PROVISION OF STORAGE SHED (30MX12M) FOR FURNITURE BSO YARD AT MES OFFICE, (20MX15M) AT DRC AND CONSTRUCTION OF TRG INFRA AT TRG GROUND WITH QTY 02 CPL UNDER AGE (I) AYODHYA CANTT.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil, complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in soft/loose soil complete all as specified & directed.

Returning filling in with approved excavated soil including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified & directed.

Removal of excavated material to a distence n.exc 50mtr and depositing where directed at a level nexc 1.5mtr aboev the starting point complete all as specified & directed.

M&L brick work with old size fly ash brick on straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified & directed.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in CM (1:4) with mixing of water proofing compound as per manufacturer's instructions & finishing the surface even and smooth without using extra cement, complete all as specified & directed. Note:-WPC shall be measured & paid seperately under relevent item of work.

M&L for rendering 15mm thick cement plaster on other than fair faces of brick work or stone wall surfaces in CM (1:6) & finishing the surface even and smooth without using extra cement, complete all as specified & directed.

M&L for prepararion of new plastered surfaces of wall and applying two coats of cement base paints over a coat of alkali resistant primer complete all as specified.

M&L for prepararion of new plastered surfaces of wall and applying three coats of white wash on internal wall surfaces, complete all as specified.

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified.

S&F MS work in tubular truses / purlin rafter post plate etc including ERW or induction butt welded tube conforming to IS-1161-1979 Gde S-240 complete all as specified.

S&F MS framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting etc of Fe-410 Gde 250-A, complete all as specified.

S&F mild steel screw bolts (machine made)11 to 15mm dia with hexagonal or square head at one ends and screwed the other ends, or screwed both ends to be fitted with washer and one hexagonal screwed nuts, exc 5cm but n.exc 150cm long complete all as specified.

M&L Pre Painted galvalume alumunium Zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall fixed with shelf tapping screws complete all as specified.

M &L Pre Painted galvalume alumunium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall fixed with shelf tapping screws complete all as specified.

M&L for cement concrete work in pavement/hardstanding of flexural strength 40 kg/sqcm in field using 400 kg of cement per cum thickness of concrete 25 cm or less complete all as specified and directed.

S & F mild steel work in framed work as in doors or gates of angle or other sections, with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging or sliding with and including either hooks and hingesor steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Gde Fe 290(Gde E-165), complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including painting with one shop coat of zinc chromate primer, complete all as specified and directed.

Description all as per item No-18 above but without glazing bars.

S & F Sheet glass ordinary quality, 4mm thick, glazing with oil putty in squares not exceeding 0.50Sqm in each pane, complete all as specified and as directed.

S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

M & L for preparation of steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and two parts of sand by weight complete all as specified.

M&L sand filling under floor or in foundation including watering and consolidation complete all as specified.

M&L hardcore of broken stone/boulders of gauge n exc 63mm deposited spreed and leveled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

M&L screed bed or bedding layer of mortar (1:6) 15mm thick finished even & fair for laying floor finishers, complete all as specified and directed.

M&L plaster or backing coat of mortar (1:3) 10mm thick finished even & rough for fixing wall finishes, complete all as specified and directed..

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for RCC M-25(design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engineer-in-Charge.

M&L for RCC M-25(design mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed

M&L for RCC M-25(design mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for M-25(design mix) using 20mm graded crushed stone aggregate as chajjas, complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, basis of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to better with rough finished surfaces of concrete, complete all as specified & directed.

M&L for Formworkof pillars, posts, struts piers, columns and stanchions and similar works for rough finished surface of concrete complete all as specified & directed.

Formwork to sides and soffits of floor or roof beams, girders, bressummers,lintels etc for rough finished surface of concrete complete all as specified & directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified & directed.

M&L for TMT bars, 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia or securing with clips, complete all as specified & directed.

M&L for TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia or securing with clips, complete all as specified & directed.

M&L Treating the back fill in contact with foundation with ATT @ 7.50 ltrs of emulsion per sqm of vertical surfaces complete all as specified.

M&L Treating the top surface of filled earth with ATT @ 5.00 ltrs of emulsion per sqm of surfaces complete all as specified.

M&L Treating the soil under plinth protection with ATT @ 5.00 ltrs of emulsion per sqm of surface area complete all as specified.

M&L for heavy duty cement concrete tiles of size 400x400mmx10mm thick set & jointed in neat cement slurry in floors and pointed with grey cement & no pigment laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade ‘A’, complete all as specified and directed.

Excavation in post holes each not exceeding 0.5 cum getting out, returning, filling in, including spreading, leveling, watering and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, in soft/loose soil, complete all as specified.

M&L Plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified.

Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connected plate confirming to Fe 410-W(Gde E-250), quality 'A' complete all as specified.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

Supply only integral water proofing compound, complete all as specified. Note:- Mixing of WPC shall be done as per manufacturer's instruction & same are inclussive in respctive item of work and no extra payment will be admissible for the same.

M&L for RCC nominal mix 1:2:4, type, B-0 (using 12.5mm graded crushed stone aggregate), as in slab supported on walls, columns in floors, roofs, landings, balconies and in shelves, complete all as specified.

M&L for 75mm thick PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

M&L for Machine pressed precast concrete (rubberised form) colour interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, pointed with grey cement and pigments, as in path etc. complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete complete all as specified and directed.

M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified.

Preparation of new plaster surface of wall including cornices pilaster etc, and applying two coats of oil bound distemper over and including 1-2mm thick wall care putty, complete as specified and directed.

Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two or more coats of Acrylic smooth exterior paint of required shade @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm, complete as specified and directed.

RCC M-25(design mix) using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

100mm thick plain cement concrete 1:2:4 type B-2 (40mm graded crushed stone aggregate) as in path/hardstanding etc & finished the surface even & fair, complete all as specified.

M&L for forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade ‘A’, for 100 thick cement concrete slab, complete all as specified and directed.

Plain cement Concrete 1:2:4 type-B1 (using 20mm graded crushed stone aggregate) as in edging of paver block, copings, hold fasts plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work,complete all as specified.

Dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- (i).Dry fine sand of best available quality shall be used. (ii).Punned thickness shall be made and paid.

Supply laying jointing and testing LT XLPE and PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 2 core complete all as specified

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Point wiring with 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable in and including 20mm dia medium grade rigid non metallic PVC concealed conduit in wall after cutting chases in wall including 1.25mm thick MS pressed steel terminal box covered with and including 3mm thick laminated sheet top cover fixed flush with wall using brass screws, washers and 1.5 Sqmm single core FRLS PVC insulated sheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly with all requisite accessories such as PVC elbow, Tee, collars, bends etc. for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light / fan point controlled by one way switch 6 Amp complete all as specified.

One 3 pin socket outlet 6 amp on same board complete all as specified.

One 3 pin socket outlet 6 amp independent board complete all as specified.

Description all as per srl item No 67 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Switch piano flush type 16 Amp single pole one way, (ISI marked), complete all as speciied.

Socket outlet multipurpose combination 2 in 1, 3 pin, 6 Amp flush type, complete all as specifed.

Socket outlet multipurpose combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal,complete all as specifed.

Ceiling rose, 3 phase PVC/poly carbonate, insulated body with colour ring for fan point wiring, compete all as specified.

Sub main wiring with single core cable 2 x 6 sq mm FRLSH insulated unsheathed flexible copper conductor cable 1100 Volts grade drawn through including drawing in concealed conduit 20mm PVC conduct medium grade with cutting chases alongwith 1x 6 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly and making incoming / outgoing electric connections by using required size copper lugs / thimbles, making good to disturbed surface to match with existing surface, complete all as specified and directed. Note:-2 wire of 6sqmm, 1 wire of 6 sqmm and one run of pvc conduit shall be measured as one unit.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

MCB single pole & neutral 40-63 amps 240 volts 10 KA 'C' series fixed, complete all as specified.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series, complete all as specified.

Supply and fixing wall mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

LED street light fittings 35/36 Watt made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass / PC cover having seperate driver compartment with IP65 protection and impact resistance of IK07 complete with hosing with all accessories pre wired with and making connection with copper flexible cable of suitable size to light fitting fixed, complete all as specified and directed.

Exhaust fan 300 mm sweep AC single phase 230 V Metallic steel body Range complete with blades, frames, and louvers including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan including testing on completion, complete all as specified & directed.

Supply & Fixing ceiling fan 1200 mm sweep, 6.00 BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 Nos. blades, 30 cm long down rod, 2 Nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed.

Stepped type electronic fan regulator flush type fixed on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified.

M&L for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50Mtrs below ground level) connected to GI wire 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt in alternate layers of 150mm the, PCC chamber using PCC(1:3:6) type C-1 using 20mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally up to 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on Electrical plate No.3 of SSR Part-I (2009) and connected to earth test point incl contd to item No-83.01

testing and marking Bldg Nos and writing Test Results (in white) on a black painted M.S. Plate (size 300x300x3mm th) duly welded with angle iron of size 40X40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed. Note :- (i) GI wire and GI pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing. (ii) Excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) The rates quoted by the contractor are deemed to be included for MS sheet of size 300x300x3mm th, fixed with necessary nuts and bolts on angle iron of size 40X40x5mm, 60cm long and grouted with PCC block of size 200x200x250mm(PCC 1:3:6 using 20mm grade stone aggregate including necessary earth work for marking the result and purpose.

M/S CHANDRIKA PRASAD AND SONS (BID ID -3069076)

Channa Brothers and Co. (BID ID -3065698)

M/S A P CONSTRUCTION (BID ID -3064282)

SHIV SHANKAR MISHRA (BID ID -3068877)

DEORA ELECTRIC WORKS (BID ID -3078942)