1 of the ETender Document. Non-submission of these documents shall render the offer liable to be rejected.
Please submit required details as required from Annexure A1 to G1, J1, V, V(A), B to C and 5 to 6 duly filled in and signed. Supportive documents/separate sheet are to be submitted, if required.
If working through contract labour, the Contractor must register with Labour Commissioner. Copy of Necessary license to the submitted with tender or to be produced before signing of Contract Agreement.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Signalling Zonal work each costing Rs.5, 00, 000/- or less in the section under jurisdiction of SSES/BALU of Khurda Road Division East Coast Railway for one year.
ST-OT-SIG-ZONAL-BALU-551
ST-OT-SIG-ZONAL-BALU-551
Open
Works - General
12 Months
Khordha, Odisha
₹0
₹98,600
7 Apr 2026
16 Mar 2026
24 Mar 2026
57 items across 1 schedule · ₹28,50,845.02 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Painting with Aluminium paint of approved brand and manufacturer to give an even shade one or more coats of Location Box (out side) including supply of Aluminimum paint. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Sqm | 4500.00 | 103.45 | 4,65,525 |
| 2 | Relettering (Each of 1cm. Height) with synthetic Enamel paint (one coat ) on location boxes or places advised by site engineer. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Each | 30000.00 | 0.98 | 29,400 |
| 3 | Painting one coat with ready mixed paint of approved quality on steel or wood work including supply of paint. Colour to be advised by site engineer. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Sqm | 100.00 | 30.38 | 3,038 |
| 4 | Painting & lettering of Signal post & Ladder including supply of Aluminmum, Black paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 193.00 | 98.98 | 19,103.14 |
| 5 | Painting & lettering of CLS Unit including supply of Aluminmum, Black paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 193.00 | 18.62 | 3,593.66 |
| 6 | Painting & lettering of EPD including supply of Black paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 15.00 | 6.86 | 102.9 |
| 7 | Painting & lettering of Point machine including supply of Black paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 93.00 | 28.42 | 2,643.06 |
| 8 | Painting of Point machine Ground connection including supply of Black paint, graphites & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Set | 93.00 | 12.74 | 1,184.82 |
| 9 | Painting & lettering of Lever in Lever frame including supply of Black,Grey, White, Brown, Red, Yellow paint & other necessary paints as per requirement. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 75.00 | 8.82 | 661.5 |
| 10 | Painting of LC Gate Boom & Stop Board including supply of Yellow, Black , Red paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 26.00 | 158.76 | 4,127.76 |
| 11 | Painting of Pedestal of LC Gate including supply of Black paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 26.00 | 83.3 | 2,165.8 |
| 12 | Painting of Winch of LC Gate including supply of Black paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 13.00 | 33.32 | 433.16 |
| 13 | Painting of Lock post of LC Gate including supply of Black paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 26.00 | 13.72 | 356.72 |
| 14 | Painting & grafiting o f running rods including s u p p l y of Red Oxide paint & Graphites. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Metre | 1500.00 | 1.96 | 2,940 |
| 15 | Painting of double line block instruments. This includes rubbing the surface of DLBI and suply of NC green paint and duco thinner. The painting should be double coated. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 20.00 | 64.68 | 1,293.6 |
| 16 | Painting of station master operation cum indication panel Up to 04 line. This includes rubbing the surface of panel and supply of NC silver grey paint and duco thinner. The painting should be doubled coated. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 2.00 | 257.74 | 515.48 |
| 17 | Painting of two coats of synthetic enamel paint over one coat of premier on the following after scarping & cleaning surface w h e r e v e r n e c e s s a r y w i t h contrac to r own s u p p l y o f paints. Complete Pa i n t i n g & Varnishing o f Independent Shunt Signal/ SPI Units with base complete & Guard Repeaters. Inspectio n o f p a i n t s h o u l d b e b y the representative of Sr.DSTE/KUR. | Numbers | 25.00 | 189.12 | 4,728 |
| 18 | Painting of ELB Boom & Stop Board including supply of Yellow, Black paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 14.00 | 293.97 | 4,115.58 |
| 19 | Painting of Pedestal/Operation Panel of ELB including supply of gray paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 21.00 | 258.72 | 5,433.12 |
| 20 | Painting of lock post of ELB including supply of gray paint & other necessary paints. Paint should be of make Asian, Berger, Nicholson or similar. Inspection of paint should be by the representative of Sr.DSTE/KUR. | Numbers | 14.00 | 103.48 | 1,448.72 |
| 21 | Alteration of wiring in existing Relay rack/ CT rack/composite relay rack. This includes supply of all types of wires, eyelets, nuts & bolts, bunching material, ferrules, ARA terminals, fuses & fuse blockes by the contractor at his own cost. Lettering & painting to be done by the contractor at his own cost. Wire (RDSO Approved Sources) to be inspected by the representative of Railway before use. | Numbers | 6.00 | 28,281 | 1,69,686 |
| 22 | Concreting (Mix 1:2:4) 200 mm x 200 mm on G.I. Pipes on bridges/ culverts or any other location as specified by the Rly. supervisor. All materials including cement required for the above works are to be supplied by the tenderer. | Metre | 50.00 | 339 | 16,950 |
| 23 | Transportation, installation, wiring, testing and commissioning of RKT on 20 mm pre- laminated, BWP, termite proof, borer proof plywood (or on a 12 mm Hylum sheet ISI Mark) of size 300 mm X 400 mm X 12 mm per RKT, including termination of cable/indoor wire, LED, push buttons etc. Railway will supply only RKT. Tenderer will supply all other required materials for the work. Inspection of Plywood/Hylum sheets by Representative of Sr.DSTE/KUR before use. | Numbers | 10.00 | 3,570 | 35,700 |
| 24 | Fixing of relay bases and wiring, bunching, fixing of relays, wiring in Old relay racks/location box and also carrying out any alteration in existing relay rack duly wiring and connecting New to old and Old to old relays by standard wires (RDSO Approved Sources) as per Circuit diagram. Fuses of bases, condensers, ND fuses, LED indicator & its wiring for relay rack. All materials required for this work will be supplied by the contractor from RDSO Approved Sources. Relays with accessories will be supplied by the Railway. | Per Relay | 50.00 | 783 | 39,150 |
| 25 | Supply & filling of Lubricant (Spec. SERVO transmission C4 SAE-30) in Point Machine. | Numbers | 93.00 | 137.28 | 12,767.04 |
| 26 | Strengthening of foundation of full/ half location boxes for tilting between 0 to 10 degrees, by carrying out the earth work around the foundation, ramming of the earth carrying out masonary work from bottom of earth work using country stones and cement masonary to prevent the earth from slipping down the bank. All the materials for masonary work to be supplied by the contractor. | Numbers | 12.00 | 4,094.11 | 49,129.32 |
| 27 | Manufacture, supply, transportation and fixing o f wooden box/MS box/Hylem board for terminating the power cable in Goomties, Relay room and any other places as instructed by site E n g i n e e r. I n s p e c t i o n b y the representative of Sr.DSTE/KUR. | Numbers | 2.00 | 1,788 | 3,576 |
| 28 | Transportation, installation of Track Lead Junction Box along with lead wires and cables for replacement/ lifting along with concreting to have anti theft arrangement as advised by Railway representative. All materials like TLJB, angles, lead wires, channel pins, ARA terminals as required shall be supplied by the Railways. | Numbers | 80.00 | 345.57 | 27,645.6 |
| 29 | Termination of insulated flexible wire from TLJB to Rail including making of two holes on rail, supply of insulated Flexible wire rope, steel galvanised 7x7 strand, channel pins, 25 sq mm eye lug & other necessary materials. | Numbers | 250.00 | 224.42 | 56,105 |
| 30 | Excavation of trenches of 1.0 Meter depth and width 0.3 Meter including clearing of roots and trees etc. for all types of soil. This work also includes covering of cables laid in trench and backfilling, ramming, consolidation o f soil as well as disposal of extra soil after cable is laid as specified in Guidelines on Signalling Cable laying given by RDSO and any latest circular i s s u e d by CSTE/ECoR/BBS. Note: Before refilling of the trenches, the cable laid are to be tested and recorded for its insulation value and after satisfaction of site Engineer the refilling process should start and after monsoon the route is to be attended for backfilling the rain cuts, wash out of soils where ever found. | Kilometre | 3.00 | 88,821 | 2,66,463 |
| 31 | Excavation of trenches of 0.8 Meter depth and width 0.3 Meter including clearing of roots and trees etc. for all types of soil. This work also includes covering of cables laid in trench and backfilling, ramming, consolidation o f soil as well as disposal of extra soil after cable is laid as specified in Guidelines on Signalling Cable laying given by RDSO and any latest circular i s s u e d by CSTE/ECoR/BBS. Note: Before refilling of the trenches, the cable laid are to be tested and recorded for its insulation value and after satisfaction of site Engineer the refilling process should start and after monsoon the route is to be attended for backfilling the rain cuts, wash out of soils where ever found. | Kilometre | 0.30 | 71,060 | 21,318 |
| 32 | Excavation of trenches including clearing of roots of trees etc., in rocky area up to a depth to be indicated by Railway Engineer at site as per the site condition [Minimum 0.6 meter] and width 0 . 3 M ts. a t t h e bottom. T h i s includes concreting & plastering as per the instructions of site Engineer and complete back filling by digging earth from a lead of 30 Mtr. In case 0.8 m e t e r d e p t h o r h i g h e r i s a c h i e v e d no concreting is required, otherwise concreting up t o 1 0 0 mm thickness should be done. All materials required for the above works shall be supplied by the Contractor. | Metre | 100.00 | 255 | 25,500 |
| 33 | Excavation of trenches in all kinds of soils including soft rocky area and clearing of track etc. to a depth of 1.0 M and width of 0.3 M for track crossing /pucca road/level crossing gate/platform/station circulating area or any other place as advised by site Engineer including transportation and laying of DWC/RCC/Split RCC/G.I. pipes with or without coupler. This includes repairing of track/pucca road/level crossing gate/ platform/station circulating area surface to original position by ramming and concreting wherever required soon after the work is over. DWC/RCC/GI pipes shall be supplied by the Railway. DWC pipes wherever required shall be supplied in 6 Mtr. length and shall be cut to size as per requirement. All other materials including cement are to be supplied by the contractor. | Metre | 120.00 | 335 | 40,200 |
| 34 | Laying of Signalling/4 Quad/ 6 Quad/ Power Cable/Telecom cables/ Jelly filled cables of all sizes in excavated trench, through GI/RCC/DWC pipes etc. wherever required. This includes transportation of cables from the stores to work site and transportation of empty cable drums with left over cables from site to the Railway stores. The length of cable laid includes the length of cable coil for termination purpose. NOTE: The cables are to be carefully handled during loading, un- loading and transportation to work site. Any damage found in the cable after final testing, in view of mishandling of cables, shall be made good by the Tenderer. Cable should be maggered before and after laying and recorded in a register and submitted to the site Engineer. | Kilometre | 5.00 | 24,389 | 1,21,945 |
| 35 | Transportation, excavation of pit, casting of foundation, plastering and erection of Steel Apparatus case (full size) with fixing of E-Type lock, wiring, cable entry, termination clamping, filling cable pit with sand, painting and lettering etc., as per Drg.No. S&T/CON/SK/16. This includes earth work and/or masonry work required for securing the apparatus case as per site condition. Railway will supply apparatus case with 'E' type lock only from Railway stores at. Tenderer will supply all wiring materials, PBT Terminals, fuses, fuse blocks, bus bars, hylum sheet ISI mark [6mm thickness], wood plank board of good quality [minimum 3/4" thick, Cement and transport all the materials to site of work at his own cost. The wiring materials such as wire coils, PBT terminals, fuses, fuse block, etc. should be used from RDSO approved sources. (1) Modification of inside arrangement of Apparatus cases if required for fixing of relays/transformers etc. shall be done by the contractor. Extra shelf, if any, shall be deposited to the Railway stores by the contractor. (2) All cables shall be terminated by providing copper eyelet of suitable size. Note:- (i) If location box foundation is available at site 20% of the cost is to be deducted. (ii) 40% payment shall be released after erection of location boxes. | Numbers | 7.00 | 19,438 | 1,36,066 |
| 36 | Transportation, excavation of pit, casting of foundation, plastering and erection of Steel Apparatus case (Half size) with fixing of E- Type lock, wiring, cable entry, termination clamping, filling cable pit with sand, painting and lettering etc., as per Drg. No. S&T/Con/BBS/92/90. This includes earth work and/or masonry work required for securing the apparatus case as per site condition. Railway will supply apparatus case with 'E' type lock only. Tenderer shall supply all wiring materials, PBT Terminals, fuses, fuse blocks, bus bars, hylum sheet ISI mark [6mm thickness], wood plank board of good quality [minimum 3/4" thick, cement and any other materials that are required for the work at his own cost. Contractor has to transport all the materials from store at his own cost to the work site. The wiring materials such as wire coils, PBT terminals, fuses, fuse block, etc. should be used from RDSO approved sources. (1) Modification of inside arrangement of Apparatus cases if required for fixing of relays/transformers etc. shall be done by the contractor. Extra shelf, if any, shall be deposited to the Railway stores by the contractor. (2) All cables shall be terminated by providing copper eyelet of suitable size. Note:- (i) If location box foundation is available at site 20% of the cost is to be deducted. (ii) 40% payment shall be released after erection of location boxes. | Numbers | 4.00 | 9,742 | 38,968 |
| 37 | Fabrication, Supply and fixing of CALLING ON instruction boards, STOP boards / BSLB/ Shunting Limit Board/Auto Section Board or any other board with engineering grade reflective sticker of size 600 x 1000 mm GI Sheet, with MS angle of 75 x 75 x 6 mm with 6 metre length including paint, excavation of pit and concrete foundation etc. as per the instructions of sight in-charge. All necessary materials to be arranged by the contractor. Inspection by Representative of Sr.DSTE/KUR. | Numbers | 37.00 | 8,826 | 3,26,562 |
| 38 | Cutting of masonary floor/walls at station building/ signal goomty/ Gate lodge at a depth of 0.5 mtr. to 1.0 mtr at places to be indicated by site Engineer for entering of cables inside the building. Only G.I pipes supplied by Railway and all materials as clamps, bolts & nuts as instructed by site Engineer supplied by tenderer. This includes repairing of masonary floors/walls after the cables are taken inside. Cement, Sand required for the work shall be supplied by the tenderer and also transportation of G.I Pipe from Store by the tenderer. | Numbers | 6.00 | 6,108 | 36,648 |
| 39 | Transportation o f s i g n a l p o s t s f o r multiple aspect colour light signals, complete with signal units, bases, ladders and other fittings, excavation o f pit, casting o f cement concrete f o u n d a t i o n , p l a s t e r i n g a s p e r D r g . No Con/SK/T/12, erection and fixing o f complete fittings o f the 2/3/4 aspect signal/signal posts including termination of cables, wiring, LED fixing, signal testing and focusing. Name plate & marker and all other materials shall be provided by the contractor at his own cost. Required cement s h a l l b e supplied b y the contractor. Arrangement o f Screening t o be provided b y the contractor i f required as instructed b y site Engineer. Contractor shall prepare jointly with Railway Engineer at site and submit Signal Sighting report and Signal test report as per approved format of Railway. NOTE: (i) 50 % Payment shall be released after erection of signal post. Balance 50 % shall be released after termination of cable, wiring, painting, testing & focusing of signal. (ii) If foundation is available at site 30% of the cost is to be deducted. | Numbers | 8.00 | 20,931 | 1,67,448 |
| 40 | Replacement of defective/damaged Boom in case of accident/wornout, material to be supplied by the Railway. This includes repairing of boom by welding as per instructions of site engineer. | Numbers | 6.00 | 3,082.12 | 18,492.72 |
| 41 | Replacement of defective/damaged pedestal along with drum and its wiring in case of accident/worn out, material to be supplied by the Railway. | Numbers | 4.00 | 1,866.9 | 7,467.6 |
| 42 | Replacement of defective/damaged Lock post with/without positive boom lock in case of accident/worn out, material to be supplied by the Railway. | Numbers | 4.00 | 722.26 | 2,889.04 |
| 43 | Replacement of defective/damaged winch along with 'E' type lock and its wiring in case of accident/worn out, material to be supplied by the Railway. | Numbers | 4.00 | 1,670.87 | 6,683.48 |
| 44 | Replacement of defective/damaged Wiring of LC gate. in case of accident/worn out, material to be supplied by the Railway. | Numbers | 6.00 | 1,062.16 | 6,372.96 |
| 45 | Transportation of Position Light Shunt Signal complete with post, units, bases and other fittings; excavation of pit, casting of concrete foundation (1 : 3 : 6) as per Drg. No. CON/SK/T/13, complete fittings of signal including termination of cables, wiring, focusing and testing. Railway will supply position light shunt signal with base from store. Tenderer shall supply all other materials required for the work. | Numbers | 5.00 | 4,873 | 24,365 |
| 46 | Supply, fitting & fixing of ply board 19 mm thick for cupboard, partition wall etc. Inspection by the representative of Sr.DSTE/KUR. | Sqm | 30.00 | 1,873.76 | 56,212.8 |
| 47 | Providing and fixing wooden planks in floors, shelves, lofts, etc with Kail, venteak, pillamarudhu or locally available comparable species of good country wood (to be listed by respective railways). 30 mm thick. | Sqm | 30.00 | 1,001.56 | 30,046.8 |
| 48 | Alteration of wiring in existing apparatus cases full/half. This includes supply of all materials in connection with alteration in wiring. All the materials shall be supplied by the contractor at his own cost. This includes entry of cables, sand filling and masonry work involved. Lettering and painting to be done by the contractor at his own cost. Railway shall supply only relays and relay bases. | Numbers | 5.00 | 3,583 | 17,915 |
| 49 | Transportation and fixing of Junction Type Route Indicator (1 t o 6 ) w a y complete/stencil Type/Multilamp t y p e route indicator o n the e r e c t e d s i g n a l p o s t i n c l u d i n g cable termination, wiring, painting, lettering, signal testing, and focusing, Tenderer shall supply name plate & marker and iron mesh (if required) at his own cost. | Numbers | 5.00 | 3,223 | 16,115 |
| 50 | Hiring of JCB machine (in good condition) for leveling and dressing ground/dismantling structures including disposal of debris through dumpers etc. with contractor's labour, JCB machine, machine operator, fuel etc. The contractor shall arrange road permit for vehicle for all the states of operation as per instruction of engineer-in-charge and vehicle shall not be more than three years old. payment shall be made for actual working hours at site. | Hour | 20.00 | 752.98 | 15,059.6 |
| 51 | Supply, Transportation and installation of all Siding Points with Arc Lever and fixing of Hand plunger lock with strercher bar for HP lock, point rodding solid 32 mm dia, trestles (in double wherever required), point adjusting screw, Clamps, cranks/rodding compensator, arc lever, adjustable crank, cement, A/B type foundation (in double wherever required) etc. as per standard practice of Railway. Excavation of pit, casting & foundation for cranks and compensator to be done by Contractor. All materials required will be supplied by Contractor (or) as per approved plan. Inspection by representative of Sr.DSTE/KUR. | Numbers | 1.00 | 1,74,724 | 1,74,724 |
| 52 | Excavation of pit at given location concreting foundation for cranks/Diversion wheel/'A' type/'B' type foundation Bases. All required materials such as cement, sand, granite stones and foundation bolts are to be arranged by the contractor. (i) Foundation of diversion wheel/ crank/ rod compensator: Excavation of pit of 1115 x 890 x 510 mm size, concreting foundation with cement concrete in the ratio of 1:3:6 with 40 mm graded stone and river sand, plastering the exposed portion including the sides up to the depth of 150 mm below the ground level and curing it for diversion wheel/crank/ rod compensator using 'A' type foundation bolts of 20x450 mm with or without M.S. plate and fixing the above equipment. 'A" type base foundation/ diversion wheel/ crank/ rod compensator will be supplied by Railways, all other materials such as cement, river sand, metal stone and foundation bolts are to be supplied by the contractor. | Numbers | 3.00 | 1,298.98 | 3,896.94 |
| 53 | C a s t i n g , transportation a n d p r o v i s i o n of Cement Earth Enclosure to Drg. No.CON/SK/T/9 and CON/SK/T/9A. Painting and writing work to be done after testing of earth value at site. All materials r e q u i r e d f o r t h i s w o r k w i l l be supplied by contractor. | Numbers | 40.00 | 630.14 | 25,205.6 |
| 54 | Replacement/ Provision of longitudinal/ transverse bond in the existing holes/ with drilling of new holes with 8 SWG wire and channel pins in track circuited area. The wires and channel pins shall be provided by the Railways. The rate includes, making holes on both side & fixing of bond wire. All material required for the same include drill machine and its power source have to be arranged by the contractor. | Numbers | 225.00 | 175.42 | 39,469.5 |
| 55 | Transportation, installation of point machine on MS plate fixed on wooden/psc/steel sleeper complete with fixing of anti-theft arrangement, 'D' Bracket, junction boxes, connection including smithy works involved for ground connection, including riveting/welding of angle cleats, termination of cables. Preliminary adjustment for operation of points by crank handle. Oiling, greasing, painting and lettering as required. This also includes supply and fixing telescopic arrangement using GI pipes of required dia for provision of wires from junction box to point machine. Railway will supply point machine, ground connection from stores. Tender shall supply all other materials required for the works. The contractor shall overhaul the point machine before installation. | Numbers | 4.00 | 19,671 | 78,684 |
| 56 | Wiring and testing of electric point machine as per the wiring diagram supplied by the Railway. This also includes the connection of complete ground connections of electric point machine and fixing of insulation materials and providing one numbers of seven lever [7 levers] Godrej locks with three keys each, per machine for outside cover, fixing arrangement of crank handle interlocking in point machine, and fixing of 'E' type lock [if required]. Railway will supply electric point machine, ground connections with insulations and junction boxes. Tenderer shall transport the materials issued by Railways to the site of work at his own cost and shall also supply materials such as PVC wire for wiring, one numbers of Godrej (7 Levers) locks with three keys each per lock, per point machine, and any other materials that are required for installation, wiring, testing and commissioning of the said work at his own cost. Also Preparation of point parameter history records and maintenance register duly recording the measurements in prescribed format jointly with Railway representative and handover all records to the Railway. | Numbers | 4.00 | 10,002 | 40,008 |
| 57 | Excavation of trenches including clearing of roots of trees etc. in rocky areas with chisel cutting up to a depth of 0.6 M and width of 0.3 M at the bottom. This includes concreting (1 : 1.5 : 3) at a height of 100 mm after laying of cables as per instruction of site Engineer and back filling of trench by digging. All materials including cement and chips of size 20 mm. etc. to be supplied by the contractor. | Metre | 200.00 | 713 | 1,42,600 |
| Schedule total | ₹28,50,845.02 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC2022..pdf
ATTACHMENT
LISTOFANNEXURES.pdf
ATTACHMENT
SPECIALCONDITIONSOFCONTRACT.pdf SPECIAL CONDITION OF CONTRACT
ATTACHMENT
TENDERFORMSTHIRDSHEET.pdf
ATTACHMENT
TENDERFORMSSECONDSHEET.pdf
ATTACHMENT
TENDERFORMSFIRSTSHEET.pdf
ATTACHMENT
SPECIALCONDITIONSOFCONTRACT.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .