Repair and Restoration of Water supplies of Minor urgent nature of work under various water supply schemes Ambaran, Sunail Jayanti

Amount

Earth work excavation by manual means over areas ( exceeding 30cm and upto 1.5mtr in width as well as 10sqm on plan) incl. disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled & neatly dressed in : All kinds of soil

Earth work excavation by mechanical means (Hydraulic excavator) over areas ( exceeding 30cm and upto 1.5mtr in width as well as 10sqm on plan) incl. disposal of excavated earth lead upto 50mtr and lift upto 1.50m, disposed earth to be levelled and neatly dressed: All kinds of soil

Filling of available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50metres lead:

a) Water bound macadam road

b) Bituminous road

Dismantling GI pipes (external work) incl. excavation and refilling trenches after taking out pipes manually/ by mechanical means incl. stacking of pipes within 50 metres Lead.

a) 15mm to 40 mm nominal bore

b) Above 40mm nominal bore

Deployment of extra fitters/ mazdoor for restoration of damaged GI pipes, locating/ traces of blockages/ leakages etc.

a) Fitter

b) Mazdoor

Laying & Fitting of GI pipes complete excluding cost of pipes and earth work.

Fixing/ replacement of CI Sluice valves complete with bolts, nuts, rubber insertions etc. (Sluice Valves to be supplied by the department)

Fixing/ replacement of GM Gate valves/ Non Return Valves complete (Gate Valves/ Non Return Valves to be supplied by the department) including bends, collars, unions & other allied items

Making connection of GI distribution branch with GI Main of following sizes by providing & fixing Tee, including cutting & threading the pipe etc complete

25 to 40mm nominal bore

50 to 80mm nominal bore

Fabrication / welding by Gas plant including transportation of Gas belding plant at site complete job

Welding by electric welding plant at site complete

Dismentalling of Cement Concrete

a. Richer mix

b. Leaner mix

Dismentalling of RCC Work

Dismentling of Tile work in floors and roof laid in cement motors including stacking material within 50mtr lead

for thickness of tiles 10mm to 25mm

for thickness of tiles above 25mm and upto 40mm

whitewashing with lime to give and even shade old work (two or more codes)

Painting with synthetic enamel paint of approved and manufactured of required colour to give an even shade two or more codes on old works

Providing / laying of 1:2:4 Plain Cement Concrete upto Plinth Level

Providing / laying of 1:3:6 Plain Cement Concrete upto Plinth Level

RCC work in 1:2:4 Cement concrete

Steel work including cost of steel

Providing and fixing of 1mm thick MS sheet door with 40x40x6mm size door frame

12mm thick plaster 1:4

Repair of rods of Slucie valves and gate valves by way of rethreading, making of nut of different dia

150mm dia

100mm dia

80mm dia

65mm dia

50mm dia

40mm dia

Finishing wall with waterproofing cement paint of required shade old work (one or more codes applied @ 2.20KG per 102m over priming coat of primer applied @ 0.80ltr per 102mtr complete including cost of priming coat

Hire Charges of Generator 250KVA include cost of service of operating staff and supply of lubricating oil

Note :- (1) If any item/ items not advertised in the above rate list but found necessary to be executed at site. The same shall be paid as per SSR 2012 on Contractors Appreciation / Depreciation.

Note :- (2) Any item either not advertised or nor provided in SSR 2012 shall be paid as per actual lowest market rates.

Note :- (3) Any other dia of pipes/ pipe specials if required shall be issued by the department as per prevailing stock rates of the division.

RAKESH SARAF