ELECTRICAL WORK

Amount

Labour and Errection Charges:-

Work for Removing of all Cable Connection including 11 KV Incoming & Outgoing Feeder, Control Cable etc.

Work for Dismantling and shifting of 11 KV Panel, 33 KV Control Panel.

The work for Eexcavation of new Plinth size (4X15 Mtr) for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water, As per RESPO Norms.

Work for shifting of panel at newly consutructed plinth, works includes proper alignment of panel, tightening grouting of panels etc. As per RESPO Norms.

Work for proper laying and termination of 11 KV Incoming and outgoing cables, Control Cables with proper lugs, ferules etc.

Earthing of above panels including cost of materials (M.S. Flat 50*6mm), As per RESPO Norms.

Providing and fixing/Installation of heavy duty exhaust fan for ventilation of control Room.

3/11 KV SUB STATION KATGHAR, UNDER EDD DALMAU:-

Complete overhauling of 36 KV. VCB Installed on 331/11 KV, 5MVA T/F, 33 KV Dalmau Tehsil Feeder including removing of old grease from all movable parts of mechanism, Removing of their charging gear after opening mechanism and reassembling of the same, after machining work. Set right all the mechanism and their setting to insure proper pole operation and spring charging . Do properly greasing of VCB and measure the contact resistance of VCB. Also done the all related work to complete the job satisfactory.

Providing and fixing/Installation of Digital Ampere Meter

Dismantling of all movable parts of 11 KV VCB and opening of all defective parts such as Mechanism tripping lever assembly, closinng lever assembly, auxiliary contact, Cleaning of all operatring moving parts with petrol and sand paper and again Re-assembling of all parts, Check the performance of 11 KV VCB, Contact Resistance etc.

Providing and fixing of tripping lever assembly , closing lever assembly, phase separator trolley raising and lowering gear interrupter, Providing of hanging assembly.

Complete repairing and Over hauling of ON/OFF Mechanism and Repairing/ Replacement of all defective parts adustment ON/OFF on Reqrired load and insuring for smooth and easy ON/OFF Operation of VCB .

Dismantling of all parts of 11 KV Panel such as spout Contact, bus bar and its cleaning by petrol, Replacement of damage spout contact providing CT Side and main bus bar insulation of bus bar with best qualioty of HT Tape/Empire tape with providing ON/OFF Indication with new wiring for protection of Pannel synthetic enameled smoke grey paint with Labour charges.

Providing and fixing of 11 KV VCB Complete Charging Gear Mechanism as per standard and existing VCB make.

Providing and fixing of VI for suitable of 11 KV VCB.

Making of 50 Mtr 200 mm with Trench for Laying of Control Cable.

Making of Trunch Cover with angle, Steel bar as per technical specification and standard as per RESPO Norms.

3/11 KV SUB STATION DALMAU, UNDER EDD DALMAU:-

Complete overhauling of 36 KV. VCB Installed on 33 KV, Katghar Feeder including removing of old grease from all movable parts of mechanism, Removing of their charging gear after opening mechanism and reassembling of the same, after machining work. Set right all the mechanism and their setting to insure proper pole operation and spring charging . Do properly greasing of VCB and measure the contact resistance of VCB. Also done the all related work to complete the job satisfactory.

Providing and fixing/Installation of Digital Ampere Meter

Dismantling of all movable parts of 11 KV VCB and opening of all defective parts such as Mechanism tripping lever assembly, closinng lever assembly, auxiliary contact, Cleaning of all operatring moving parts with petrol and sand paper and again Re-assembling of all parts, Check the performance of 11 KV VCB, Contact Resistance etc.

Providing and fixing of tripping lever assembly , closing lever assembly, phase separator trolley raising and lowering gear interrupter, Providing of hanging assembly.

Complete repairing and Over hauling of ON/OFF Mechanism and Repairing/ Replacement of all defective parts adustment ON/OFF on Reqrired load and insuring for smooth and easy ON/OFF Operation of VCB .

Dismantling of all parts of 11 KV Panel such as spout Contact, bus bar and its cleaning by petrol, Replacement of damage spout contact providing CT Side and main bus bar insulation of bus bar with best qualioty of HT Tape/Empire tape with providing ON/OFF Indication with new wiring for protection of Pannel synthetic enameled smoke grey paint with Labour charges.

3/11 KV SUB STATION DALMAU TEHSIL, UNDER EDD DALMAU :-

Complete overhauling of 36 KV. VCB Installed on 33/11 KV, 10 MVA T/F including removing of old grease from all movable parts of mechanism, Removing of their charging gear after opening mechanism and Re-assembling of the same, after machining work. Set right all the mechanism and their setting to insure proper pole operation and spring charging . Do properly greasing of VCB and measure the contact resistance of VCB. Also done the all related work to complete the job satisfactory.

Providing and fixing/Installation of Digital Ampere Meter

Dismantling of all movable parts of 11 KV VCB and opening of all defective parts such as Mechanism tripping lever assembly, closinng lever assembly, auxiliary contact, Cleaning of all operatring moving parts with petrol and sand paper and again Re-assembling of all parts, Check the performance of 11 KV VCB, Contact Resistance etc.

Providing and fixing of tripping lever assembly , closing lever assembly, phase separator trolley raising and lowering gear interrupter, Providing of hanging assembly.

Complete repairing and Over hauling of ON/OFF Mechanism and Repairing/ Replacement of all defective parts adustment ON/OFF on Reqrired load and insuring for smooth and easy ON/OFF Operation of VCB .

Dismantling of all parts of 11 KV Panel such as spout Contact, bus bar and its cleaning by petrol, Replacement of damage spout contact providing CT Side and main bus bar insulation of bus bar with best qualioty of HT Tape/Empire tape with providing ON/OFF Indication with new wiring for protection of Pannel synthetic enameled smoke grey paint with Labour charges.

Providing and fixing of VI for suitable of 11 KV VCB.

M/S Shiv Traders

NATIONAL ENTERPRISES