REPAIR/REPLACEMENT OF INTERNAL WIRING OF MD ACCN OF ME LINE, ANANT NAGAR, ASD LINE AT COD AND COMPREHENSIVE REPAIR/MAINT OF INTERNAL WIRING OF OFFRS MD ACCN OF ZONE B, MD ACCN AND OTM ACCN UNDER AGE EM OF GE (EAST) JABALPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, power point or bell point etc) complete including fixture and fitting such as switches, ceiling rose holders & regulators light fittings etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down carefully copper/aluminium Sub Main wiring/service connection of any size from surface/connected/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc, and for one light/fan point controlled by one switch including 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly & to be terminated in & inclusive of MS sunken box 1.2mm thick (flush metal box) for mounting of fittings like switch, socket , fan regulator etc complete with 3mm thick laminated switch board cover complete all as specified and directed.

All as per srl item No 3 above but for One light point controlled by One switch complete all as specified and directed.

All as per srl item No 3 above but for One bell point controlled by One bell push complete all as specified and directed.

All as per srl item No 3 above but for One ceiling fan point controlled by One switch complete all as specified and directed.

All as per srl item No 3 above but for One exhust fan point controlled by One switch complete all as specified and directed.

All as per srl item No 3 above but for One light point controlled by Two way switch complete all as specified and directed.

All as per srl item No 3 above but for One 3 Pin, 5/6 Amps socket outlet point, on the same board with with 1.5 Sqmm cable size etc complete all as specified and directed.

All as per srl item No 3 above but for One 3 Pin, 5/6 amps socket outlet point, independent board with 1.5 Sqmm cable size etc complete all as specified and directed.

All as per srl item No 3 above but 2.5 Sqmm copper conductor for 5 Pin 15 Amps switch socket combintion on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and existing concealed/open conduit including all accessories etc, and for one light/fan point controlled by one switch including 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly & to be terminated in for mounting of fittings like switch, socket , fan regulator etc complete with 3mm thick laminated switch board cover complete all as specified and directed.

All as per srl item No 6 above but for One 3 Pin, 5/6 Amps socket outlet point, independent board with 1.5 Sqmm cable size etc complete all as specified and directed. .

All as per srl item No 6 here-in-before but 2.5 Sqmm copper conductor for 5 Pin 15 Amps switch socket combintion on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc, heavy duty ISI marked with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly, covered with modular white cover palte with inner frame suitable for modular swithes, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

All as per srl item No 9 above but for One light point controlled by one, one way switch 5 Amps complete all as specified and directed.

All as per srl item No 9 above but for One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed.

All as per srl item No 9 above but for One 3 pin 5 Amps switch socket outlet point controlled by one, one way switch on the same board complete all as specified and directed.

All as per srl item No 9 above but for One 3 pin 5 Amps switch socket outlet point controlled by one, one way switch on indelpendednt board complete all as specified and directed.

All as per srl item No 9 above but forOne bell point controlled by one, one bell switch 5 Amps complete all as specified and directed.

All as per item No 9 aboveefore but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS, PVC insulated unsheathed 1100 Volts grade for 5/15 Amps witch socket combination point including necessary running of 2.5 Sqmm copper conductor FRLS, PVC wire as earth continuity conductor alongwith wiring an connecting to the common earth dully, complete all as specified and directed.

S&F switch piano flush type 5/6 Amps, 230 Volts, single pole, one way, ISI marked complete all as specified and directed.

S&F bell push flush type 5 Amps complete all as specified and directed.

S&F switch piano flush type 15 Amps, 230 Volts, single pole, two way, ISI marked complete all as specified and directed.

S&F 5 pin socket outlet, 5/6 Amps / 3 pin 5/6 Amps, flush type, ISI marked complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 Pin, 5 Amps flush type, ISI marked complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 Pin, 15 Amps flush type universal, ISI marked complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65 x 20mm, 3 terminals complete all as specified and directed.

S&F electronic dimmers, 450 Watt, 250 Volts flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

S&F for modular switch piano flush type, single pole, one way and 5/6 Amps, single modular complete all as specified and directed.

S&F for modular switch piano flush type, single pole, one way and 15/16 Amps, single modular complete all as specified and directed.

S&F for Bell push modular 6 Amps single module complete all as specified and directed.

S&F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amps and 2 pin, 5/6 Amps, 2 module piano flush type complete all as specified and directed.

S&F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amps and 3 pin, 5/6 Amps, 2 module piano flush type complete all as specified and directed.

S&F for modular step type fan regulator 120 Watt 2 module suitable for 230 Volts 50 Hz AC supply complete all as specified and directed.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for battan fittings complete all as specified and directed.

S&F for Bell Electric Ding dong type suitable for operation on 230 Volts 50 Hz, AC supply etc complete all as specified and directed.

M&L for Sub Main wiring (concealed type) in & including with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 6 Sqmm cable, one run (with Green colour for Earth) of 6 Sqmm cable and one run of PVC conduit shall be measured as one unit.

M&L for main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVC insulated with 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 4 Sqmm cable, one run (with Green colour for Earth) of 4 Sqmm cable and one run of PVC conduit shall be measured as one unit.

S&F for highly efficient LED bulbs, 10 Watt used as a ready replacement for existing GL/CFL/direct fit lamp, in B-22 capacity complete all as specified and directed.

S&F LED lights fitting 1 x 9 Watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceilig rose comnplete all as specified and directed.

S&F round shape 12 Watt, 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specefied and directed.

S&F 1 x 10 Watt LED light mirror type with high out put diffuser 2 feet, 10 Watt, 220 Volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size comnplete all as specified and directed.

S&F LED lights fitting 1 x 20 Watt, 220 Volt, AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose comnplete all as specified and directed.

S&F for LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, 220 Volt recessed type with high efficieny PMMA diffuser soft glare free light complete with drovers, holders, LED lamp suitable for roof ceilling, including connecting up with driver three core flexible copperr conductor cases of suitable size complete all as specefied and directed.

S&F LED street/security light fitting 35 Watt, 230 Volt, AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed.

S&F for sheet metal enclosure MCB DB TPN 4 Way vertical type with 200 Amps rated bus bar 415 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F for sheet metal enclosure MCB DB SPN 8 Way vertical type with 200 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one double pole MCB 20 Amps, 10 KA 240 Volt complete all as specified and as directed.

S&F MCB triple Pole and neutral rated capacity 63 Amps, 415 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F MCB single Pole and neutral rated capacity 40 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F MCB single Pole and neutral rated capacity 5 to 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

M&L for dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with greasing the same with approved grade of grease, making all electrical connection and fixing and connectiong on its existing position and testing on completion complete all as specified and directed.

M&L for taking down & refixing after overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed. Note : (a) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (b) The spares required shall be measured and paid separately in the relevant items.

Supply, fixing and connecting up flexible copper wire twin core of 23/.0078 complete all as specified and directed.

Supply only gun metal bush of any size (Make - MSP/TATA/SKF). complete all as specified and directed.

Supply only bearing for ceiling fan (Make - MSP/TATA/SKF No.6201/6202) complete all as specified and directed.

Supply only fan condensor 2.5 MFD (Make – USHA / UNIVERSAL) complete all as specified and directed.

Supply only split pin complete all as specified and directed.

S&F of MCCB 63 Amps, 4 Pole, 415 Volt, 16 KA, 'C' series complete all as specified and directed.

S&F of MCCB 100 Amps, 4 Pole, 415 Volt, 16 KA, 'C' series complete all as specified and directed.

S&F of MCCB 160 Amps, 4 Pole, 415 Volt, 16 KA, 'C' series complete all as specified and directed.

S&F MCCB 200 Amps, 4 Pole, 415 Volt, 16 KA, 'C' series complete all as specified and directed.

S&F of MCCB 350 Amps, 4 Pole, 415 Volt, 16 KA, 'C' series complete all as specified and directed.

S&F of MCCB 400 Amps, 4 Pole, 415 Volt, 16 KA, 'C' series complete all as specified and directed.

S&F Single phase static Energy meter of Accuracy Class 1.0, 240 Volt, 50HZ with backlit LCD, of rating 5-30 Amps (measures & display KWh, KVAh, V, I, KW, PF, last month history of KWH & MD in KW) with special features like TOD Tamper logging, optical communication Port & Dislay in Absence of Power with Transparent Hinge Type Box, Energy meter shall be confirming to IS-16444 complete all as specified and directed. Note : Unserviceable Electric meter shal be depositd to MES Yard and rateis deemed to be inclusive in item rate.

S&F AC three phase static Energy meter of Accuracy Class 1.0, 3 x 240 Volt, 50HZ with backlit LCD, of rating 5-30 Amps (measures & display KWh,only) & Dislay in Absence of Power with Transparent Hinge Type Box, Energy meter shall be confirming to IS-16444 complete all as specified and directed. Note :- Unserviceable Electric meter shal be depositd to MES Yard and rateis deemed to be inclusive in item rate.

M&L for disconnecting electric wiring of Electric single/three phase Meter & again re-fixing after repair/maint at old existing or new places and connection of electric wiring complete all as specified and directed.

S&F for decorative wall light fixture made up of Polycarbonate, suitable for 9 Watt LED lamp B-22 base capacity complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR Par - I (2009) including PCC foundation/chamber in mix 1:2:4 type B-1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note : Earth protection pipe & earthing wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Schedule of credit amount of Rs. 87,366.00 to be deducted during AOC.

Goodluck Enterprises