Renovation of RTA office at First Floor in Admn. Block of Mini Sectt. Complex at Nuh in Nuh Distt.

Amount

Providing and fixing tiled false ceiling of specified materials of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. (HSR 9.47.3)

DIVA-Revolving Low Back Fixed Loop Arms GB 411seat/back assembly: the seat made from 1.2 ±0.1 cm. thk. hot pressed plywood and back should be injection moulded from black co-polymer polypropylene upholstered with fabric and moulded polyurethane foam together with seat and back covers. the back foam should be designed with contoured lumbar support for extra comfort. seat size: 45.ocm(w) x 42.0cm.(d) back size: 39.0cm(w) x 38.0cm.(h) seat / back covers: the seat and back covers should be injection moulded in black co-polymer polypropylene. high resilience (hr) polyurethane foam : the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m3 and hardness load 16_± 2_kgf as_per should be :7888 for 25% compression. armrest assembly: the one-piece armrests should be injection moulded from black nylon. the armrests should be fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. hr steel.Overall Dimensions of ChairSeat Height - min 43.0 to max 54.0cm.Height - min81.5 to max 92.5cm.Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm.permanent contact mechanism: the permanent contact mechanism should be designed with the following features:• 360° revolving type.• 14° ±2°maximum back-tilt only• upright, position locking.• tilt tension adjustment. pneumatic height. adjustment: the pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. telescopic bellow assembly: the bellow should be 3 piece telescopic type and injection moulded in black polypropylene. pedestal assembly: the pedestal should be injection moulded in black 30% glass-filled nylon and fitted with 5 nos.: twin wheel castors. the pedestal should be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). twin wheel castors: the twin wheel castors should be injection moulded in black nylon.

3 Seater Matrix w/o arms & with cushion MAGNUM 3 SEAT SHELL : The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) BACK SIZE : 41.6 cm (W) x 23.0 cm (H) UNDERSTRUCTURE ASSEMBLY: Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring.Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment. ARM REST ASSEMBLY: Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame. SIDE TABLE ASSEMBLY: It should be a welded structure assembly made of 0.12±0.013cm thk CR steel sheet with oblong perforations which should be welded to side strip of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powdercoated ( DFT 40-60 microns ) and fitted to understructure assembly. SIDE TABLE SIZE: 20.0 cm (W) X 37.2 cm (D) .Overall Dimensions of Chair-Seat Height - 44.1 cm.Height - 78.5 cm.Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm.

2 seater Matrix w/o arms & with cushion MAGNUM 2 seat shell : the seat shell should be a welded assembly of seat,back and side frame. the seat and back should be made of 0.12±0.013cm thk cr steel sheet with oblong perforations.they should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk hr steel.the welded assembly should be powder coated ( dft 40-60 microns ). the seat has a front water fall edge to provide popliteal clearance for comfortable seating. it also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. clean and flat surfaces of seat and back aids in easy maintenance. seat size : 47.8 cm (w) x 44.6 cm (d) back size : 41.6 cm (w) x 23.0 cm (h) understructure assembly: understructure assembly consshould be ts of connecting beam and leg assembly made of m.s. e.r.w. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.the welded structure assembly should be powder coated ( dft 40-60 microns ).the leg assembly should be fitted with shoes and levellers in nylon. the leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. the shoes fitted to leg assembly help in aligning the structure for back to back arrangements. levellers take cshould be of uneven flooring.connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment. Overall Dimensions of Chair-Seat Height - 44.1 cm.Height - 78.5 cm.Width & Depth of Chair as - Width-114.5cm and Depth-63.8 cm.

Double Bed – Queen Adriana with 5” mattress – Hero Overall Size :Length - 2060.0 mm Width - 1733.0 mm Height - 945.0 mm Material:Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom pliilth are made of 25 mm Thick Prelaminated Particle Board. Plinth support assembly is made of M.S. 25 mm square pipe in 1.2 mm thickness. Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Construction:Knock Down construction. Packets:1 Bed in 2 packets. Finish:18 mm thick Prelaminated Particle Board is in Walnut shade. Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10),GreenPro certified bed by CII Hero Mat 78 60 5

MERAKI MediaUnitBrn/Beige Overall Size : Width : 180.4cm Depth : 49.5cm Height : 50.4cmMaterial :All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Drawer bottom is made of .9 mm thick prelaminated particle board. Drawer front is made of 18 mm thick PU painted MDF. Middle doors are made of 4mm thick toughened glass with PU paint in black .All drawers are fitted with knobs. Legs : Rubber wood Hardware : Hettich .Construction : Knock down .Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 2 nos; GreenPro certified by CII

L shape table – Table 2100W EXCLUSIVE 7 Ascent Desk With ERU RHS size shall be 2100 Width mm x 1600 Depth mm x 765 Height mm .The main top shall be of Particle board (Melamine Finish) 1800 x 795 mm.The top shall be 25 mm thick plus 15 mm frame and 2 mm PVC lipping on top .Also there shall be 0.35 mm PVC lipping on frame.The Modesty panel shall be 1100 x 405 x 46 mm thick particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The Drawer Front shall be of size 500 x 170 x 16 mm thick Particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The KBPT shall be 578 W x 284 D x 16 mm with 0.35 mm Thick PVC lipping.The ERU shall have all panels of 16 mm thick Particle board (Melamine Finish).

Providing and fixing white vitreous chinaware pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaware flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISi marked white solid plastic seat and lid (HSR 22.24.1)

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with i/d. (HSR 22.36.1) (Labour Rate)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm. (HSR 22.221.2) (Labour Rate)

Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint. (HSR 22.16) (Labour Rate)

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (HSR 22.209) (Labour Rate)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (HSR 22.106) (Labour Rate) Bib cock long body

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 150 mm diameter. (HSR 22.102.2) (Labour Rate)

M/s A.B. Construction