Upgradation Civil work for compliance of fire safety norms as per National Building Code 2016 at Delhi State Cancer Institute (East ) Dilshad Garden Delhi(2nd Call)

Amount

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 1.)Of sectional area 40 square centimetres and above

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade 8mm thick (mirror polished and machine cut edge)

Granite stone of any colour and shade

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Hot finished welded type tubes

Supply and installation of fully insulated wooden fire door of 120min. fire rating, of maximum 52mm thickness, comprising of 75mm x 44mm hardwood internal timber frame work, with infill insulation of 20mm thick of of 48 kg/m3, wool insulation, coated with viper intumuscent coating on both sides for insulation. The coated insulation shall be sandwiched between min 12mm thick Non Combustible (Calcium Silicate) Boards on both sides (edge to edge on internal Hardwood frame) and cladded with 3mm Thick Commercial Ply & 1mm Thick Laminate (Any Regular Plain Shade In Suede Finish) on both faces, with 52mm x 10mm exposed hard wood lipping all round the shutter the main door frame will be made out of Hard Wood (Red Mirandi) of section 120 x 70mm and coated with viper Fire retardent Primer. The rebate shall be of 20mm x 55 mm in Door Frame to accommodate the shutter in frame. The frame shall be fitted with fire & smoke intumescent seal of size 20 x 4mm on frame & shutter . The pasting of the ply / laminate should be done using automatic machine and should be free from any nails or perforations. The manufacturer should be compliant to ISO 9001: 2008 and CE certified, manufacturer should be covered under IGBC scheme. Approved manufacturer Navair International Ltd or Hormann or equivalent as approved by Engineer -In-Charge and should be ISO Certified company. The board shall be Resistant to vermin, mould growth, minor impact, abrasion and short term water attack and shall be Off –white in colour with a smooth surface suitable to receive most forms ofdecoration having following technical characters i.e.; The Construction design similar to NWD12050 and similar to the design tested as per BS 476 part 22 and IS 3614 Part II, at CBRI, India. The shutter can be provided with appropriate openings for view panel glass. Prototype Test certificate for fire rating of doors from CBRI, Roorkee for earlier tested design shall be attached along with manufacturers test certificate. as per approved architectural drawings and complete as per the directions of Engineer-In-charge. Note: Above quoted prices for rate per door are inclusive of the following: 1. Single rebated Hard Wood (Red Mirandi) frame of section 120x70mm finished with fire retardant. primer. The frame is fitted with fire seal of size 20*4 mm (intrumscent seal) 2. 52mm thick wooden shutter faced with 3mm thick Commercial ply & 1mm thick Laminate (Any, Regular Plain Shade In Suede Finish) on both face. The shutter is fitted with fire seal of size 20*4 mm (intrumscent seal)

Providing and fixing of 11 mm thick Saint Gobain Make contra flame doorlite glass of Saint Gobain make -01 NO Per leaf ( in case of Double leaf door -02 glasses as per approved architectural drawings and complete as per the directions of Engineer-In-charge.

Providing and fixing of Triple Point locking Panic bar with external trim of Hafele make or equivalent -01 no for Double leaf door (both door shutters) only. All complete as per directions of Engineer-in-Charge

Providing and fixing of SS ball bearing hinges of 100*75*3 mm -04 no per single leaf door/08 no per double leaf door of Hafele make or equivalent . The door hinges shall be suitable for door weights upto 120kgs. All complete as per directions of Engineer-in-Charge.

Providing & fixing pull handle of back to back with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised beveling on the outer surface. Length =150mm,19mm dia, of steel grade -SS304 including all fittings and fixtures. All complete as per directions of Engineer-in-Charge.

Providing and fixing of Door closer for fire door weight 50 kg or more of Hafele make or equivalent -01 no per single leaf door/02 no per double leaf door

Providing & fixing floor stopper of half dome of 45mm dia with fixing accessories, in satin stainless steel in SS 304,including all fittings and fixtures. All complete as per directions of Engineer -in-Charge.

Providing and fixing of Dead Lock with both side key operation of Hafele make -01 no per door. All complete as per directions of Engineer -in-Charge

Providing and fixing of face mounted Tower Bolt of Doorset make-300 mm long - 01 no per double Door only.All complete as per directions of Engineer -in-Charge.

Providing and fixing of Anchor fasteners of Fischer make -11 No per door , fastener size should be 10*120 mm. All complete as per directions of Engineer -in-Charge.

Providing and fixing of required sizes and shapes mandatory signage (fire safety signage , escape route signage, floor signage etc). Photo luminescent maintenance ftree self glowing wall mounted , single side, signs comprising zinc sulphide chargeable crystals which glows in digital printed on photo luminicent vinyl and having protective lamination over it using base of 3 mm thickness acrylic sheet . The colour combination and size of letters shall be as per direction of Engineer-in-charge.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement ,including patch fitting as required and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing double action hydraulic floor spring of Dorma, Hardwyn, Godrez brand confirming to IS:6315 having brand logo embossed on the body/cover with double spring mechanism and door weight upto 100 kgs, for doors including cost of cutting floors, embedding in floors and required making good the same matching to the existing floor finishing and cover plates with brass piviot and single piece ms sheet ouer box, with 1.25 mm SS cover plate all complete as per direction of Engineer-in-charge.

Providing and fixing SS door handles D type Size 18 " in toughened glass door, complete as per direction of Engineer-in-charge.

Providing Sand blasting etching of 25 micron on glass as per approved design on item no.15

Suraksha Associates

vinay shanker