Complete development of power department Complex which includes construction of Store room under the head allied works

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement::1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Providing & fixing upto floor five level precast compressed earth solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) including of carriage

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia and length (hold fast lugs or with dash fastners shall be paid for separately) Second kail wood : Second class kail wood

Providing and fixing ISI marked flush door shutters 35mm thick conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 4 mm thick glass pane (weighing not less than 10 kg/sqm)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete : 40mm thick with 20 mm nominal size stone aggregate.

Cement plaster in fine sand (internal plaster are for height upto 10m from ground level unless otherwise stated.) 12mm cement plaster mix: 1:4 (1 cement : 4 fine sand)

External Plaster ( 12mm cement plaster 1:4) external plaster are for height upto 10m from ground level unless otherwise stated.

Ceiling: 6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

External Finishing: Finishing walls with water proofing cement paint of required shade New Work : ( two or more coats ) applied@ 3.84 kg/10 sqm

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. : 1 mm thick

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content: With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Stone Soling and dry stone pitching including the costs of stone in horizontal 50mm thick

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Providing and fixing 85x42mm chromium plated brass pull bolt lock with necessary C.P. brass screws, nuts, bolts and washers etc. complete

Providing and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screw etc. complete as per direction of Engineer-in-charge. Anodized (AC 15)aluminum tubular handle bar

Providing and fixing of door windows fixtures, like hinges, L-drop, tower bolt with accessories complete Job

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.. Group B

Wiring for light/power plug with 2X4 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No 4sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for circuit /submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3pin 5/6 amps & 15/16 amps modular switch connection etc as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6pin 5/6 amps & 15/16 amps modular socket outlet and 15/16 amps modular switch connection etc as required

Supplying and fixing of following rating 240/415 Volt's C series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissionig (Above to 16 Amp)

Carriage of cement and steel from source to site of work by Mechanical Transport including loading, unloading and stacking avg 5km

Carriage of sand aggregates and other construction materials from source to site of work by y Mechanical Transport including loading, unloading and stacking avg 20km

Providing and applying of red oxide and paint to the shutter door of storeshed of EPD and STD at choglamsar complete job including the cover for the shutter door