20/EEC/BSNL/CD/BGL/2023-2024

Amount

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound )content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work

Two or more coats on new work

Distempering with 1st quality acrylic distemper, having VOC content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

One or more coat

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :

One or more coat

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Dismantling old/damaged Wash basins of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

15 mm nominal bore

Providing and fixing 15mm nominal bore C.P. brass water supply fittings with wall flange of specified brand & make including removing & disposal of old fitting complete as directed

Two-Way stop cock of Kerovit or equivalent make

Two way bib cock of Kerovit or equivalent make

Two in one wall mixer (Parryware make) with CP bend pipe for shower line and matching flange

Swan neck pillar tap (Jaquar make) with matching flange

Pillar tap with foam flow (Jaquar make Aria:ARI-39011)

Pillar tap with foam flow (AVILLS Make)

Providing and fixing on wall C P Brass soap dish with CP Brass holder & glass dish (JAQUAR model ACN-1131N or equivalent) with matching screws etc. complete.

Providing and fixing glass shelf 600mm long with edges polished, decorative CP brass support bracket and guard rail (JAQUAR Make) complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing on wall face Health Faucet of ABS Body including 1.20 Meter Long PVC flexible pipe & Wall Hook

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe- 32 mm dia.

Providing and fixing stainless steel waste coupling for wash basin of approved quality and colour including brass check nut and rubber washer and removal and disposal of old coupling etc. complete.

Waste coupling 31 mm dia.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm +2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

30 mm thick plain PVC door shutters

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing STAINLESS STEEL wire mesh in aluminium windows including cutting and fixing the mesh in frames complete (Note Dismembering, refixing of aluminium members of shutter shall be paid under relevant repairs item of shutter)

Providing necessary repairs to the damaged Aluiminium doors by removing the door shutter by removing the screws and butt hinges as the case may be) and refixing the door in original position after removing the bend/ undulations in the door (members either horizontal or vertical or replacing the member it self all complete as per the directions of Engineer in charge. Note: The approximate door area to be repaired shall be 2.5sqm

Repairs to the aluminium window frames by removing the dirt inthe runners of the sliding windows and making the shutters to slide smooth, all complete as per the direction of the Engineer in charge Note: The approximate window area to be cleaned shall be 2.5 sqm

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

P/F stainless steel 25mm dia. pipe curtain rods including pair of matching brackets fixing with SS screws. complete

P/F stainless steel decorative type 25mm dia. finials/end knobs of approved pattern for curtain rods complete as directed

Providing and fixing vertical blinds of approved shade, quality brand and manufacture including necessary fixtures such as Rails, Carrier, tracks and wheels, Tilt shaft, Traversing chord, Bead tilting chain, Louvre spacer links, gears, Sprocket wheels, end caps, Bracket attachments and accessories etc, compete as directed.

Providing and fixing flexible/washable nylon mosquito mesh of approved make NETLON or equivalent with necessary velcro and fixing to the existing frame with necessary adhesive all complete as directed by Engineer-in-Charge

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness

Cleaning of toilet intensively to remove dirt, hard water stains, yellwo sticky patches in the corners, of daddo tiles tile joints, W/C pan, W/B pan, water taps, exhaust fan, Gyser, flush tank etc. removing hard water stains, dirt deposit from floor tiles, with scrubing maching using soft fibre pads and application of sofetning chemicals, mopping out entire toilet & fittings with fibre cloth and placing in position toileteries removed for cleaning complete as directed.(Note- The work shall be carried out by specialised technicians having experince of intensive cleaning job)

Room attached toilet of tile area of 25sqm to 40.00sqm

Applying reactive chemical treatment over existing cement based treatment to arrest seepage using ZYCOSIL PLUS of Zydex industires or equivalent as per manufacturers specifications applying in the ratio of 1:20 (1ZYCOSIL PLUS : 20water) spraying with sprinkler gun as specified and curing the surface treated for 3days complete as directed.

Removing layer of algae/fungus growth above terrace surface with scrapper/brush application and detergent water including grouting of cracks, touch up of surface patch with cement paste etc. complete

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.