SPL REPAIRS TO BLDG NO TW33 STB23 251 TRANSIT CAMP STB11 E13 304 FD WKSP AND MT PARKING ALLIED WOKS, INTERNAL ELECTRIFICATION, PROVN OF COVER SHED, MT FENCING, CHAIN LINK FENCING AND TILLING IN TOILET BLOCK WITH INTERNAL ELECTRIFICATION WORKS AT A

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed

Supply and fix, 0.63 mm thick corrugated galvanised mild steel sheeting (minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type or J type or cranked hooks , bolts and washer in roof, complete, all as specified and directed.

Supply and fix plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80mm thickness (minimum 275gm/sqm galvanising) complete all as specified and directed.

Material and labour for preparing new galvanised surfaces to receive painting by coating with mordent solution including washing and cleaning and applying two coats of anticorrosive roof paint over a coat of red oxide primer over 10 cm width or girth on steel surface .

Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth not other wise described and applying one coat of synthetic enamel paint with primer complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed.

Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm each including iron mongeries complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S& F for 35 mm thick Plain, framed, panelled shutters with 2nd class hardwood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 2nd class HW 35mm thick Glazed and skeleton shutters, divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified and directed.

S&F 2nd class HW 30mm thick Glazed and skeleton shutters, divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified and directed.

Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed.

Supply and fix MS butt hinges medium weight, cold rolled 75mm size complete all as specified and directed.

Supply & fix Aluminium anodised barrel tower bolt 100 mm long of extruded section etc complete all as specified and directed.

Supply & fix Aluminium anodised barrel tower bolt 125 mm long of extruded section etc complete all as specified and directed.

Supply & fix Aluminium anodised barrel tower bolt 150 mm long of extruded section etc complete all as specified and directed.

Supply & fix Extruded Aluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed.

Supply & fix Extruded Aluminium anodised alloy handles fabricated type 100mm long complete all as specified and directed.

Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed.

M&L Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

Supply only Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staple

Supply only sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortarbedding (but not backing ), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:4 for laying floor tiles etc all as specified.

M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tileexceeding 0.18 sqm but notexceeding 0.38 sqm, infloors etc. set and jointed inneat cement slurry andointed in white or coloured cement to match. (Note: colour & pattern will be decided by GE/ Engr-in-Charge. Contracter will bought the tile only after approval of colour & pattern of tile by GE/Engr-in-charge).

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with 10mm thick rendering CM 1:4 as backing coat for vertical tiles on walls .(Note: colour and pattern of tile will be decided by GE/ Engr-in-charge. Contractor will brought the tiles only after approval of colour and pattern by GE/Engr-in-charge)

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floor with all completed all as specified

Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed.

Dismantling Timber scantling 40 sq cm and over in section , in any position all as specified and directed.

S&F Non asbestos fibre cement building boards fixed or laid/ insertedtoimber/GI/Aluminium framework with screws designer type as in false ceilling with & including aluminium snap grid of size and fixed with Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified with allconnected accessories, fitting& fixtures completed all as specified & directed

Supply and fixed 6 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to wall surface etc complete all as specified and directed.

Supply and fixed 6 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceilling surface etc complete all as specified and directed.

Material & labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area exc. 3 sqcm and n.exc 6 sqcm, complete all as specified and directed

M& L for cleansawn Second class hard-wood scantlings with framed work with all complete all as specified and directed

Material and labour for preparation of surfaces of wood and wood based materials new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

Material and labour for preparation of new plywood and wood based material surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L Cement concrete type C2 1:3:6 (40 mm graded aggreded )in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars,boundary pillars and posts (including caps and bases)

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etccomplete all as specified and directed.

M&L for Cement concrete type B2 1:2:4 ( 40 mm graded aggregate ) in surface channels and drains complete all as specified and directed.

M&L for 25 mm thick Sub base Cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) in sub-base, floors and pavings etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) Completed all as specified.

M&L for Nominal mix RCC type B-1, 1:2:4 using (20 mm graded stone aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams;basement slabs, under-reamed piles bases etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete with completed all as specified .

Material and labour for providing cement concrete 1:3:6 type C2 75 mm thick (using 20mm graded aggregate ) for plinth protection/path etc Completed all as specified.

M&L for Rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surfaces Completed all as specified.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:4 complete.

M&L for 3 coat of white wash on newly plastered surfaces on plith wall completed all as specified .

Surface excavation n.exc 30 cm deep & averaging 15 cm deep and getting out in hard/dense soil.

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

Removal of surplus soil of distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed..

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surface of concrete all as specified.

M&L Formwork to fair finished surface sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified.

M&L Formwork to fair finished surface sides of pillars, posts, struts, piers, columns and stanchions all as specified.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaceusing broken stone or boulders.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed.

M&L for preparation of newly steel surface of any description, over 10cm in width or girth, not otherwise described with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel Surfaces of any description, n.exc10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coat of syntjetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for mild steel work as in wind ties for roof covering including securing bolts 290 Gde E-165 etc complete all as specified.

M&L for Pre-cast cement concrete block masonry type C-1, 1:3:6 (20 mm graded agg) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

S&F Mild steel posts and struts in fencing size 70mmx70mmx6mm including cutting tops to shape as swan neck as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square 10mm dia nut,exc 5cm but n exc 10cm long complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. directed (each line wire to be measured)

Supply only Chain link MS galvanisd fencing mesh size of 100mmX100mm with 5mm dia galvanised wire.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F mild steel Tie bars 10mm dia with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290 Gde-165 complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment Fe-290 Gde E-165 complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 550x400mm including 32mm PTMT waste coupling, brackets and waste pipe incl cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick coloured tiles (Square/Rectangular) area of each tile exceeding 0.06 sqm but notexceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry andointed in white or coloured cement to match. (Note: colour & pattern will be decided by GE/ Engr-in-Charge. Contracter will bought the tile only after approval of colour & pattern of tile by GE/Engr-in-charge).

M&L for Non - skid Ceramic tiles 7 to 8 mm thick coloured tiles (Square/Rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry andointed in white or coloured cement to match. (Note: colour & pattern will be decided by GE/ Engr-in-Charge. Contracter will bought the tile only after approval of colour & pattern of tile by GE/Engr-in-charge).

M&L for 40 mm thick Sub base Cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in sub-base, floors and pavings etc omplete all as specified and directed by EIC.

M&L for Nominal mix RCC type B-1, 1:2:4 using (20 mm graded stone aggregate) for columns, pillars, piers, post and stuts etc complete all as specified and directed.

Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLS), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping/ PVC pipes of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLS)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 1 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size complete all as specified and directed.

All as per item No. 1 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.

All as per item No. 2 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.

S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.

S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska

Supply and fixing LED light fitting 1 x 22 Watt 220 volt AC decorative ultra slim polycarbonate LED lighting fixtures with high luminen output, enviournmental friendly, energy effecient connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.Make- Havells/Crompton/Syska

S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.Make- Havells/Crompton/Syska

Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 4 way single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

S&F MCB SPN having braking capacity 10KA, 20 Amps, 240 V complete all as specified and directed.

S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.(Make :- Bajaj /Havells/Philips)

S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 2.5 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pi along with 2.5 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 2.5 sqmm earth wire and 2 Run of 2.5 sqmm cable shall be measured as one run.)

S&F 1100 volt grade heavy duty cable PVC insulated aluminum conductor served with inner sheathed of PVC tape and overall sheathed in service connections , one twin core cable flat or circular multistranded 10 sqmm 2 core complete all as specified and as directed. . Make :- Havells/KEI/Polycab

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

M&L of SPN type rewireable switch fuse unit of 230 Volt 50 Hz single phase double pole of capacity 32 Amp including MS box with backelite fuse & fuse carrier fittings , operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fitting duly grouted/fixed in solid block wall or on wooden board as directed including taking down the existing all as specified and directed. Make : INDOASIAN / L&T/Havells

Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)

Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.

Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.