Z.O.1.C.No.B2/0596/2026

Earthwork Excavation And Deposting on Bank With In...mall Size Boulders And Hard Gravelly Soil (SS 20A)

Providing Quarry Rubbish From Approved Quarry Incl...For Spreading. Watering Compacting Etc. Complete.

Providing and Laying Granular sub base (GSB) by provided close graded material confirming to ( table 400-1) mixing in a mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacted with vibratory power roller to achieve the desired dry density to the required grade and cross slope as per drawings all others incidental charges etc.complete as per clause of 401 Morth Specification using Grade III metals for Top layer

Providing and laying, spreading and compacting gra...es etc., complete as per clause 406 of MORTH Rev-5

Providing And Laying Plain Cement Concrete Grade M15 (Nominal Mix) Using 20mm And Down Graded Iss Hard Broken Granite Metal Including Cost And Conveyance of All Materials To Site Including Costs of Crushed Stone Sand (M Sand), Cement And Labour Charges For Laying Compacting And Pumping Charges Curing And All Other Incidental Chrages Etc Complete In Accordance With Is 456 - 2954 (If pumping of Concrete is required).

Cold Milling of Existing Asphalt Pavement to a Required Depth And The Milled Surface To Be Cleaned.

Conveyance Charges for milling materials to the work site to designated dumping yard

Providing and laying Tack Coat 2.5 kg/10 m2 with Bitumen Emulsion (Rapid Setting 1)(Procured from State/ Central Public sector undertakings only) including cost of bitumen emulsion at the site, including labour charges for preparing the surface and applying required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete over the primed surface as per clause 503 of MoRT& H Specifications Rev.5

Providing And Laying 50mm Consolidated Thick Bituminous Macadam Using 0.283 Cu.m of 25-10mm Metal 0.283 Cu.m of 10-5mm Metal 0.1415 Cu.m of 5mm And Below Size Irc Metal With 37 Kgs of Vg30 (60/70 Grade) Bitumen ( Procured from State/ Central Public sector undertakings only) For Premixing Per 10Sq.m Including Cost And Conveyance of All Materials to Work Site And Stacking Them On Road Side To Standard Departmental Metric Gauge For Pre-Measurement Heating The Bitumen In Bitumen Boiler Heating The Aggregates And Mixing Them With Bitumen In Mini Hot Mix Plant Spreading The Mix In The Required Temperature For Uniform Thick of 50mm Over A Previously Prepared Surface To Specified Grade And Cross Section And Consolidated By 8-10 Tonne Vibratory Roller To The Required Density Including Labour Charges Spreading Etc. Including Hire Charges For Machineries And All Other Tools Including Fuel And All Other Incidental Charges Etc. Complete As Per Clause 504 of Morth Rev-5

Providing and laying Tack coat over the existing bituminous surface using 2.0 kgs of bitumen emulsion (Rapid Setting 1) ( Procured from State/ Central Public sector undertakings only) per 10 Sq.m area including cost of bitumen emulsion at the site, including labour charges for preparing the surface, and applying the required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete as per Clause 503 of MoRT&H Specifications Rev.5

Providing and laying Bituminous Concrete to 30 mm ...ation using CMP as per clause 507 of MORTH Rev-5

Please Enable Macros to View BoQ information