REPAIR/MAINTENANCE TO BROKEN FURNITURE AND POLISHING TO STEEL AND WOODEN FURNITURE ITEMS AT ARMY AREA UDAIPUR

Amount

Supply & replacement of seat/back of Chair steel tubler with/without arms made out of 1st class teak wood duly painted with two coat of synthetic enamel black paint and canning with 2.5 mm wide, 0.4mm thick half round, 2 Nos of plastic cane. Complete godrej pattern as per drawing No FD-224 sheet 1/1. Complete all as specified in drawing and as directed by Engr-in-charge.

(a) Seat frame (Size 455X420X22mm)

(b) Seat frame (Size 440X365X22mm)

(c) Back frame (Size 455X365X22mm)

(d) Back frame (Size 380X365X22mm)

Supply & replacement of hand rest for Chair steel tubler with arms made out of 2nd class hardwood duly painted with two coat of synthetic enamel black paint. Complete all as specified in drawing and as directed by Engr-in-charge.

Removing old broken/missing PVC shoe of following furniture items and Supply & fixing of hard PVC shoe of existing size & shape. Complete all as specified in drawing and as directed by Engr-in-charge.

(a) Chair verandah

(b) Chair steel tubler with/without arms

(c) Table 900X900X760mm steel

(d) Table dining OR

(e) Table office officer/clerk/typist steel

(f) Teapoy Verandah

Removing old unserviceable parts from Table 900X900X760mm steel and Material and labour for welding the new steel parts of Table 900X900X760mm steel made out of 25sq mm condute pipe by using gas welding including two coat of synthetic enamel OG paint. Complete all as specified in drawing and as directed by Engr-in-charge.

(a) Legs

(b) Sides

Removing old unserviceable parts from Table dining OR's steel and Material and labour for welding the new steel parts of Table dining OR's steel made out of 25sq mm condute pipe by using gas welding including two coat of synthetic enamel OG paint. Complete all as specified in drawing and as directed by Engr-in-charge.

(a) Legs

(b) Sides

(c) Short Stiffener

(d) Long stiffener

Material and labour for welding the new cross stiffener of Table 900X900X760mm steel made out of 25sq mm condute pipe by using gas welding including two coat of synthetic enamel OG paint. Complete all as specified in drawing and as directed by Engr-in-charge.

Removing old unserviceable parts from Table Office Officer/Clerk/Typist Steel and Material and labour for welding the new steel parts of Table Office Officer/Typist Steel made out of 25sq mm MS tube having 1.6mm wall thickness by using gas welding including two coat of synthetic enamel OG paint over a coat of red oxide. Complete all as specified in drawing and as directed by Engr-in-charge.

(a) Legs with PVC shoe

(b) Long Stiffener

(c) Short Stiffener

Removing old unserviceable parts from Table Office Officer/Clerk/Typist Steel and Material and labour for welding the new steel parts of Table Office Officer/Typist Steel made out of 1mm thick MS flat sheet cold rolled by using gas welding including two coat of synthetic enamel OG paint over a coat of red oxide. Complete all as specified in drawing and as directed by Engr-in-charge.

(a) Top of Table

(b) Right/left sides of box

(c) Back side of box

(d) Top/Bottom of box

(e) Drawer with 2 sliding angle

(f) Door with handle

(g) Top frame complete

Removing old unserviceable top of table dinning OR's steel including painting of steel frame work with two coats of synthetic enamel black paint Ist quality and supply and fix new top of prelaminated MDF board 18 mm thick commercial on both faces of size 2000mm x 700mm ISI marked and with & including supply and fixing aluminium sheet 22 gauge thick on top of table with screws complete all as specified in drawing and directed.

Removing old unserviceable top of following furniture articles and S&F of new top of 18mm thick prelaminated MDF board including 6mm thick beading of 1st class hard wood (teak wood) all around the top complete all as specified in drawing and directed.

(a) Table 900X900X760 mm steel

(b) Teapoy Verandah

(c) Table office officer steel

(d) Table office clerk steel

(e) Table Typist

Removing old unserviceable lock from Table office officer/ typist steel and S&F new mortise lock vertical type ISI marked with 2 Nos of key complete all as specified in drawing and directed.(Make-Harison/Godrej)

Removing of old painted steel surface, cleaning and dusting including removing dent if any and Material and labour for applying ofone coat of two coat of synthetic enamel paint OG/black/ white/Blue/Grey/Smokey Grey colour with appropriat shade using spray gun machine over a coat of primer on internal & external surface. Complete all as specified and directed for:

(a) Almirah large steel

(b) Almirah medium steel

(c) Book shelf open large/small steel

(d) Chair steel tubler with/without arms

(e) Form with/without back steel

(f) locker bed side steel

(g) Rack side steel 711X685X254mm

(h) Table office clerk/typist steel

(j) Table office officer steel

(k) Table900X600X760mm with/without drawer steel

(l) Table dining OR

(m) Teapoy verandah

(n) Book Case Steel 1675X840X305mm

(o ) Book Case Steel 1675X849X310mm

(p) Rack side steel 3 space with tray

(q) Rack steel 1830X760X1905mm

(r) Rack steel 975X900X300mm

(s) Rack steel adj type 1875X900X500mm /Rack steel1875X900X300mm

Removing old unserviceable parts from Almirah medium/large steel and S&F of new parts of Almirah steel medium/large with new mortise lock ISI marked with 2 nos of key and upper & lower MS rod and fixed with screws of existing size & shape with outer cover of lock complete all as specified in drawing and as directed by Engr-in-charge.

(a) Lock with 2 Nos of key Make-Harison/Godrej/ISI Mark

(b) CP Handle Make-Godrej

(c) MS Rod

(d) Cover of lock

(e) Locking device 3way Godrej pattern with nut bolt/screw

Removing old unserviceable parts from Almirah large steel and S&F of new parts made out of 1.00mm thick MS flate sheet cold rolled with 3 hinges of suitable size for fixing the door including two coat of synthetic enamel OG/black/ white/Blue/Grey/Smokey Grey paint (Make-Asian/Berger) over a coat of primer on internal & external surface by using spray gun. complete all as specified in drawing and directed by Engr-in-charge.

(a) Door with complete fitting

(c ) Bottom

(d) Right/Left Sides

(e) Back Sides

(f) Legs (fix by gas welding)

(g) Cleat for fixing shelf

(h) Shelf

Removing old unserviceable parts of Teapoy Verandah and S&F New parts of 20 sqmm conduit pipe with gas welding and M&L for two coat of synthetic enamel white paint (Make-Asian/Berger) over a coat of primer. Complete all as specified in drawing and as directed by Engr-in-charge.

(a) Long rail

(b) Short rail

Removing old unserviceable cane from Chair Verandah and M&L for one coat of white paint and recanning with 4mm wide cream/white coloured half round plastic cane. Complete all as specified in drawing and as directed by Engr-in-charge.

Supply & replacement of broken parts of wooden furniture by 1st class hard wood (TW) duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints if any including apply two coats of Touchwood polish (Asian/Berger) after preparation of surface using of sand paper after aplying two coat of wood filler Complete all as specified & shown on drawing and as directed by Engr-in-charge for Chair dining.

(A) Front leg

(B) Rear leg

(C) Side rail with hole

(D) Front/back rail with hole

(E) Stiffener bottom

(F) Back rest

All as per item no 1 above but for Chair Writing.

(A) Front leg

(B) Rear leg

(C) Side rail with hole

(D) Front/back rail with hole

(E) Stiffener bottom

(F) Back rest

(G) Hand rest

All as per item no 1 above but for Chair easy.

(A) Front leg

(B) Rear leg

(C) Side rail with hole

(D) Front/back rail with hole

(E) Stiffener bottom

(F) Complete Back frame with hole

(G) Hand rest

All as per item no 1 above but for Chair Dining Officer

(A) Front leg

(B) Rear leg

(C) Side rail

(D) Front/back rail

(E) Stiffener bottom

(F) Back rest

All as per item no 1 above but for Sofa set 4/5 seater

Front leg

Rear leg

Side rail

Front /Back Rail

Stiffener seat

Stiffener Back frame

Hand rest

All as per item No 1 above but for Table Centre/2 tier.

(A) Legs

(B) Long rail

(C) short rail

All as per item no 1 above but for Peg Table.

(A) Legs

(B) Long rail

(C) short rail

All as per item no 1 above but for Teapoy wooden.

(A) Legs

(B) Long rail

(C) short rail

(D) Stiffener

All as per item no 1 above but for Table 3X2 without drawer.

(A) Legs

(B) Long rail

(C) short rail

All as per item no 1 above but for Table 3X2 with drawer.

(A) Legs

(B) Long rail

(D) Drawer with knob

(C) short rail

All as per item no 1 above but for Table dining 6/8 person.

(A) Legs

(B) Long rail

(C) short rail

Supply and fixing of broken parts of Table writing by 18/19 mm thick commercial block board with 1 mm thick lamination sheet on one face duly finish fabricated as per existing shape and size, fixed with suitable size bamboo pins and fevicol including tightening of other joints if any complete all as per specified and shown in drawing and as directed by Engr-in-Charge:-

(A) Legs.

(B) Long rail.

(C) Short rail.

(D) Right and left side.

(E) Drawer with knob.

(F) Back Side.

(G) Shutter / Door with one CB knob, two hinges and Shelf.

(H) Long stiffener.

(J) Short stiffener.

Removing old unserviceable & broken parts of Table bed side wooden and Supply of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beading. Complete all as specified & shown on drawing and as directed by Engr-in-charge.

(B) Bottom

(C) Shelf

(D) Left/Right sides

Removing old unserviceable & broken back side of Table bed side wooden and Supply of new back side of 6mm thick comercial plywood BWR quality ISI marked. Complete all as specified.

Removing old unserviceable plastic cane and Recanning of furniture with 2mm wide half-round cream/white colour plastic cane & 4 mm wide cane for closing the holes including removing old cane complete M&L for one coat of french poloishing on vesual surface as specified and shown on drawing.

(A) Chair dinning

(B) Chair writing

(C) Chair easy

(D) Stool dressing CB

Removing old unserviceable parts of Table dressing gents and S&F new parts of 18mm commercial block board BWR quality ISI marked laminated with 1mm thick lamination sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror.Complete all as specified & directed by Engr-in-charge.

(A) Top/ Bottom

(B) Sides

(C) Drawer with knob

(D) Looking mirror (Make- Atul/Modiguard)

(E) Back frame

(F) Back ply of mirror

(G) Hanging Clips

(H) Back ply of box

Removing old unserviceable parts of Table dressing ladies and S&F new parts of 18mm commercial block board BWR quality ISI marked laminated with 1mm thick lamination sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror.Complete all as specified & directed by Engr-in-charge.

(A) Top/ Bottom

(B) Sides

(C) Drawer with knob

(D) Looking mirror (Make- Atul/Modiguard)

(E) Back frame

(F) Back ply of mirror

(G) Sliding mirror

(H) Aluminium chennal for sliding mirror

(J) Back ply of box

Removing old unserviceable parts of Hat Stand and supply and fixing new parts of 19mm thick particle board. 1.5 mm thick prelaminated teak face sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror complete all as specified and directed by Engr-in-Charge:-

(A) Looking mirror (Make - Atul / Modiguard).

(B) Back frame.

(C) Back ply of mirror.

(D) Hanging clips (Brass).

(E) Clamps 4 nos as per sample.

Supply and fixing broken parts of bed hard by 2nd class hard wood duly finish fabricated as per existing shape and size fixed with suitable size bamboo pins and fevicol including tightening of other joints if any complete all as per specified in drawing and as directed by Engr-in-Charge:-

(A) Head rest complete.

(B) Foot rest complete.

(C) Long rail.

(D) Short rail.

(E) Support between two long rail.

Removing of old unserviceable plywood from bed hard, supply and fixing new plywood 12mm thick commercial on other face BWR quality ISI fixed with suitable size of screw complete all as specified and directed by Engr-in-Charge. Make of Plywood :- Kitply

Removing old unserviceable/missing hard pvc shoe from all types of wooden furniture articles and S&F new hard PVC shoe.Complete all as specified & shown on drawing and as directed by Engr-in-charge.

Preparation of old polished wooden surface, cleaning and dusting whenever required including removing and minor repair and Material and labour for applying two coat of touchwood polish (Asian/Berger) on Visual surfaces. Complete all as specified and directed for:

(A) Binsoiled linen small/large

(B) Bed hard

(C) Chair writing

(D) Chair dinnig

(E) Chair dining officer

(F) Chair easy

(G) Teapoy wooden

(H) Table 3 x 2 with/without draweer wooden

(J) Table dinning 6/8 persons

(K) Peg table

(L) Side board

(M) Sofa set 4/5 seater wooden

(N) Stool dressing CB

(O) Table centre / Table centre 2 tier

(P) Table dressing gents with mirror

(Q) Table dressing ladies with mirror

(R) Table writing

(S) Hat stand with mirror

(T) Chair WB

Removing old unserviceable top of following furniture articles and S&F of new top of 18mm thick prelaminated MDF board ISI marked phenol formaldehyde bonded including 6mm beading of 1st class hard wood (teak wood) all around the top complete all as specified in drawing and as directed by Engr-in-charge.

(A) Table centre/ 2 tier

(B) Table dining 6 person

(D) Teapoy wooden

(E) Peg table

(E) Table writing

(F) Table 3x2 with/witout drawer

Supply and fixing of wooden brackets triangular shaped and size 75X75mm of 1st class Teak wood and fixed to wooden Chairs by using screws & adhesive complete all as specified & directed by Engr-in-Charge.

Supply and replacement of Cushion foam for sofa set 32 density of size 22"x21"x4" thick with Tapastry cloth cover Not less then Rs 200 per meter.

M/s Ramdev Jangid

Shri Gajanand Enterprises