REPAIR MAINTENANCE OF BR NATURE FOR WATER SUPPLY INSTALLATIONS AND PERIODICAL SERVICES AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

Demolition Brick tiles or terracing tiles, double layer on roofs

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc

Dismantling timber scantling 40 Sqm cm and over in section,in any position

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced)

Taking down shutters of any description n exc 1 sq. m each

Taking down chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)

Taking down chowkhats or frames exc 1.5 sq. m each but with shutters (without taking off shutters from the frames)

M&L walling of random rubble, uncoursed built in CM 1:4 all as specified and directed by Engr-In-Charge.

M&L Pre-cast cement concrete block type C1 1:3:6 masonry (20mm graded aggregate)with solid blocks, exc. 10 cm in width and setting in mortar CM 1:4, complete all as specified and directed by Engr-In-Charge.

M&L Cement concrete Type D2 1:4:8(40mm graded aggregated)in foundations, filling and mass concrete all as per specified and directed by Engr-In-Charge.

Sand filling under floors or in foundation including watering & consolidation all as per specified and directed by Engr-In-Charge.

S&F Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade all as per specified and directed by Engr-In-Charge.

M&L 40mm thick Type B0 (1:2:4)Damp proof course to horizontal or vertical surfaces including necessary formwork

M&L 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring all as specified and directed by Engr-In-Charge.

M&L 40mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring

S&F 38mm Glass dividing strips, 3 mm thick

M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces with water proofing compound complete all as specified and directed by Engr-In-Charge. Note : Water proofing compound shall be measured and paid separately.

M&L Rendering 15mm thick in CM1:6 on fair faces of stone masonry or concrete surfaces other than fair surfaces.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10 mm thick and jointed in CM 1:4

M&L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete

S&F Pressed steel frames size of frame(105x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified

S&F Pressed steel frames size of frame(125x60mm)for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

M&L preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and 2 coat of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F 125mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-In-Charge.

S&F 150mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-In-Charge.

S&F 150mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed by Engr-In-Charge.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life

Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern,with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws@200mm centre to centre,including cutting the grill to proper opening size complete all as per specied and directed by Enge-In-Charge.

S&F aluminium anodised handle 125mm long cast type

S&F barrel tower bolt 100mm long aluminium anodised extruded section

S&F 100mm long aluminium alloy anodised hinges

S&f 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F 4.8mm Thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Dismantling 500 Ltr water tanks and removing to store

M & L for coloured glazed cermic tiles size 350x250x7mm/450x350x7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement/coloured cement to match the tiles. etc complete .

M&L Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and pigment complete with screed bed in CM(1:6) all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F double socketed 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal

S&F 110mm PVC (SWR) couplers

S&F110mm PVC (SWR) vent cowl

S&F 110mm PVC (SWR) 'P’ trap

S&F 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent

S&F in repair 15mm stop valve/angle cock chromium plated cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore.

S&F in repairs bib tap, 15mm bore, fancy type, brass chromium plated screwed down screwed for iron pipe or for brass ferrule complete.

S&F in repair vitreous China wash hand basin of size 550x450mm with CI bracket and comprising of the following :- (a) Waste fitting 32mm dia brass chromium plated with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed. (b) 20mm Pillar tap cast copper alloy with capstan head chromium plated, screwed down, high pressure with or without leltered hot or cold with long screwed shank and fly nut. (c) PVC waste pipe 32mm dia 600mm long. (d) PVC Connection 15mm size with PTMT nuts of length 450mm long.

S&F in repair vitreous china squatting pan "Orissa' pattern size 580x440 mm white with integral foot rest with cement concrete complete all as specified.

S&F fixing in repair 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of lever.

S&F in repair PVC connection 15mm size 450mm long with brass fly nuts and washers on both ends complete.

S&F in repair towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minumum weight 170 gms)

Taking down old membrane and Preparing surfaces by brushing with wire brushes for removing caked mud etc. swe?eping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

M&L 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate etc complete.

Suppy only bitumen primer for use in waterproofing and damp proofing treatments(0.40 Ltr per Sqm.(Density at 25 C lin range of .87-.89)kg/Ltr and viscocity of 72 to 160 CPS etc complete.

Priming surfaces and applying normal tratment (for moderate conditions) using glass fibre base bitumen felt grade 2

M&L for laying of APP based polymeric membren minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gm/sqm) laid on primed surface by torched application complete etc all as per manufacturer instructions.

M&L preparation of new membrane sufaces and apply two coat Aluminium paint on Surfaces of any description, over 10cm in width or girth,not otherwise described

Supplying only liquid Integral waterproofing compound etc comptete.

M&L 5mm thick rendering on fair faces of brick work or concrete surfaces on ceiling in CM(1:3).

M&L for Prepration of new plastered surface and applying two coat of white wash on ceiling

M&L for Prepration of new plastered surface of wall and applying two coat of distemper oil-emulsion.

M&L for Prepration of new plastered surface of wall and applying two coat of white wash.

M&L preparation of old plastered surfaces and applying one coats of cement base paint on walls all as specified and directed by Engr-In-Charge.

M&L preparation of old plastered surfaces and applying one coats of white wash on ceiling all as specified and directed by Engr-In-Charge.

M&L preparation of old plastered surfaces and applying two coats of colour washing all as specified and directed by Engr-In-Charge.

Mirror polishing on marble /granite/ Kota stone work where ever required to give high gloss finish complete

Taking up or down 15mm steel tubing and connections etc complete .

Taking up or down 20mm steel tubing and connections etc complete .

S&F 15/16 mm outer diameter dia CPVC pipe SDR 11 & plain CPVC SDR 11 fitting in walls/ceiling fitting complete.

S&F 20mm outer diameter dia CPVC pipe SDR 11 & plain CPVC SDR 11 fitting in walls/ceiling fitting complete.

S&Fixed in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe,PTMT urinal spreader,Vitreous China squating urinal plate and waste pipe

Demolition and breaking up 200mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

M&L 200 mm dia Sail-glazed stoneware drain pipes laid in trenches and jointed as specified

M&L 200mm dia pipe Concrete bed to drain pipes including forming cradles; in cement concrete 1:4:8 Type D-2

M/S TANUSHREE CONSTRUCTION COMPANY