Rate Contract for carrying out Restoration, Maintenance and HT-LT Network improvement Works for the year 2022-23 in respect of ESD Zainakote, ED-3rd (Stage Contract)

Amount

Supply, Installation, Testing and Commissioning of S.T. poles well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5m. Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

11 Mtr ST Pole ST-410 SP56

9 Mtr ST Pole ST-410, SP-33

8 Mtr ST Pole ST-410, SP-15

Installation, Testing and Commissioning (including loading, unloading and transportation from Divisional store to different sites (including Manual Carriage upto 100 Mtr at site)-Material to be provided Depatmentally) of S.T. poles well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5m.Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

11 Mtr ST Pole ST-410 SP56

9 Mtr ST Pole ST-410, SP-33

8 Mtr ST Pole ST-410, SP-15

Supply, Installation, Testing and Commissioning of PCC Poles

9 Mtr. Long Pole-PCC WL-300Kg

8 Mtr. Long Pole-PCC WL-200Kg

Installation, Testing and Commissioning (including loading, unloading and transportation from Divisional store to different sites (including Manual Carriage upto 100 Mtr at site)-Material to be provided Depatmentally) of PCC Poles

9 Mtr. Long Pole-PCC WL-300Kg

8 Mtr. Long Pole-PCC WL-200Kg

Manual Carriage Charges for Steel Tabular Pole 11Mtr/9mtr/8 mtr for every additional 50 mtr (including unloading/Loading)

Manual Carriage Charges for PCC 9mtr/8 mtr for every additional 50 mtr (including unloading/Loading)

Supply, Installation, Testing and Commissioning of ACSR conforming with the Indian Standard specification IS: 398 (PLI)-1976 and IS : 398 (PL II)- 1976 or the latest version thereof.

30 Sqmm ACSR

50 Sqmm ACSR

100 Sqmm ACSR

Installation, Testing and Commissioning (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Depatmentally)of ACSR conforming with the Indian Standard specification IS: 398 (PLI)-1976 and IS : 398 (PL II)- 1976 or the latest version thereof.

30 Sqmm ACSR

50 Sqmm ACSR

100 Sqmm ACSR

Re- Straightening of loose Conductor/Fallen Conductor after opening of bindings and refixing thereof.

Re- Straightening of Tilted PCC/ST Poles by way opening pit and refilling after striaghtening

Supply, Installation, Testing and Commissioning of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (300x 300 x 8 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete (11 kV)

Supply, fabrication and fixing (including loading, unloading and transportation of Channel Iron X-arm/V cross Arm 100x50x50x6 mm,75x40x6mm (Galvanized as per IS) incluging Top Bracket, Clamps & Braces , (Galvanized as per IS)

Supply and fixing (including loading, unloading and transportation) of Nuts and Bolts full thread of sizes Galvanized as per IS

Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of 11KV Pin Insulators with Pins (5KN)

Providing & fixing of GI Wire 6 SWG & 8 SWG

Installation, Testing and Commissioning (including loading, unloading and transportation from Store to site) of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Installation, Testing and Commissioning (including loading, unloading and transportation from Store to site) of 11KV Pin Insulators with Pins (5KN)

Providing and laying of earthing of earthing complete by GI Pipe 40 mm or GI rod 20 mm 2.5 mtr long through GI Strip

Providing and laying of Earthing of Substation---Excavation of earth pit of dia 650mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. GI strip for neutral earthing of size 25mm*3mm for connection of transformer body, G.O Set & lightening Arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials & earth chamber made of brick masonry with RCC slab cover.

Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of Danger Plate With Clamps as per Standards.

Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of GI Barbed Wire for Anti Climbing

Supply and Painting of ST poles with one coat of Red Oxide primer and two coats of Aluminum paint.

Providing of material and laying of Cement bottoming of poles

1:2:4 Mix as per REC Standards 0.6 M3 per Pole

1:2:4 Mix as per REC Standards 0.5 M3 per Pole

1:2:4 Mix as per REC Standards 0.45 M3 per Pole

Providing of material and laying of Stone pad (300x300x75 mm)

Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of 16 KN Polymer Shackle Insulator alongwith G.I. U-Clamps/pole collar for Shackle insulators

Supply, Installation, Testing and Commissioning of Parallel Groved (PG) Clamps for ACSR Conductor of sizes

Supply, Laying, Installation, Testing and Commissioning of Single Core Cable,1.1kV Grade, Armoured, XLPE Insulated Stranded Conductor FRLS type including Lugs/Thimbles/Clamps

Laying, Installation, Testing and Commissioning of Single Core Cable,1.1kV Grade, Armoured, XLPE Insulated Stranded Conductor FRLS type (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Depatmentally)

Supply, Installation, testing and commissioning of HT Air Bundled Cable on ST/PCC Poles including Lugs/Thimbles/Clamps

35 mm² AB (HT) Cable (3x35+1x70 mm²) XLPE(11 kV, 3C+Earth)

50 mm² AB (HT) Cable (3x50 + 1x70 mm²) XLPE(11 kV, 3C+Earth)

70 mm² AB (HT) Cable (3 x 70 + 95 mm²) XLPE(11 kV, 3C + Earth)

120 mm² AB (HT) Cable (3x120 + 1x95 mm²) XLPE(11 kV, 3C + Earth)

Installation, testing and commissioning of HT Air Bundled Cable on ST/PCC Poles (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Depatmentally)

35 mm² AB (HT) Cable (3x35+1x70 mm²) XLPE(11 kV, 3C+Earth)

50 mm² AB (HT) Cable (3x50 + 1x70 mm²) XLPE(11 kV, 3C+Earth)

70 mm² AB (HT) Cable (3 x 70 + 95 mm²) XLPE(11 kV, 3C + Earth)

120 mm² AB (HT) Cable (3x120 + 1x95 mm²) XLPE(11 kV, 3C + Earth)

Supply, Installation, testing and commissioning of LT Air Bundled Cable on ST/PCC Poles including Lugs/Thimbles/Clamps

50 mm² AB (LT) Cable ( 3 x 50 + 1 x 16 + 1 x 35 mm²) XLPE (1.1kV, 3+1 C, Al)

70 mm² AB (LT) Cable ( 3 x 70 + 1 x 16 + 1 x 50 mm²) XLPE (1.1kV, 3+1 C, Al)

120 mm² AB (LT) Cable ( 3 x 120 + 1 x 16 + 1 x 70 mm²) XLPE (1.1kV, 3+1 C, Al)

Installation, testing and commissioning of LT Air Bundled Cable on ST/PCC Poles (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Depatmentally)

50 mm² AB (LT) Cable ( 3 x 50 + 1 x 16 + 1 x 35 mm²) XLPE (1.1kV, 3+1 C, Al)

70 mm² AB (LT) Cable ( 3 x 70 + 1 x 16 + 1 x 50 mm²) XLPE (1.1kV, 3+1 C, Al)

120 mm² AB (LT) Cable ( 3 x 120 + 1 x 16 + 1 x 70 mm²) XLPE (1.1kV, 3+1 C, Al)

Providing and fixing of Aluminum Lugs/Clamps/Thimbles of sizes

Fixing of Aluminum Lugs/Clamps/Thimbles of sizes

Installation, Testing and Commissioning (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Depatmentally) of Distribution Transformer

LT Distribution Box with MCCB for incomer & Switch Fuse Units for Outgoing Circuits which includes Design, manufacture, testing at works and supply of Distribution Boxes made out of CRCA MS for controlling the L.T. feeders from the L.T. side of Distribution Transformersof LT Distribution Box with TPN MCCB for incomer & SFU's for outgoing Circuits. (As per the Specifications Enclosed).

Supply, Installation, fabrication, Testing and Commissioning Draw-out type Air Circuit breaker including Mild Steel CRCA Panel Enclosure and panel Pedestel, 4 pole, 1000A, Conforms to IS/ IEC 60947-2 & 3, Microprocessor based ET trip systems with thermal memory, Fully rated neutral with inbuilt protection- Overload, Short-circuit, Instantaneous & Earth-fault protections, including CT for protection and measuring, Short circuit breaking capacity 50kA @ 440V AC and shall comply to IP-66 protection including Earthing of panel. (Strictly as per the Specification Document enclosed)

Supply, installation, commissioning and Testing of Fuse set for

Supply, fabrication and installation of Transformer Pad/G.I Channel Bedding including GI Pipe/Channels/Braces/ Clamps/Collars of sizes for Substations including frame for LA, GO etc

25 KVA- (250 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

63 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

100 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

200 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

250 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

400 KVA- (450 Kg of GI includes Channels/Braces/GI Pipes including Clamps /Collars)

630 KVA- (450 Kg of GI includes Channels/Braces/GI Pipes of sizes including Clamps /Collars)

1 MVA - (450 Kg of GI includes Channels/Braces/GI Pipes of sizes including Clamps /Collars)

Supply, Installation, Testing and Commissioning of 11 KV Horn, Gap (fuse 3-phase 200A) as per Relevant IS

Installation, Testing and Commissioning of 11 KV Horn, Gap (fuse 3-phase 200A) as per Relevant IS (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Supply,Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 KV, 10 KA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 KV, 10 KA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V) (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Supply, Installation, Testing and Commissioning of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V)

Installation, Testing and Commissioning of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V) (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Supply, Installation, testing and commissioning of Suspension/Tension Clamp with eye hook

Supply, Installation, testing and commissioning of HT Straight Through Cable Jointing Kit

Supply, Installation, testing and commissioning of HT Heat Shrinkable Outdoor Cable Termination Kit

Supply, Installation, testing and commissioning of LT Heat Shrinkable Outdoor Cable Termination Kit

Supply, Installation, testing and commissioning of LT Straight Through Cable Jointing Kit

Installation, testing and commissioning of HT Straight Through Cable Jointing Kit (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Depatmentally)

Installation, testing and commissioning of LT Straight Through Cable Jointing Kit (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Depatmentally)

Dismantling and Re-erection of Distribution Transformer (including loading, unloading and transportation from one site to different site)

Dismantling of Damaged DT from Site and transportation, Loading and Unloading (Which includes arrangement of crane/sleepers/Trucks etc) to Divisional Workshop and after repairs back to site and re-installation of same

Dismantling of damaged ST Poles alongwith allied Materials and transportation of same to divisional store including loading and unloading

11 Mtr ST Pole

08 Mtr ST Pole

09 Mtr ST Pole

Dismantling of existing tilted ST Poles alongwith allied Materials and Re-erection of same within the radius of 50 Mtrs of initial site

11 Mtr ST Pole

08 Mtr ST Pole

09 Mtr ST Pole

Dismantling of Existing PCC poles(Sub-Standard) along with Fixtures with carriage (Mechanical/Mannual), Loading at Site and Unloading/Stacking in Divisional Stores. AEE Concerned to make proper Red indent for the same, as per actual Quantity Dismentled.

8 Mtr PCC Pole

9 Mtr PCC Pole

Dismantling of Existing 9/8 Meter Wooden poles (Sub-Standard) along with Fixtures with carriage (Mechanical/Mannual), Loading at Site and Unloading/Stacking in Divisional Stores. AEE Concerned to make proper Red indent for the same, as per actual Quantity Dismantled.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

All kinds of soil

Ordinary Rock

Providing of Stone Soling (Supplying, Laying, spreading and compacting stone aggregate of 90 mm to 45 mm

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work

Engaging labour for carrying out pruning/ branch cutting of trees

Unskilled

Semi-Skilled

Skilled

Installation, Testing & Commissioning (including Transportation, loading and unloading from Divisional store to different sites) of Single Phase Energy Meter including Clamps/Collar (Energy Meter to be provided Departmentally)

Supply, installation, testing and commissioning of 16 mm² Cable (2C) from LT Line to meter ,1.1k V Grade, Armoured, PVC Insulated Stranded Conductor FRLS type including Aluminum Lugs/thimbles of sizes

Supply, installation, testing and commissioning of 10 mm² Cable (2C) from LT Line to meter ,1.1k V Grade, Armoured, PVC Insulated Stranded Conductor FRLS type including Aluminum Lugs/thimbles of sizes

Supply and fixing of Polypropylene weather proof outdoor type Meter Box for Single Phase Meter along with Zinc plated clamps

Carriage/Transportion of Material by Mechanical means including loading and unloading from Divisional Stores to Different Sites or From one location to another by hiring the vehicle

M/S ABDUL GANI WAGAY