Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC PLOT NO 223 INDUSTRIAL AREA PHASE 2 PANCHKULA 134109 HARYANA | PANCHKULA | PANCHKULA | HARYANA | 134109 | L1 | Accepted-AOC Low | |
| 2 | L2₹42.2 L+₹2.8 L (7.15%)Rejected-AOC | L2 | Rejected-AOC High | |
| 3 | L3₹46.1 L+₹6.8 L (17.2%)Rejected-AOC | L3 | Rejected-AOC High | |
| 4 | L4₹60.0 L+₹20.6 L (52.4%)Rejected-AOC | L4 | Rejected-AOC High |
Tender Value
₹65 L
EMD Value
₹1.2 L
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Sachin Jasiwal, IDSE, CWE Chandimandir
HQ CWE Chandimandir
CA NO. CWE/CHM-22/2023-24 REPAIR AND MAINT OF BLDGS OF JCOS/ OR MD ACCN IN SECTOR D AND F QTRS UNDER AGE BR-I AT CHANDIMANDIR
2023_MES_597170_1
CWE/CHM-22/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
HQ CWE Chandimandir
Class C category a(i)
8 documents required · 8 mandatory
₹1,000
Yes
GE Chandimandir
₹1.2 L
Yes
29 Aug 2023
20 May 2023
3 Jul 2023
20 May 2023
28 Jun 2023
14 Jun 2023
22 May 2023 - 27 May 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
Material & labour for Joint free coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade over and incl 10 mm screed bed or bedding in CM 1:4 complete all as specifed and as directed.
Material & labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ractangular ) joint free tiles, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match the shade over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed
Material & labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ractangular ) joint free tiles, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed
Material & labour for 16 mm thick, baroda green marble, in replacement machine cut laid over & including 15mm thick average thickness in cement mortar (1:4) bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing (table rubbed and polished), as in on kitchen plateform, stair steps and like complete all as specified and directed.
Material & labour for Rendering 20mm thick cement plaster in CM 1:4 on brick or concrete surface of roof with mixing of WPC @3% by wt. of cement (WPC will be paid separately) finished fair and even without using extra cement complete all as specifed and as directed
Material & labour for Rendering 15mm thick cement plaster in CM 1:4 on brick or concrete surface on wall finished even and fair without using extra cement incl taking down existing plaster complete all as specifed and as directed
Material & labour for Rendering 10mm thick cement plaster in CM 1:6 on brick or concrete surface of wall finished even and smooth without using extra cement incl taking down existing plaster complete all as specifed and as directed
Material & labour for Rendering 5 mm thick cement plaster in CM 1:3 on brick or concrete surface of ceiling finished even and smooth without using extra cement complete incl taking down existing plaster all as specifed and as directed
Material & labour for preperation of new surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Material & labour for Preparing new plastered surfaces and appling wall care putty of 2-3mm thick incl smoothening the surfaces with sand papers etc, and applying two coats of OBD over a coat of white wall primer on wall surfaces complete all as specified and directed.
Material & labour for Preparing of old plastered or unplastered surfaces and applying two coat of distemper oil emulsion complete all as specified and directed.
Material & labour for Preparing of old plastered or unplastered surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.
Material & labour for Complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including kitchen chimneys complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2.0 Sqm each complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter) and removing from site, n exc 1.50 Sqm each complete all as specified and directed.
All as per item, No 18 above but exc 1.5 Sqm and n exc 4 Sqm complete all as specified and directed.
Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Complete all as specified as per Manufacturer broucher.MAKE: RAJSHREE,SINTAX,ECOCELL OR EQUIVALENT as approved by GE
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative typecoloured flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
Supply and fixing 125mmx60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of cement concrete 1:3:6 type C1 in frame complete all as specified and as directed.
Supply and fixing 105 x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of cement concrete 1:3:6 type C1 in frame complete all as specified and as directed.
Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing 35 mm Plain framed, panelled shutter (two panel) 2nd class HW rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fixing 2nd class hard wood 35mm thick glazed and skelton shutter open rebated and prepared to receive glass, gauge etc (with sash bars) for edge of farming plane chamfered or rounded fitted without and mitered beed for scrwing glass etc. size of members of shutters as specified in SSR Pt-I sec 8 Clause 8.23 (a) fitted to chowkat complete all as specifed and directed.
Supply and fixing in repair factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer complete all as specified and directed.
Supply and fixing in repair factory made steel windows (Box type) w/o glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer complete all as specified & directed.
Supply and fixing in repair steel ventilator (Box type) factory made fixed type including a shop coat of red oxide primer complete all as specified and directed.
Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed
Supply and fixing 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed
Supply and fixing 3mm thick figured glass pin head type and glazing with oil putty of beading in wooden/ PVC/steel frame in squares n exc 0.5 sq. m in each panes complete all as specified and directed.
Supply and fixing in repairs 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed
Supply and fixing 3 mm thick acrylic plastic sheet, transparent , cut to size, fixed in steel window as glazing, including MS glass pin & glazing putty for fixing complete all as specified and directed by engineer-in-charge
Material & labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.
Supply and fixing 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specifed and as directed
Supply and fixing 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and tow on staple plate and fixed complete all as specifed and as directed
Supply and fixing 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifed and as directed
Supply and fixing butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100 mm complete all as specifed and as directed
Supply and fixing 300 mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete fixed as in repair complete all as specifed and as directed
Material & labour for two coats synthetic enamelled paint incl preparation of new surface of steel of any description over 10cm width or girth over a coal as red oxide primer complete all as specifed and as directed
Material & labour for painting of new wood based surfaces two coat of synthetic enamel paint on wooden surface of any description over 10 cm in width or girth over a coat of primer including preparation of new surfaces complete all as specifed and directed.
Material & labour for preparation of old wooden surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and as directed
Material and labour for brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992, old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete incl dismantling old brick work all as specified & directed.
Material & labour for PCC 1:7:12 type E2 with 40 mm broken brick aggregate as in sunken floor complete all as specified and as directed.
Water proofing treatment to sunken portion and adjoining walls of kitchen, WC & Bath etc : 15mm thick plaster in cement mortar (1:3) after roughning and cleaning the surfaces mixed with WP compound as per manufacturer instructions shall be provided on sunkenportion whle the concrete is green (a) Apply cement slurry to the surfaces @ 0.488 Kg/Sq m of cement mixed with Acrylic based polymer modified cementious composite compound @00.253 Kg//Sqm and the surface will be allowed to air cure for 4 Hours. (b) Apply another layer of cement slurry @ 0.242 Kg/Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @0.126 Kg/Sqm and the surface will be allowed to air cre for 4 hrs. (c) Curing to sunken portion with water minimum 48 hrs by ponding. (d) Paste one layer of 3mm thick APP membrane with bitumen by torch application to the treated sunken surfaces. (e). Joints/traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified.
Repairs to leaking joints of CI pipes/ traps/ fittings etc after taking out old jointing material lead / cement, cleaning the joint thoroughly and filling new material Drip seal/ lead / cement and sealing the joints with joint sealing compound (Dr Fixit or equivalent) and making the installation completely leak proof complete all as specifed and as directed Note : (i) The work pertains to the trap/drain pipes/ fittings of the WC / bath of MAP quarters installed under side of the roofs. (ii) All the joints of pipes / traps / fittings of one WC / bath shall be measured as one unit and payment shall be made for each WC / bath as “Each Job”. (iii) The rates shall include for providing scaffolding etc as required.
Material & labour for RCC 1:2:4 type B-1 (using 20mm stone agg) as in slabs supported on walls, beams and columns as in floors, roofs, landings, balconies, canopies, deck slabs, kitcheb slab and in cupboard shelves and the like incl necessary form work complete all as specified and as directed.
Supply and fixing in repair TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material & labour for solid PVC board 20-22 mm thick (ISI marked), interior grade white or coloured fixed with screws in kitchen cupboards, shutters incl dismantling old boarding complete all as specified and directed
Material & labour for 19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in kitchen cabinet and cup board/ wardrobe shelf with 6mm thick IInd class hard wood edging on exposed edges, fixed as in repair complete all as specified and directed.
Material and labour for piano hinges, mild steel bright finish, width of flap 40mm when open, fixed as in repair complete all as specified and directed.
Supply and fixing in repair PVC body magnetic catchers for use in cup boards of kitchen, ward robes, complete all as specified.
Supply and fixing in repair vitreous china wash basin white flat back size 550 x 400mm including bracket waste coupling and waste pipe complete all as specified and as directed.
Supply and fixing in repairs Wash down water closet (Pedestal pattern), complete including PVC seat cover and CP jet complete all as specified and as directed.
Supply and fixing in repair vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement as in repair complete all as specified and as directed.
Supply and fixing in repair Bib taps cast copper alloy with crutch or butter fly handle of bore 15mm, chromium plated complete all as specified and as directed.
Supply and fixing in repair of 15mm Angular Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fancy type chromium plated, complete all as specified and as directed.
Supply and fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Supply and fixing in repair central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed.
Supply and fixing in repair 15mm CP brass fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
Supply and fixing in repair chromium plated, fancy type shower rose with swivel joints 75mm dia with CP arm and fixing to steel pipe 15mm bore fixed as in repair complete all as specified and directed.
Supply and fixing in repair wall Mixer, for mixing hot & cold water screwed down for iron pipe and fixed, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed.
Material and labour for PVC bath mirror cabinet of size 622mm x 422mm fixed to wall with rawl plugs having arrangements to put inside toiletries as in repair complete all as specified and as directed.
Material and labour for sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915mm x 460mm, bowl size 410mm x330mm x160mm incl cantilever brackets and connection to union, pipe, fixed as in repairs complete all as specified and directed.
Material and labour for 900mmx750mm plate rack made out of 1.00m thick stainless steel sheet with steel shelves and hanging arrangement for utensil, fixed as in repair complete all as specified and directed.
Material and labour for 750mmx600mm plate rack made out of 1.00m thick stainless steel sheet with steel shelves and hanging arrangement for utensil fixed as in repair complete all as specified and directed.
Supply and fixing in repair sink mixer with swivel casted spout (wall mounted model), cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe complete all as specified and directed.
Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat/pedastal pattern etc, complete all as specified and as directed.
Supply and fixing in repair PVC, waste and vent pipe 75 mm thick in any length with or without ears with cement joints, laid in trenches or in floor or fixed to walls with clamp complete all as specified and as directed.
Supply and fixing in repair PVC, waste and vent or rain water pipe 110 mm thick in any length with or without ears with cement joints, laid in trenches or in floor or fixed to walls with clamp complete all as specified and as directed.
Supply and fixing in repair 75 mm bore PVC (SWR) bends any radius with or without access door complete all as specified and as directed.
Supply and fixing in repair 110 mm bore PVC (SWR) bends any radius with or without access door complete all as specified and as directed.
Supply and fixing in repair 15mm bore GI tubing medium grade with all fittings to walls and ceiling or laid in floors complete all as specified and as directed.
Supply and fixing in repair 20mm bore GI tubing medium grade with all fittings to walls and ceiling or laid in floors complete all as specified and as directed.
Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and making good, cutting exc 10cm but n exc 20cm girth complete all as specified and directed.
Supply and fixing in repair 500 ltr capacity Rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including PTMT float valve and tank nipple complate all as specified and directed.
Supply and fixing in repair Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed 20mm bore complate all as specified and directed.
Dismentling Brick tiles or terracing tiles, single layer on roofs complate all as specified and directed.
Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in padding on RCC roof finished fair and even includind demolition of existing PCC complete all as specified and directed.
Material and labour for Preparation and cleaning surfaces of concrete/plaster incl flashing and junction of parapets etc and applying APP based polymeric memberane min wt 3 kg/sm and min 3 mm thick reinforced with non woven fabric with torch application over and including a coat of oil base bituminous primer incl taking down old membrane complete all as specified and as directed
Material & labour for Cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm screed in CM 1:6 complete all as specified and as directed.
Material & labour for applying one coat of bitumenous aluminum paint over APP membrane complete all as specified and directed.
Material and labour for PCC 1:2:4 type Type B0 (using 12.5 mm graded crushed stone aggregate) as in roof kerbs mud stops and similar work complete all as specified and directed.
Supply only Integral waterproofing compound complete all as specified and as directed.
Material and Labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.
Material and labour for 40 mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in flooring, finished fair and even without using extra cement including finishing surface by brooming complete all as specified and directed.
Material and labour for machine pressed precast conctete interlocking paver block any shape and size with grey cement nad no pigment, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade (with gray cement & pigment) over and including 25 mm thick sand cushioning complete all as specified and as directed .
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Dismantling barbed wire as in fencing fixed with clips etc. complete all as specified and directed.
Material and labour for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in hard/dence soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed .
Material & labour for mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complate all as specified and directed.
Supply and fixing mild steel screw bolts ( machine made ) with hexagonal or square heads at one end & screwed the other , or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nuts for 5 to 8 mm neck dia and length exc. 5 Cm and n.exc. 10 Cm complete all as specified and directed.
Material & labour for Mild steel round bars 10mm dia and over, cut to length, as fixed in chain link fencing along tha length as required complate all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.
Supply only PVC coated GI chain link fencing of any type and size of dia n.exc 4.00 mm PVC coated galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item No 98 above (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.
Material & labour for two coats synthetic enamelled paint incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed
M/s Om parkash
Gunjan and Gunjan Associates
Standard Const. Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .