Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹18.7 LAccepted-AOC 216 UGF RAM VIHAR ANAND VIHAR DELHI 110092 | SHAHDARA | DELHI | 110092 | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹23.7 L+₹2.8 L (13.6%)Rejected-AOC | L-2 | Rejected-AOC L-2 | |
| 3 | L-3₹23.9 L+₹3.0 L (14.3%)Rejected-AOC | L-3 | Rejected-AOC L-3 | |
| 4 | L-4₹24.4 L+₹3.5 L (16.7%)Rejected-AOC | L-4 | Rejected-AOC L-4 | |
| 5 | L-5₹24.6 L+₹3.7 L (17.6%)Rejected-AOC | L-5 | Rejected-AOC L-5 |
Tender Value
Refer Docs
EMD Value
₹75,100
Closing Date
7 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I RND DELHI
MILITARY ENGINEER SERVICE, GARRISON ENGINEER (I) RND, LUCKNOW ROAD, TIMARPUR, DELHI-110054
MAINTENANCE OF B/R NATURE WORK TO E/M INSTALLATION AND PETTY REPAIR WORK TO VARIOUS LABS AT KWC AND METCALFE HOUSE AREA UNDER GE (I) RnD DELHI
2022_MES_559582_1
GE/RND-68/DLI/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Delhi
Class-D, Cat a(i)
2 documents required · 2 mandatory
₹500
GE I RND DELHI
₹75,100
Yes
31 Dec 2022
22 Oct 2022
9 Dec 2022
22 Oct 2022
7 Dec 2022
25 Nov 2022
Amount
Dismantling structural steel work including doors, gates etc complete all as specified and directed.
S&F mild steel work in tubular trusses for pillar/post/rafter/purlin or frame work for ACP board with special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed.
M&L for preparation of new steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc including dimantling old galvalume sheets complete all as specified and directed.
S&F polycarbonate Fibre glass reinforced translucent corrugated sheeting with three layer and side lap fixed with coach screw and washer in roof, wall including fixing on G+5 top roof etc including dismantling old sheets complete all as specified and directed.
S&F Rolling shutters 1.25mm thick laths , without ball bearing, as specified including top cover, an anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or manual type including taking out old unserviceable rolling shutter complete all as specified and directed.
S&F Safety lever locks of mild steel with 4 levers for rolling shutter complete all as specified and directed.
S&F ball bearing for rolling shutter complete all as specified and directed.
S&F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including taking out old unserviceable collapsible steel gates complete all as specified and directed.
M&L for treating the soil along the external perimeter of building at the rate of 2.25 Ltrs of anti termite emulsion per meter of the perimeter wall complete all as specified and directed.
S&F in repair Stainless steel (Grade 304) hollow tubes sections, channels, plates, sheets, angles etc of any size and sections in railings, balusters,post, newel posts running rails, middle rails, chain etc including necessary welding, riveting, bolting, grinding, buffing, polishing and making curvature (wherever required) etc complete all as specified and directed.
M&L for painting road hinting/lines with hot applied thermo plastic compound paint confirming to MORTH specification, painting as per manufactures specification / directions, mechanically applied to form 1.5mm thick film on road limit including cleaning and drying the existing dust oil, grease and moisture free surface before applying paint complete all as specified and directed.
Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing)removing rubbish off the premises complete all as specified and directed.
M&L for fully vitrified tiles 10 mm thick, in light shade, double charge (Square/rectangular) polished, area of each tile exceeding 0.36 Sqm and n.exc. 0.81 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match the shade of coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
All as per item ser No 14.00 above but size 600x600mm.
M&L for fully vitrified tiles 10 mm thick, in light shade, double charge (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M&L for non skid coloured ceramic tiles 400mm X 400mm X 7mm/300X300X7 thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 15mm thick cement screeding in CM 1:6 complete all as specified and directed.
M&L for glazed ceramic tiles 300x200x7/300X450X7mm thick coloured tiles in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for vitrified ceramic tiles on vertical surfaces/dado 10 mm thick, in light shade, polished, in dado/skirting etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid including over 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed.
S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width complete all as specified and directed.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete all as specified and directed.
M&L for repairs to leaking in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern etc of any description by changing the washer, etc complete all as specified and directed.
S&F in repairs PVC connection 15mm bore, 45cm long with 2 Nos PTMT checknuts with washer complete all as specified and directed.
S&F in repairs chromium plated brass shower rose 125mm dia with swivel joint complete all as specified and directed.
S&F in repair 15 mm dia PVC bib tap standard of PTMT of any colour, minimum weight-90gms high pressure screwed for iron pipe complete all as specified and directed.
S&F in repairs 15mm dia bib tap fancy type cast copper alloy chromium plated long body complete all as specified and directed.
S&F in repairs 15 mm bib tap brass chromium plated complete all as specified and directed.
S&F in repair 15mm dia brass chromium plated pillar tap fancy type with fly nut capstan head screwed complete all as specified and directed.
S&F in repairs 15 mm dia brass chromium plate stop valve with long shank (concealed type) screwed down high pressure complete all as specified and directed.
S&F in repairs 15 mm dia brass chromium plated angle valve complete all as specified and directed.
S&F in repairs 15 mm dia brass chromium plated angle valve double ways complete all as specified and directed.
S&F in repairs 15mm dia ball valve high pressure with aluminum rod and polyplast ball complete all as specified and directed.
All as per item Ser No 32.00 above but 20mm dia.
S&F in repairs 32 mm dia waste fittings brass chromium plated complete all as specified and directed.
All as per item Ser No 34.00 above but 40mm dia.
S&F in repairs small fittings galvanised iron medium grade such as sockets, elbow , nipple, tee, union etc for 15mm bore pipe (ISI Mark) complete all as specified and directed.
All as per item Ser No 36.00 above but for 20mm bore pipe.
S&F in repairs 32mm dia PVC waste pipe for WHB/Urinal, 60cm long with union complete all as specified and directed.
All as per item Ser No 38.00 above but 40mm dia.
S&F in repairs 10 ltrs capacity PVC low level flushing cistern with syphon handled level PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.
S&F in repairs flush pipe PVC for low level flushing cistern including jointing to WC complete all as specified and directed.
S&F in repairs 25mm dia ball valve high pressure with aluminum rod and polyplast ball complete all as specified and directed.
S&F in repairs brass chromium plated jet spray with stainless steel tube 1m long for single syphon EWC complete all as specified and directed.
S&F in repair vitreous china wash hand basin flat back white of size 550 x 400 mm excluding CI/MS brackets complete all as specified and directed.
S&F in repairs brass chroumium plated bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as specified and directed.
S&F in repairs brass chroumium plated grating 125 mm dia round fix on floor / nahani trap fixed with white cement complete all as specified and directed.
S&F in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed.
S&F in repairs vitreous china Squatting pan Orissa pattern of size 580X440 mm white with integral foot rest water closet including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white including fixing bolts, jointing to flushing cistern and flush pipe/antisyphonage pipe etc complete all as specified and directed
S&F in repair 9mm thick plywood, grade BWR type BB fixed with screws to timber frame complete all as specified and directed.
S&F in repair vertical venetian blind consisting of aluminium head rail, vanes/louvers 4” wide of approved tint and traverse cord fixed in position complete all as specified and directed.
Easing of door/windows shutters(without taking off)of not exceeding 1 Sqm each panel for easy closing/opening tightning of hinges or changing the position of hinges adjustments of tower bolts, Sliding bolts and making good the distrubed surface etc complete all as specified and directed.
All as per item Ser No 52.00 above but exceeding 1 Sqm and not exceeding 2 Sqm.
S&F in repairs 300 mm long aluminum alloy anodised sliding door bolt, (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.
S&F in repairs aluminium sheeting 0.56 mm thick fixed to wooden shutters with chromium plated brass screws including cutting to required size etc complete all as specified and directed.
S&F in repairs floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with over all length of cover plate 140mm complete all as specified and directed.
M&L for securing glass of any description in existing steel frame with oil based putty including removing of old putty complete all as specified and directed.
S&F in repairs 20mm dia brass chromium plated tubular towel rail of size 60 cm long including brackets complete all as specified and directed.
S&F in repairs extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.
S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs 100 mm long aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws etc complete all as specified and directed.
S&F in repairs 100 mm size steel window handles, Including welding if required for fixing to windows complete all as specified and directed.
S&F in repair 100 mm hinges MS Butt hinges medium weight cold rolled complete all as specified and directed.
All as per item Ser No 63.00 above but size 75 mm.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortor 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. Note:- Shade of Granite shall be approved by GE.
M&L for machine cut kota stone slab flooring 20-25mm thick jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and granite/mirror polishing laid over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) etc complete all as specified and directed.
M&L for 75mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.
M&L for prepolished coloured Chequered cement concrete tiles 30 cmx30 cmx25 mm thick jointed and pointed in grey cement & pigment to match the shade of tiles laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
S&F In repair 15 mm dia GI steel tubing "medium grade" galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair GI steel tubing "medium grade" galvanised 20mm dia with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F rotational moulded polyethelene water storage tank (Cylindrical vertical with closed top) triple layered hoisted and fixed in position 500 ltrs capacity including disonnecting and refixing the GI pipe and fittings including dismantling old unserviceable PVC water tank complete all as specified and directed.
All as per Item Ser No 73.00 above but 1000 ltrs capacity of tank.
Disconnecting existing tanks, setting aside (or lowering if equired ) for cleaning,etc.and hoisting if required reconnecting and refixing in position after cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to 500 ltrs capacity of tanks complete all as specified and directed.
All as per Item Ser No 75.00 above but exc 500 ltrs and not exc 1000 ltrs.
Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.
M&L for brick work with sub-class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.
All as per item Ser No 78.00 but except bricks.
Taking down cement plaster/ grit plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L rendering 15 mm thick plaster in CM 1:6 on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed.
All as per item Ser No 81.00 above but in CM 1:4.
M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over and including 2mm thick wall care putty (each coat minimum 1mm thick) complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of base coat primer complete all as specified and directed.
M&l for complete removal of the exisiting treatment and applying two coats of distemper oil emulsion over and including 2mm thick wall care putty (each coat minimum 1mm thick) complete all as specified and directed.
M&L for complete removal of the exisiting treatment on wall surfaces and applying two coats of acrylic exterior emulsion paint over and including 2mm thick acrylic wall care putty (each coat minimum 1mm thick) complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty in metal/wooden frames etc complete all as specified and directed.
M&L welding in repairs (thickness of metal to be welded n exc 06 mm) in any situation and on any floor complete all as specified and directed.
Complete removal of existing roof treatment in up to depth of roof slab and removing entire rubbish off the premises, and applying Water proofing treatmnet as under:- (a) Rendering 10mm thick in CM(1:4) mixed with water proofing compound @3% by weight of cement. (b) Applying a coat of approved bituminious primer @0.25 ltr/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/[email protected]/Sqm. (d) Supplying and laying polymeric water proofing membrane of weight not less than 3Kg/Sqm (e) Applying a coats of solar reflective bituminious aluminium paint @0.15 kg/sqm over the memberane complete all as specified and directed. Note: WPC shall be measured and paid seperately.
M&L for chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubing down concrete surfaces with wire brushes cleaning with water allowing to dry and applying a layer of Zinc rich epoxy primer as an antirust on all exposed reinforcement followed by a layer of bounding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2 mm dia of wire and apperture 75 mm,total thickness of guniting not exc 40 mm (Avg thickness) in Cement mortar 1:2 using OPC 53 grade cement mixed with polycreate mixture @2% by weight of cement or as per manufactuer's instructions and finally applying cement plaster over guniting surface of required thickness to give even uniform and smooth finishes confirming to proper geometrics in cement mortar 1:3 to match the existing surfaces as in sides ,soffits of the slabs,chajja,fins,facia ,parapets,lintels,columns and beams etc complete including necessary scafolding, shuttering , chasing to brick work or RCC members at any hieght up to 06 storied buildings including removal of all small trees/shurbs/plants etc complete all as specified and directed.
M&L for Expanded metal cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing wih galvanised steel staples complete to wood or steel members complete all as specified and directed.
Supply only intergral water proofing compound complete all as specified and directed.
S&F in repair sensor kit with battery for sensor type urinal pot of size 75x50mm for proper functioning complete all as specified and directed.
PARIDHI CONSTRUCTION
m/s Kailash Chander
DP COMPLEX
SRK CONSTRUCTION
V.V CONSTRUCTIONS
Sree Ram Enterprises
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .