SPECIAL REPAIRS TO CAR PARKING OFFRS MD ACCN AFI, ADDN/ALTN TO ROOF AT CSD HO, PROVN OF NEW FITTINGS AND FALSE CEILING OIC AFT LEGAL, PROVN OF TWO CEILING AND SEVEN PEDESTAL FAN BLDG NO P-1 UNDER GE (WEST) COLABA, MUMBAI

Amount

Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles from the site all as specifed and directed. .

M&L first and premium quality of non skid, ceramic digital “coloured” matt finish, joint less tiles of size 400 x 400 x 6-7mm or thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell Sample as approved By GE.

M&L first and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm or 405 mm x 250 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell

M&L vitrified ceramic tiles dark or light shade/double charge /ultra charged digital tiles size n exc1.00 Sqm or 900 x 900 / 1200 x 600 x 10-12 mm thick (square/ rectangular) polished, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell

M&L vitrified ceramic tiles dark or light shade /double charge /ultra charged 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell

M&L for double/ultra charged vitrified tiles of 10 mm thick, area of each tiles not exc 0.42 sqm as in floors etc including 15mm thick screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles all as specified and directed.

M&L for double/ultra charged vitrified tiles of 10 mm thick, area of each tiles not exc 0.42 sqm as in skirting and dados including 10 mm thick rendering coat in CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floors including 15mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles all as specified & directed.

M&L in repairs Granite (of any type and size) 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over 15mm thick screed bed in CM 1:4 on kitchen platform, cill of window/ventilator/ flooring/border including rubbing, grinding and polishing all as specified and directed

M&L in repairs for Granite stone best quality (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismentling of stone slab complete all as specified and directed

M&L molding (sandwitch moulding) of granite slab edges including polishing all as specifed and directed.

M&L in repairs 20-25 mm thichk machine cut cudappa stone slab in horizental/vertical jambs laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & rounding to edges of slab as in window cills/jambs including screed bedding 10mm thick in CM 1:6 all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but including removing debris out side MD land all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan in any raddius in half brick thick walls built in CM 1:4 all as specified and directed.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg Up to fourth floor.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg Up to fifth floor.

Material and labour for 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished even and smooth without using extra cement, height of Bldg Up to fourth floor all as specified and directed. by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished surfaces even and smooth without using extra cement upto 5th floor all as specified and directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Material and labour for 15-25 mm thick ready mix plaster in multy layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, forHeight of Bldg above five Up to Eight floor., complete all as specified and directed.by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L for preparation of newly plastered surface of wall/ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE complete all as specifeid .

M&L for preparation of old surface of wall/ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided ll as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

M&L PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) finished surfaces even and rough to receive the tiles all as specified and directed

M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks for hold fast all as specified & directed.

S&F mild steel bends, strips , hold fast or small articles of FI or angle all as specified and directed

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size and applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length all as specified and directed

S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as specified and directed

S&F butt hinges cast brass with mild hinges pin, bright polished and fixed type B-11 of size 100mm all as specified & directed.

S&F 150 mm extruded brass handles, fabricated type polished all as specified & directed.

S&F brass barrel tower bolts of extruded section 200 mm long all as specified & directed.

S&F 300mm long brass sliding door bolts with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified and directed.

S&F 150 mm long aluminium alloy handle cast type anodized all as specified and directed

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section all as specified and directed

S&F 100mm long aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge, pin anodized all as specified and directed.

S&F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement including all accessories such as glazing clips, and rubber beadings for fixing glass panes in frame all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

S&F ACP sheet for doors including all necessary fittings all as specified and directed .

M&L for 3mm thick figured sheet glass, pin head type and glazing with oil putty in square nexc 0.5 sqm in each pane all as specified & directed.

S&F sheet glass 5.50 mm thick ordinary quality in square n.exc 0.5 sqm in each pane and fixed with rubber beads all as specified & directed.

S&F aluminium grill of size 7.5mm x 5.2mm bars of opening as per design DG No 103 of M/s Decogrille/ RG-103 of M/s Royal Grill fixed with aluminium channel 'F ' 20mmx15mm fixed in position with screw all as specified and directed.

S&F 15 micron coloured powder quoted aluminium grills 6 mm thick including F Sections all as specified and directed. Make : -Deco grill or equivalent make of Royal grill

S&F Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed with aluminium wire staples all as specified and directed.

M&L in repairs for galvanised M S wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

S&F in repair vitreous china Wall Hung WC Rimless bowl with cistern and PP Soft Close Seat cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 380x650x730 mm brown or any colour as decided by Engr in charge including making connection to trap and to flushing pipe and making good to floor all as Specified and directed. Make : Jaguar Model no FLS-WHT-5353PPZ

S&F PVC (SWR) "P"/"S" trap, 110/ 75 mm bore all as specified and directed.

S&F in repairs Health foucet including PVC pipe 1.50m long with brass nuts for EWC all as specified and directed Make : Jaguar Model No ALD577

S&F in repairs vitreous china cream colour Countertop wash basin size 425 x 340 x 175 mm excluding taps, waste, chain, and plug but including brackets & cutting for and pinning in end of brackets or erecting stand or neccessay fixing accessories all as Specified and directed. Make : Jaguar Model No CNS WHT 903

S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal from site all as specified and directed

S&F GI tubing medium grade 15mm bore pipe with all fittings and fixtures laid to walls and ceiling or laid in floors all as specified and directed

S&F UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors all as specified and directed

S&F in repairs pillar taps cost copper alloy fancy type with capstan head, chromium plated, screwed down high pressure with fly nuts screwed for 15 mm bore iron pipe and fixed all as Specified and directed. Make : Jaguar, Model No FLR 5347SD

S&F in repairs Chromium plated brass angle valve 15mm bore pipe all as Specified and directed. Make : Jaguar Model No FLR 5053N

S&F in repairs, Conceled angle valve cock chromium plated brass fancy type bore 15mm all as Specified and directed. Make : Jaguar Model No FLR 5083NK

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm all as specified and directed.

S&F in repairs 15 mm dia bib taps cast copper alloy with Chromium plated screwed for iron pipe or upvc pipe or for brass ferrule and fixed all as specified and directed. Make Jaguar model no FLR - 5047 N

S&F in repairs brass cp towel ring with all necessary fittings all as specified and directed. Make Jaquar Model No AQN-7721

S&F in repairs brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long, between flanges all as specified and approved.

S&F in repair s/s toilet paper holder with s/s flip including all necessary fittings all as specified and approved. Make Jaguar model no AKP35753PS

S&F in repair s/s grab bar 450 mm long including all necessary fittings all as specified and approved. Make Jaguar model no AHS1503

S&F PVC (SWR) 75mm bore bends any radius all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius all as specified and directed.

M&L in repairs for PVC nahani trap with grating 75mm dia outlet jointed to waste pipe fixed in cement concrete type (1:2:4) all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F in repairs PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets all as specified and directed.

M&L for POP ceiling including cornice of POP fixed on anodised snap grid frame work for false ceiling with size of grid 605x605mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm (wt 0.24kg/RM) and 23.5 x 26.4 x1.4mm (wt 0.191kg/ RM) respectively including aluminum angle 25x25x1.4 mm & provn of hangers of GI wire of 2mm dia and providing painting with two coat of synthetic enamel paint over a coat of primer on wooden surface all as specified and directed.

M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 all as specified and directed with following:- (a) M&L plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25 x 25 mm (b) S&F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) S&F GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) S&F for E-board ceiling tiles of size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

S&F in repairs 18 mm thick both side pre laminated HDHMR Board of any colour, matt surface finish, grade I as per IS 14587, for frame and shutter for kitchen cabinets/ vanity complete with all necessary fittings like ss hinges, brass, handles and magnets all as specified and directed. Make:- ActionTesa/ Greenply and archidply

S&F & fabrication of 3.5 mm thick Exterior aluminium composite panels (ACP) in wooden colour or as decided by Engr in charge, as in door, wall paneling, facia of roof, porch and columns, etc. in panels including fixed with Aluminium frame work, Aluminium frame section of size 25 mm x 38 mm and with screws ACP panels joints sealed with silicon tape, glazing tape etc all as specified & directed.

M&L multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with ttoal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed.

M&L multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume plain steel sheet. The feed material is to be manufacture out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%) and silicon (1.5%) with toal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed by Engr-in-charge.

S&F rolled mild steel sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified & directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges all as specified & directed.

Dismantling plain or corrugated, semi corrugated steel sheeting any gauge, thikness including nainital or similar pattern roof coverings including ridges all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M& L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from 5th floor upto 08th storeys height of bldgs bldgs complete all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

Taking down door chowkhat with shutter area exc 1.5 Sqm but nexc 4.00 sqm each (without taking off shutters from the frame) all as specified & directed.

Taking down door chowkhat with shutter area n exc 1.5 Sqm each (without taking off shutters from the frame) all as specified & directed.

Dismantling of timber in scantling unframed work 40sq.cm and over in section in any positions all as specified and directed.

Taking down wall panelling and similar work, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work all as specified and directed : sample as approved by GE

S&F 2 mm thick veneered desinger natural wood grain sheet fixed with adhesive as per manufactrue instructions to plywood work sample as approved by GE all as specified and directed.

S&F plain fillets of second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exc 6 Sqcm but not exc 13 Sqcm sample as approved by GE all as specified and directed.

S&F decorative fillets of Ist class hard wood, secured with nails or brads; sectional area exc 3 Sqcm but not exc 6 Sqcm sample as approved by GE all as specified and directed.

Taking down existing wall finishes of any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign materials and making good minor cracks in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth & applying two coats of exterior emulsion paint white or tinted over priming the surface with al-kali resistance priming paint all as specified and directed.

M&L for french polishing on new wooden surfaces of any description,width or girth including cleaning and preparing the surfaces and a coat of wood filler with two or more coats all as specified and directed..

M&L for french polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surfaces, with two or more coats all as specified and directed..

M&L in repairs point wiring concealed type including rigid non-metallic PVC heavy duty conduit of 20/25 mm dia size, cutting chases for sinking for concealed boxes for wiring with 1.5 sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade with flush type metal boxes suitable for fixing switches, sockets and fan regulator, etc. white or any colour cover plate with brass screws and cup washers including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one light point controlled by one switch, making good to the disturbed surfaces to match with the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I for one light point / Ex Fan / wall fan controlled by one switch 1 way 6/10 amps 1 module.

All as per serial item No.89 here-in before but for One 3 pin socket point 5 Amps on independent board.

S&F in repairs Switch piano, flush type single pole, one way 5 Amp all as specified and directed.

S&F in repairs switch socket combination 2/3 pin 5 Amp, flush type all as specified and directed.

S&F wall fan 400 mm sweep, air delivery 75 cmm, 1380 RPM , 230 volt AC, 50 Hz, 59 Watt all as specified and directed. Make: BAJAJ Neo-Spectrum equivalent make of Havells/Crompton Greaves.

S&F pedastal fan 600mm sweep, air delivery 250 cmm, 1440 RPM, 230 volt AC, 50 Hz, 200 watt all as specified and directed. Make: Bajaj Supreme plus ASIN B07P5HWDRK or equivalent make of Havells/ Crompton Greaves.

M&L in repairs sub main wiring (concealed type), with two single core 6 sqmm multi-stranded copper conductor wire (FRLSH) with one run of 6 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly and including rigid non-metallic PVC heavy duty conduit (ISI mark), 20/25 mm dia suitable size including cutting chases for conduits for concealed conduit wiring with all fittings and accessories and making good to the disturbed surfaces to match with the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint to match with the existing colour in disturbed surface area all as specified as directed. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduit shall be measured as one length. Make of Cable : Anchor / Havells / Finolex / Polycab.

M&L in repairs for point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI marked) 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for concealed boxes and for concealed conduit wiring with all fittings and accessories including modular cover plates 2 way, 3 way, 6 way as required with and fix conecaled 1.2 mm thick pressed steel modular sunken box, suitable for fixing moduler switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match with the existing surfaces (fill up cement in gaps, finishing with putti and apply two coats of paint to match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I for one light point / Ex Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module all as specified as directed. Make of Cable : Anchor / Havells / Polycab

All as per item No 100 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & as directed by engr-in-charge.

All as per item No. 100 here-in before but for One 3 pin socket 6/10 amp, 2/3 pin combined 2 module outlet on independent board.

All as per item No. 100 here-in before but for One 3 pin socket 6/10 amp, 2/3 pin combined 2 module outlet on same board.

All as per item No. 100 here-in before but for One ceiling fan controlled by one switch & regulator.

S&F moduler switch, flush type single pole, one way 6 Amp all as specified & as directed.

S&F modular socket outlet 2/3 pin combined 2 module, 06 amps all as specified & as directed.

S&F modular switch one way 16 Amp one module all as specified & as directed.

S&F modular socket outlet 2/3 pin combined 2 module, 6/16 amps all as specified & as directed.

S&F modular type fan regulator, 120W, 2 module all as specified & as directed.

S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals all as specified and as directed. Make:- SSK, Anchor, Kinjal, Fine

S&F in repairs MCB SP 240 volt, 6 to 32 Amps, C series all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.

S&F in repairs MCB SPN 240 volt, 20 to 63 Amps, C series all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.

S&F in repairs sheet metal enclosures double door for DBs when MCBs to be used 240 volts, 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

S&F in repairs 20 watt LED, 6500 K, 4 feet long fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing all as specified and directed. Make:- Wipro, Model No : Wipro Garnet 10W LED Batten 6500K. Make : Wipro Garnet 20 W LED Batten 6500K

S&F in repairs LED 18 watt recessed mounted circular down lighter fitting 1440 Lumin per Watt, decorative type, with electronic edriver of same make connecting cable three PVC insulated and PVC sheathed copper flixible cable of size 16/20 mm and necessary fixing arrangement all as specified & as directed. Make : Havells Octane Square LED Recess Panel 18W 3000K. Wipro, Model No : Wipro Garnet 18 W LED Batten 6500K .

Excavation in trenches, n.exc 1.5 m wide & n. exc 1.5 m depth for foundation & getting out in hard/dense soil all as specified and directed.

M&L PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in foundation and filling mass filling all as specified and as directed.

Use & waste form work to sides of concrete foundation footing bases of columns, rafters etc rough finish surface of concrete flat edges of footings all as specified and as directed.

Use & waste formwork to sides of columns square trangular, or rectangular in section rough finish surface of concrete flat all as specified and as directed.

M&L RCC M-30 grade Design Mix (using 20mm graded crushed stone aggregate) as in pillar, posts, column all as specified and directed

M&L MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending including necessary welding as required & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips all as specified and as directed.

All as per item No 24 above but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders/tempreture bar all as specified and as directed.

M&L 100 mm thick PCC 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) for flooring, finishing surfaces even and smooth without using extra cement Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed.

M&L for forming 12mm thick expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grage 'A' Thickness of concreate slab in 100 mm all as specified and directed.

Anil Industrial Corporation

Unitech Enterprises

Nilesh Construction

SHREE JAGDISH FURNITURE CO.

MAHESH ENTERPRISES

ORIENT ELECTRIC CO

Bright Construction Co

Bidder Name

Unitech Enterprises

ORIENT ELECTRIC CO

Nilesh Construction

Anil Industrial Corporation

Bright Construction Co

SHREE JAGDISH FURNITURE CO.

MAHESH ENTERPRISES

N F ENTERPRISES