Construction of Pump House RD 37000 of Meham Drain X-ing Kalanaur Minor at RD 24500

Amount

Earth work exacavation in ordinary soil exclusive of compensation of earth including breaking of clods and dressing with a combied lead of 75 mts complete in all respesct as per HSR itm No. 6.2

Preparing watering and ramming surface for laying concrete in head works.(HSR item No. 10.122 (a) (i))

Centering and shuttering of concrete foundation and foundation beams HSR item No. 9.13

Design mix cement concrete of grade M-15 with minimum cement contents 240 Kg per cum in foundation and plinth. HSR item No. 10.64 (A&C No. 32 dt 11/11/2019)

Design mix cement concrete of grade M-25 with minimum cement contents 300 Kg per cum in foundation and plinth. HSR item No. 10.66 (A&C ship No. 30 dt. 25/10/2019)

Design mix reinforced cement concrete of grade M-25 with minimum cement contents 300 Kg per cum in first storey upto 4.00mts height above plinth level HSR item No. 10.73 (A&C ship No. 30 dt. 25/10/2019)

Centering and shuttering for faces of walls, partitions, retaining walls well steining and the like (vertical and battering) including attached pilasters, butteresses etc. HSR item No. 9.5

Centering and shuttering for slab curverts with smooth exposed surface of slab upto 3 mtrs span (HSR item No. 9.18)

Rehandling structures with earth work excavated from foundation and trenches with a combined lead of Kassi work (HSR 6.1 (a))

Pudlling of earth HSR item No. 6.2(f)

Ist class brick work laid in cm 1:3 in F&P i/c supply and C/O all materials and curing etc. as per HSR item No. 11.5

Ist class brick work laid in cement sand mortar 1:3 in super structure i/c supply and C/O all materials & curing etc. HSR item No. 11.10

10 mm tjhick cement plaster 1:3(HSR item No. 15.2)

Providing weep hole in F.O. wall i/c well drainage filter (NS item)

Supply of cold twisted deformed (ribbed/tor steel ) bars for RCC works where not included in the complete rate of RCC i/c bending and placing in position complete (HSR item No. 18.22)

Providing and fixing in position caution iron board 4'x3', 500' U/s & D/s 500' from diversion of channel (NS item)

Sand filling behind abutment, wing walls and F.O. Walls with an averagwe lead of 1.0 Km i/c loading and unloading (HSR item No. 5.2 (a) 4(i))

Filling loose stone boulders in bed of drain

Structural steel work in compound girders or stanchions built up from two or more R.S. joists or channel section or plate and angle revitted including cutting and fixing all latice bars, sifferners, gusset plates bolts, nuts rivets etc, complete with hoisting and errection in position. (HSR itemNo. 18.5(a))

Steel work fixed independently with out connecting plates i/c cutting hoisting and fixing in position (HSR item No. 18.1 (b))

Providing and fixing gate & gearing as per approved design and specification complete in all respect

Structureal steel work in angles, tees, and flates welded including cutting fixing all gussets plates bolts, nuts, welding rods, etc, with hoisting and errecting in position for roofs trusses, well kerbs, plates and trussed girders, ets of any span for building and bridges. HSRT item No. 18.7

Corrugated G.I. sheets roofing 0.8 mm thick with G.I. hooks 10 mm dia G.I. impact and bitumenous washers complete excluding cost of perliner rafters trusses. (HSR item No. 13.18)

Ridges ane valleys 45 cm over all in plain GI sheets 0.80 mm thick fixed with galvanized iron J and L hooks 10 mm dia GI limpet and bitumen washers, complete. HSR item No. 13.23

Planking of commercial hard wood such as hillock champ chikrasy planed on both sides rebated and fixed in position i/c nails and screws etc. 50 mm thick (HSR item No. 17.16) (a)

Supply and fixing rolling shutters of approved make , M.S. Laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pi[pe shaft with brackets side guides, 2.50 cm long wire spring grade no 2 and arrangement for insid and outside locking with push and pull operation complete including top cover 0.80 mm thick. HSR item No. 18.18 (b)

Supplying openable steel doors and windows of standard steel section joints mitred and electrically flash welded including provision for arrangement of receiving handles, peg stay catcher will also be welded with the frame and finishing with one coat of read mixed red lead not setting primer (HSR item No. 18.24)

Providing and fixing fan hook 80 cm each size of required shake and size 16 mm dia (HSR item No. 18.38 (a))

Wire gauge 140 G. or 120G design fixed on steel windows of standard rooled stel section of 3 mm thick flate iron cover moulding of 12.5 mm wide fixed with machine screws complete all respect HSR item No. 18.32

Applying primary coat on steel or iron work i/c HSR item No. 16.9

Painting two coats excluding priming coat with ready mixed paint for metelled surface in all shades on new steel works (HSR No. 16.17)

White washing three coats (HSR No. 16.48)

Providing and laying filter media with breif ballast of varing sizes HSR item No. 10.117

Supply TL 100-TLA 3-1.5 M, GMATC -350, TL P2, all gripple make

TL 100 - TLA 3 - 1.5 M, GMATC - 350, TL P2, and levelling competetion cleaning and installation of gripple anchors and installation of additional pins

m/s omparkash contractor