ADDITION / ALTERATION OF MAIN SCHOOL BUILDING OF KV INS CHILKA

Amount

M&L for 10mm thick cement screed or bedding layer in cement mortar 1:4 on concrete or bricks surface finished even and smooth without using extra cement to receive roof/sunken treatment, mixed with water proofing liquid compound @ 200 ml/50 Kg by weight of cement over and including a neat cement slurry @ 3 Kg/Sqm over cleaned roof surface, Water proofing roof treatment consists of a five layered Atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including priming the surface with a coat of hot blown bitumen of grade 85/25 @ 1.2 kg/Sqm each at top and bottom of the membrane as bonding material, and a coat of bituminous aluminium primer @ 100 gm/Sqm on top, including sealing all joints by thermo fusion polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing all as per manufacturer's instructions and including taking down of existing treatment, complete all as specified and directed. Note - Water proofing liquid compound shall be measured and paid separately.

Supply only water proofing liquid compound.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes including dismantling of floor, hearth or wall tiles with bedding coat and debris off from the site complete all as specified and directed.

M&L for 20 mm thick (table rubbed polish) Granite stone in steps, jambs, pillars, window cills, cooking platform, office counter set over 15 mm thick screed in CM (1:4) complete all as specified and as directedetc. including pointing in white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite including dismantling stone slabs and tiles laid bedded and pointed of any mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L 75mm thick PCC type C2 1:3:6 (40mm grade aggregate) as in plinth protection including demolition of cement concrete (unreinforced) in any description and in any position not other wise provided for and removing the debris to a distance not exc 50m from site complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x30cm x 25mm thick, set, over and including 15mm screed bed 1:4 CM and jointed and pointed in neat cement slurry in floors with grey cement and pigment to the match of tile including dismantling stone slabs and tiles laid bedded and pointed of any mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L for RCC type B1 (1:2:4) using 20 mm grade aggregate in chajjas including demolition of RCC of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for Mild steel TMT bar 10mm Dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for column hooking end and binding with and incl mild stel wire(annealed) not less than 0.9mm Dia or securing with clip complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors and including taking down eaves gutters and rainwater pipes (any size of pattern) including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F in repairs 0.56mm thick plain aluminium sheeting Alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the places can be cut) complete all as specified and directed.

M&L for Forming 20mm thick Expansion joints filled in 150mm thick concrete slab with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A’ complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames) all as specified.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and as directed.

S&F factory made 2nd class hard wood, 35 mm thickness of plain, framed, panelled shutters (two panels), with with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedto chowkats complete all as specified and as directed.

S&F Powder coated of any colour aluminum frame (minimum thickness of powdere coating 50 micron) for door/windows/ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated of any colour aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coating aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. complete all as specified complete all as specified

S&F powder coated aluminium sliding window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium anodised fittings including locking arrangement and all accessories commplete all as specified and as directed. (Note : glass and wire mesh shall be measured seperatly.)

S&F 4.8 mm thickness of sheet glass, ordinary quality and glazing fixed in aluminium frame in square n exc 0.5 sq. m in each pane all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed

S&F Aluminium powder coated (thickness of powder coating not less than 50 micron) with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed.

S&F stainless steel butt hinges of 100mm size, complete all as specified and as directed.

S&F extruded aluminium alloy handles, 150mm long fabricated type, anodised all as specified and as directed.

S&F 300 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed.

S&F 140 mm anodised aluminium alloy door stopper with double toungue and rubber shoe fixed on door shutter complete all as specified and as directed.

S&F 300mm MS, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L for rendering 10mm thick on brick or concrete sufaces in CM 1:6, including finishing even and smooth without using extra cement including taking down cement plaster on brick or stone walls etc including racking out joints, backing for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete sufaces in CM 1:4, including finishing even and smooth without using extra cement including taking down cement plaster on brick or stone walls etc including racking out joints, backing for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 5mm thick on ceiling surfaces in CM 1:3 including finishing even & smooth without using extra cement including taking down cement plaster on brick or stone walls etc including racking out joints, backing for key scrubbing down with water etc complete all as specified and directed.

M&L for preparation of newly plastered surface of wall by vacum based sanding machine and applying one coat of Alkali Resistance Primer and applying two coats of weather coat exterior emulsion primer (100% Acrylic weather coat anti dust) of approved shade by auto roller including preparation of surface complete as per specified and directed by manufacturer's instructions.

M&L for preparation of newly plastered or unplastered surfaces of walls and Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coat white wash complete all as specified and directed.

M&L for preparation of newly painted wooden surfaces of any description not otherwise described over 10 cm width or girth of any description and applying two coat of synthetic enamel paint over one coat of pink primer of approved shade complete all as specified and directed.

M&L for preparation of old plastered decorated surfaces of external wall by brooming down or steel wire bruching, scraping down smoke soot, moulds, moss and efflorescencent salts and trading oil and greasy spots of any description over 10 cm width/girth and including applying one coat of weather coat anti dust emulsion paint, exterior grade of approved shade as per manufacturer's instruction and also rewrite the bldg No as per existing font style and size with enamel paint of approved shade complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for complete removal existing treatment and preparation old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and greasy spots of wall and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil emulsion distemper of approved shade over a coat of alkali resistant priming paint on wall complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth of any and applying one coat of synthetic enamel paint of approved shade complete all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two coats complete all as specified and as directed.

M&L for providing, cement concrete type B1 1:2:4 (20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges including demolition of cement concrete (unreinforced) in any description and in any position complete all as specified and as directed.

S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to floor, walls and ceilings of size 50mm bore including taking down complete all as specified & directed.

S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to floor, walls and ceilings of size 25mm bore including taking down complete all as specified & directed.

S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to floor, walls and ceilings of size 15mm bore including taking down complete all as specified & directed.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 25 mm dia/bore complete all as specified & directed.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 50 mm dia/bore complete all as specified & directed.

M&L Machine cut kota stone slab flooring/skirting 20-25mm thick over 15mm thick CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing on Kota stone work to give high gloss finish including dismantling of floor, hearth or wall tiles with bedding coat and debris off from the site complete all as specified and directed.

M&L for acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors including screed bed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes complete.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F 32/40mm bore and 80 cm long PVC waste pipe for WHB, sink complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 2000 ltr capacity including provision of inlet, outlet overflow and wash out connections including dismantling Complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 5000 ltr capacity including provision of inlet, outlet overflow and wash out connections including dismantling Complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repair 15mm bore dia fancy type swan neck Pillar taps, cast copper alloy, with or without lettered Hot or cold with capstan heads, chromium plated, crewed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs angle valves of 15 mm dia chromium plated fancy type screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed.

S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to floor, walls and ceilings of size 20mm bore including taking down complete all as specified & directed.

S&F 2nd class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified & directed.

S&F in repairs CP Bib taps in 15 mm dia chromium plated cast copper alloy of fancy type screwed down for iron pipe complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed with necessary fittings for iron pipe size 25 mm dia/bore and fixed (Minimum weight 22mm-455 gms) complete all as specified and directed

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed with necessary fittings for iron pipe size 40 mm dia/bore and fixed (Minimum weight 40mm-690 gms) complete all as specified and directed

M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface including taking down complete all as directed and specified.

All as per item No. 65 above but one 3 pin socket outlet 5 Amps on same board including taking down complete all as directed and specified.

All as per item No. 65 above but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty including taking down complete all as directed and specified.

All as per item No.65 here in before but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductor and 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire including taking down complete all as directed and specified.

All as per here and before item No.65 above but for one light point controlled by one two way switch including taking down complete all as directed and specified.

M&L Sub main wiring using 4 runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 6.0 Sqmm and two run of 6.0 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : 4 runs of 6.0 Sqmm copper wire,2 run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit including taking down complete all as specified and directed.

M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 6.0 Sqmm and one run of 6.0 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : 2 runs of 6.0 Sqmm copper wire,1 run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit including taking down complete all as specified and directed.

M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 2.5 Sqmm and one run of 2.5 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified. Note : Two runs of 2.5 Sqmm copper wire,one run of 2.5 Sqmm wire & one run PVC Conduit shall be measured as one unit including taking down complete all as specified and directed.

M&L Sub main wiring using two runs of FR grade PVC insulated,unsheathed ,stranded, copper conductor cable of size 4.0 Sqmm and one run of 4.0 Sqmm FR grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : Two runs of 4.0 Sqmm copper wire,one run of 4.0 Sqmm wire & one run PVC Conduit shall be measured as one unit including taking down complete all as specified and directed.

S&F in replacement Switch piano, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge.

S&F Switch piano, flush type, two pole, two way 5 Amps, 240V complete all as directed by Engineer-in-Charge.

S&F Socket outlet 2 in 1, 5 pin, 5 Amps flush type 240 Volt .

S&F in replacement Switch socket combination 5/15 Amps flush type, 6 pin, 5 in 1.

S&F in replacement Ceiling rose,3 terminal PVC/poly carbonate isolated body.

S&F in replacement of Step type electronic Fan regulator socket type on the existing phonolic laminated sheet etc as required as existing type and size

Taking down defective ceiling fan from its position and refixing the same after repairs complete all as directed by Engr-in-Charge.

Supply and fixing High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. (Cat Part No:- CCS-100-20-65-HL2-DP-NWH (BRIGHT LINEA) of Crompton or equivalent )

Supply and fixing 1x10 watt (2 ft) LED Batten indoor decorative type robust and high performance giare free extruded Batten with milky white diffuser complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. ( Cat Part No:- CCS-103-10-65-SL-DP-NWH(TRIMLINE NEU) of Crompton or equivalent )

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louver connection with multistranded copper conducter flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolts, washers and groutin and making good to disturbed surface complete all as specified and directed.

Supply & fixing in replacement ASTRA NEO bldg security lights made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy ≥ 110LPWof capacity 30 watt.including provn of necessary connection including suitable bracket complete. (Cat Part No:- Crompton (ASTRA NEO), Cat No . LSTS-30-CDL-M or equivalent )

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

M & L Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

S & F in replacement of capacitor 230 Volts AC 50 HZ and rated capacity 2.5 MFD for ceiling fan.

S & F in replacement of ball bearing of any size and type suitable for any type / make / size of ceiling fan .

S&F MS hook and clamps MS flat iron of existing size after taking out old rusted hook & clamp etc.for hanging/fixing of ceiling fan including cemented work all as specified & directed.

Rewinding of the motor of AC ceiling Fan of any make and size 1200 / 1400 mm sweep with super enamelled copper wire of existing gauge to obtain the specified and satisfactory RPM as per manufacturers specification, including replacement of all insulation materials, varnishing heating, drying, assembling of stator & rotor etc including including painting with one coat of synthetic enamel paint of existing colour codet and testing complete all as directed by Engineer-in-Charge.

S&F MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of 4 way TPN, 415 Volts fixed in wall,making good disturbed surfaces, including taking down complete all as specified.

Supply and fixing of VTPN double door load line DB LL 12 Way DD VERT W/O MCCB double door suitable for TP/FP 'G' frame MCCB and fitted with bus bar, neutral links and blanking plate, IP-43 (Cat Part No - DHDLVDOBGSFE12 of Havells or Equivalent).

S&F MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces including taking down complete all as specified.

S&F in replacement MCCB 4 pole with fixed thermal & magnetic release of breaking capacity 25kA, 415 Volts, 200 Ampcomplete all as specified and directed.

S&F in replacement Isolator, FP, 415 Volt 63 A TPN, of breaking capacity 35KA complete all as specified and directed.

S&F in replacement Isolator, FP, 415 Volt 100A TPN, of breaking capacity 35KA complete all as specified and directed.

S & F 40 Amp SPN C series 240 Volt complete all as specified and directed.

S&F MCB in replacement SP, 6-32 Amps, 240 volt, 'C' Series, 10 kA ( Cat Part No:- BB10320D of L&T or equivalent)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core

M&L Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised Iron Wire of size 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & GI Wire

Supply and fixing HDPE double wall pipe corugated pipe of size 50 mm dia for cable protection laid in trenches in lieu of sand/brick protection complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth getting out of soil for taking out or laying of pipe line etc complete all as specified and directedfor laying of cable, errection of poles, stay and pipe line, complete all as specified and as directed.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified.

Removal of surplus soil to a distance n. exc 50 m above the starting point complete all as specified.

Taking down defective ceiling fan from its position and refixing the same after repairs complete all as specified and directed. (NOTE: Spare parts to be replaced shall be measured and paid seperately).

PABITRA MOHAN PARIDA

HARI PALAI

RCB CONSTRUCTION

ANTARYAMI PANDA AND COMPANY

M/S JAGANNATH SASMAL