NIT52 AWC REPARING

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor.(A) Shutter with 25mm thick planks, 19mm thick battens.

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:-a) With 0.5 mm thick sheet

Aluminium sheet ridging fitted with self tapping screws,EPDM washers etc complete.(Minimum 225mm end lapping)(A) 300 mm lapping each way

Applying decorative cement based paint including cleaning and smothening surface throughly iii) Two Coats Wall

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat to timber or plastered or steel surface, with ready mixed primer of approved quality, including smoothening surface bu sand papering etc.b) On Steel or other metal surface

Painting with best quality synthetic paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On timber or plastered surface :

Painting with best quality synthetic paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.b) On Steel or other metal surface with super gloss (hi-gloss)

BaLA (Building as Learning Aid) Child friendly educational and Child friendly paintings on walls, floors, ceilings etc…

Display Board

LABOUR WELFATE CESS

Please Enable Macros to View BoQ information