REPAIRS/REPLACEMENT OF OLD NON LED FITTINGS INTO LED FITTINGS AND INTERNAL ELECTRIFICATION AND ITS CONNECTED WORKS AT SFC UNIT AND THEIR MD ACCN UNDER AGE E/M (SOUTH) OF GE (SOUTH) SECUNDERABAD

Amount

Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area complete all as specified and as directed

Taking down existing unserviceable light fittings,security light fittings,bulk head fittings,fall ceiling light fittings etc. from any height of buildingcomplete all as specified and as directed

Taking down existing unserviceable MCB's/MCCB's/Distribution boards any capacity complete all as specified and as directed

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc for one light point controlled by one switch complete all as specified and as directed.

All as per Sl item No 4 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator complete all as specified and as directed

All as per item No 4 here-in-above, but for One 5 Amps socket outlet point on the independent board complete all as specified and as directed

All as per item No 4 here-in-above, but for One 5 Amps socket outlet point on the same board complete all as specified and as directed

All as per item No 4 here-in-above, but for One Bell point controlled by one, bell push complete all as specified and as directed

All as per item No 4 here-in-above, but for One light point controlled by two way switch complete all as specified and as directed

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked , 20 mm bore with conduit accessories for Concealled wiring mount on wall or fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness including back plate and cover plate for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch. Note: for Item Sl No-04 to 17 :- (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

All as per item No 10 here-in-above, but for One ceiling fan/exhaust fan point controlled by one switch through regulator

All as per item No 10 here-in-above, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per item No 10 here-in-above, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item No 10 here-in-above, but for One Bell point controlled by one, one way switch 5 amps, SP complete all as specified and as directed

All as per item No 10 here-in-above, but for One light point controlled by two 2 - w a y s w i t c h 5 amps, SP complete all as specified and as directed

M & L for Point wiring complete with two runs of 2.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint flush to wall for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw ,cup washer etc. complete concealed in walls and provn of 2.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. for one light point controlled by one switch complete all as specified and as directed.

All as per item No.16 here-in-above, but for using 4 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 4 Sq mm copper conductor PVC insulated cable as earth continuity conductor complete all as specified and as directed

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new PVC casing caping, ISI marked, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point and fan point controlled by one switch. Note: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth.

All as per Sl item No.18 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per item No.16 here-in-above, but for One 3 pin 5 Amps switch socket outlet same board complete all as specified and as directed.

All as per item No.16 here-in-above, but for One Bell point controlled by one, bell push complete all as specified and as directed

All as per item No.16 here-in-above, but for One light point controlled by two 2 - w a y s w i t c h 5 amps, SP complete all as specified and as directed

All as per item No.16 here-in-above, but point wiring of 2.5 Sqmm complete all as specified and as directed

S & F switch piano single pole flush type 5 amps, 230 volts. complete all as specified and as directed

S & F switch piano single pole flush type 15 amps, 230 volts.complete all as specified and as directed

S & F single pole Modular switch 1 way 6 Amps, 1 Module complete all as specified and as directed

S & F single pole Modular switch 1 way 16 Amps, 1 Module complete all as specified and as directed

S & F Switch piano two way flush type 5 Amps capacity 230 volts complete all as specified and as directed

S & F Modular switch 2 way 6 Amps, 1 Module complete all as specified and as directed

S & F bell push 5 A flush type complete all as specified and as directed

S & F Modular Bell Push 6A, 1 Module complete all as specified and as directed

S & F Socket modular type multipurpose 2/3 Pin, 6 amps, 230 volts 2 Module complete all as specified and as directed

S & F Socket modular type multipurpose 3/6 Pin, 6/16 amps, 230 volts 2 Module complete all as specified and as directed

S & F Socket flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as specified and as directed

S & F Socket flush type multipurpose 2 in 1, 3/6 Pin, 5/15 amps, 230 volts complete all as specified and as directed

S & F Switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Voltscomplete all as specified and as directed

S & F Switch socket combination 5 in 1 multipurpose 3/5 pin 5/15 amps flush typewith complete all as specified and as directed

S & F Modular ceiling fan regulator stepped socket size, 2 module suitable to work on 230 volts complete all as specified, complete all as specified and as directed

S & F Modular ceiling fan regulator stepped socket size, 1 module suitable to work on 230 volts complete all as specified, complete all as specified and as directed

S & F Electronic type fan regulator stepped socket type, suitable to work on 230 volts complete all as specified and as directed

S&F bell (buzzer/ding dong) working on 230 volts AC Supply complete all as specified and as directed.

S & F lamp holder suitable for B-22 base lamps insulated body surface bakelite with back plate suitable for angle / batten fittings complete includinf LED Bulb 12 watts, B-22 base complete all as specified and as directed

S & F In replacement of old unserviceable light fittings LED tube light fitting 1x20 Watt industrial batten patti type with bipin holders connector block complete with all accessories internally prewired and incl connecting up two core wire incl 01 no. 20 watt retrofit to be fixed at any height of wall/ceiling complete all as spd and directed. Make :- Havells Cat No.-LUMILINEOBS20WLED865SPCWH, Bajaj Cat No- BCLSB 20W WH, Crompton Cat No. LCTLN-20-CDL Note :- (1) Burning hours of light fittings shell not be less than 50,000 Hrs, contractor has to submitt Tech Data Sheet (TDS) before sampal approval. (2) Lenght of terminal wire shall not be less than 300 mm long.

S & F In replacement of old unserviceable light fittings LED tube light fitting Integral 9/10watts LED Tube light fitting internally prewired and incl connecting up with two core wire od suitable size complete all as specified and as directed Make : Havells Cat No.-LUMILINEBS10WLED865SPCWH, Bajaj Cat No- BCLSB10W WH, Crompton Cat No. LCTLN-10-CDL

S & F In replacement of old unserviceable light fittings with new LED tube light fitting box type including 20/22watts LED Tube rod, polycarbonate, prewired and incl connecting up with two core wire of suitable size complete all as specified and as directed Make : Crompton Cat No-IGP161LT8-16 and LT8-20-865-(2), Bajaj Cat No. BLRB-DB 118 and BLRB 20 CW LED., Havells Cat No-REGALBATTENT8UPTO1X22W SSBSWHNW and PHOTONULTRAE2.01213T8SSTL20W LED865SPC

S & F In replacement of old unserviceable bulk head light fittings with new LED bulk head ip 65 with prismatic diffuser 1x10 Watt white complete with all accessories internally prewired and incl connecting up three core single wire complete all as specified and as directed Make : Bajaj cat part No. BIBWP 10W LED, Crompto Cat No-LBHP-10-CDL, Havells Cat No-EXAFT10WLED857SSYMBOPC

Supply and fix in replacement Retrofit T8 tube Polycarbonate 4 feet 20 W LED Rod , 240 volt Make : Havells Cat No. PHOTONULTRAE2.01213T8SSTL20WLED865SPC, Crompton Cat No.LTT8-20, Bajaj Cat No. BLRB 20 CW LED.

S & F In replacement of old unserviceable Building security light fitting versatile pressure die-cast aluminium with high power LED 25 W as light source complete with LED 25 W 5000K including brackets made out of GI pipe 25 mm dia light grade pipe bent to shape incl 02 Nos MS flate clamps incl nut bolts connection complete all as specified and as directed Make : Bajaj cat part No. ENXT P 24L WH CR PC SD, Crompto Cat No-LSTS-25-CDL-M, Havells Cat No-ENDURASUNDOWNSL25WLED 765PASYBOPCIHD.

S & F in replacement of old unserviceable LED Flood light fitting 50 watt capacity with SMD LED pressure die-cast aluminium housing with reflactor including making electrical connection from ceiling rose to light fitting complete all as specified and as directed Make:- Crompton Cat No-CFS-504-50-57-60D-SL-GL-NSG, Eveready Cat No-LEDFL05015-04, Wipro Cat No-D915065. Note :- The Quoted rate is deemed to be included for installation of light fitting at any height including necessary T & P and safety equipments.

Supply and fix LED PLL of capacity 18 watts, 4 pin in replacement of existing 2'x2' CFL light fitting from false ceiling at any height including making necessary electric connection in existing CFL lighting complete all as specified and as directed Makes:- Surya Cat No. SLE 18W PLL Havells CAt No. PHOTONUTRAPLL419TL18WLED865SPC. or equivalent in /Bajaj/Philips

S & F in replacement LED bed side lamp 6 watt fixed on existing wall including making electrical connection complete all as specified and as directed. Syska cat No. SSK-TRS-6W or any equivalent model in C&S/Philips/Wipro./Havells

S & F in replacement of old unserviceable recesss mounting light fitting 1' x 1' of capacity 18 Watts powder coated white CRCA full glow suitable for 300 300 mm POP false ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed Makes:- Crompton Cat No- LCTLRNE-18-CDL(1X1), Syska Cat No-SSK-PPL-22W, Havells Cat No-BOCR1X1R18W LED857SPCMS

S & F in replacement of old unserviceable surface mounting light fitting 1' x 1' of capacity 18 Watts powder coated white CRCA full glow suitable for ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed Mak:- Crompton Cat No- LCTLSNE-18-FO-CDL, Syska Cat No-SSK-PSP-22W, Havells Cat No-BOCR1X1R18WLED857SPCSS

S & F in replacement of old unserviceable recess mounting round light fitting of capacity 15 Watts powder coated white CRCA full glow suitable for ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed Make:- Crompton Cat No- LSCRM-15W-CDL, Syska Cat No-SSK-TPL-15W, Havells Cat No-EDGEPRONEORDDLR15WLED865S

S & F in replacement of old unserviceable recesss mounting light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow suitable for 600 x600 mm POP false ceiling including making electrical connection from ceiling rose to light fittinf complete all as specified and as directed Make:- Crompton Cat No- LCTLRNE-36-FO-CDL, Havells Cat No. PLANO2X2PLR36WLED865S, Bajaj Cat No-BCTBLR 36W LED FP CW

S & F in replacement of old unserviceable surface mounting light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow suitable for ceiling including making electrical connection from ceiling rose to light fittinf complete all as specified and as directed Make:-Crompton Cat No- LCTLSNE-36-FO-CDL, Havells Cat Np. PLUTONEO2X2PLR34WLED857S, Bajaj Cat No-BZSSQL 36W LED WH i

S & F MCB SP 6 to 32 Amps 240 volts C- type complete all as specified and as directed

S & F MCB SPN 40 to 63 Amps 240 volts C- type complete all as specified and as directed

S & F MCB TPN, 415 volts suitable for fixing in MCB DB of capacity 63 Amps,10 KA complete all as specified and as directed

S & F in replacement sheet metal enclosure MCB DB SPN 4 way with 100 amps rated bus bar 240 volts double door with locking system complete all as specified and as directed . Make :- Havells, Legrand, ABB

All as per Sl item No 60 here in before, but SPN 8 way DB complete all as specified and as directed

All as per Sl item No 60, here in before but SPN 12 way DB complete all as specified and as directed

S & F in replacement of TPN DB 4 way double door made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and as directed. Make :- Havells, Legrand, ABB

S & F Vertical loadline type TPN DB 4 way double door with incoming as MCCB TP 415 volts AC 3 phase 50 Hz with fixed magnetic setting for current rating of 63 Amps 16 KA ,4P made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified and as directed . Make :- Havells, Legrand, ABB

S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed Make :- Havells, Legrand, ABB

Supply and fix in replacement POWER UNIT with one 20 amps socket, (incl 3 Pin Plug Top 20 Amps) including one electronic starter 20 Amps rating and one SP MCB 20 Amps 'C' curve, all accessories shall be fixed in one six module plate and flush metal GI box and electrically connecting up fixed in repair complete all as specified and directed of Make :-Havells Cat No-DHDUCDP0253020 (20 Amps) OR any equivalent model in Legrand / ABB

S&F MCCBs 415V, 25KA, 100 amps 4 Pole suitable for DB including removing the existing unserviceable one complete all as specified and as directed Make :- Havells, Legrand, ABB

All as per Sl item No 64 here in before, but 63 Amps, 10 KA complete all as specified and as directed

M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.

All as per Item Sl No-69 above but using 3 runs of single core 6 sqmm complete all as specified and as directed

All as per Item Sl No-69 above but using 5 runs of single core 6 sqmm complete all as specified and as directed

All as per Item Sl No-69 above but using 5 runs of single core 10 sqmm using 32 mm dia PVC conduit complete all as specified and as directed

M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including PVC Casing & Caping and its accessories including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.

All as per Item Sl No-73 above but using 3 runs of single core 6 sqmm complete all as specified and as directed

All as per Item Sl No-73 above but using 5 runs of single core 6 sqmm complete all as specified and as directed

All as per Item Sl No-73 above but using 5 runs of single core 10 sqmm using 32 mm dia PVC casing caping. Note for item No 69 to item No.76 :- (1) The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth (2) The cost of cutting of chases of required width and depth for conduit incl plastering ,painting two coats to match the existing wall colour is deemed to be included in the rate quoted rate. (3) The corresponding runs of copper wire and one run of suitable size of PVC conduit / casing caping shall be measured as one running meter.

Supply and replace Electronic Driver for downlight of capacity 15/18 Watt as per site requirement complete all as specified and as directed

Supply and replace Electronic Driver for LED Light of 2X2 fitting of any capacity 36/42 Watt as per site requirement complete all as specified and as directed

M & L for removing repairing any kind of LED building security light of any wattage by replacing the defective parts,complete replacement of all LED chips,correction of LED PCB circuits in any means including soldering to make it functional and refixing it complete all as specified and as directed

Taking down carefully geysers from site of any make and capacity, transporting to MES complaint cell for dismantling the same for inspection, taking out all unserviceable and burnt spare parts, de-scaling and cleaning of tank thoroughly with washing compound or liquid solution, applying one coat of milky white synthetic enamel paint with sprayer after preparation of surface, writing work as per existing pattern with black synthetic enamel paint and re-fixing of geysers at its original position complete all as specified and directed. Note : (a) Spare part shall be measured and paid separately under respective item of this schedule, however minor items which are not catered in this schedule, the cost of the same shall be deemed to be included in the unit rate of these items. (b) Repair works will be carried out at workshop E&M complaint cell. (c) Repair of geyser shall be completed and re-fixed the same with in 72 Hrs after receipt of complaint slip. (d) The cost of transportation to workshop and back is deemed to be included in the quoted rate of this item.

M & L for repairs to copper inner tank, like denting, soldering, brazing, leak testing and reassembling of any Ltrs capacity water heater (Geyser) complete all as specified and as directed

Supply and replace Geyser element 2000 watts /1500watts of any type (Circular OR tringular) or as per site requirement complete all as specified and as directed

Supply and replace Thermostat suitable for existing geyser of any make complete all as specified and as directed

Supply and replace Indicator bulb 230 V suitable for any make and colour complete all as specified and as directed

Supply and replace PVC Cold/Hot water connection pipe 45 cms long 15 mm dia complete all as specified and as directed

S &F Bib taps chromium plated with crutch or butter fly handle 15 mm dia screwed for iron pipe or for brass ferrule and fixed including cutting of GI pipeall as specified and as directed.

Supply & fixing Brass Head Assembly having 8 to 9 holes suitable for 25 litres capacity geyser of make – Bajaj, Venus, Recold complete all as specified and directed.

Supply and fixing in replacement inner tank, ISI marked made of stainless steel suitable for 25 Litters capacity geyser complete all as specified and directed.

Supply and fixing PVC insulated round copper wire 3 core 2.5 Sqmm for making connection from storage geyser to industrial / power socket complete including removal of existing old damaged wire complete all as specified and as directed

Supply and fix Plug Top 3 pin 15 Amps for storage geyser including removal of existing plug top complete all as specified and directed. Make- Anchor, Havells, cona.

S & F Industrial type Plug top 3 pin, 20 Amps suitable for industrial socket for storage geyser including taking down old UNSV / rusted complete all as specified and as directed Make :- Havells, Legrand, ABB

Taking down ceiling fans of any type and size after disconnecting from existing ceiling rose to connector and clamp hooks and transportation to MES Complaint Cell, cleaning externally, dismantling and examining the rotor, startor, bearings, bushes, winding etc; for serviceability and repairing/replacing the defective parts subsequently oiling, greasing, assembling, testing for proper functioning, checking for safety security and proper locking, transporting back to building/site from work shop, hanging at its original position and connecting electrical connections, testing for noise free smooth running etccomplete all as specified and as directed

Taking out defective/burnt out windings of ceiling fans of various makes of size 1200 mm sweep working on 230/250 volt single phase AC supply and re-winding with supper enamelled new copper wire of appropriate gauge including varnishing with good quality varnish' baking up, reassembling the fan, testing including replacement of connector, flexible wire of size 23/0.0040 three core up to one metre complete all as specified and as directed Note :- Ceiling fans which have Re-winded shall be in guarentee period for one year, any defect noticed during defect libiality period shall be repaired and cost for the repair shall be borne by the contractor.

Taking down old unserviceable rusted ceiling fan blades and providing new ceiling fan blades with fixing new screws as appropriate shape and size suitable for ceiling fan of any make and size 1200mm sweep complete all as specified and directed. Make: Havells/Bajaj/Orient/Khaitan

supply and fix in replacement new metallic clamps (minium 03 mm thick), rubber bush, nut bolt, washer and cotter pin and for various types of ceiling fans to complete the repair work.

M & L for painting of ceiling fans along with blades of any make/model of size upto 1400mm sweep with spray paint white in colour supper enameled paint, writing MES No in 20mm letter size with black paint etc complete all as specified and as directed by Engineer- in - Charge. Note :- Painting work shall be carried out at site, contractor / his supervisor shall make necessary arrangement for spray painting at users site.

Taking out defective/worn out Ball Bearing of any make and supply and fix new bearing suitable for various makes of ceiling fans of size 1200 to 1400mm sweep complete all as specified and as directed. Make: SKF/NBC/TATA.

Taking out defective capacitor and supply and fix new capacitor of 2.5 manufactured of approved make with holding clamp for various makes of ceiling fans complete all as specified and as directed Make:-Epcos/Bhel/Universal

All as per Item No- 98 here-in-above but 3.15 manufactured complete all as specified and as directed

Taking out worn out Gun metal bush and supply and fix new Gun metal bush for various makes of ceiling fans of size 1200 to 1400mm sweep. (as per sample) complete all as specified and as directed

Taking down Canopy as approved suitable for Ceiling Fan of any sweep and make complete all as specified and as directed.

Taking out defective/burnt winding of exhaust fans of various makes of size 225 to 300mm sweep working on 230 to 250 Volt, single phase, AC supply, and rewinding with supper enameled new copper wire of appropriate gauge including varnishing with good quality varnish baking up, reassembling the fan, testing, transportation, replacement of connector, flexible copper wire of size 23/0.0040 three core up to one metre complete all as specified and as directed

All as per item No 102 here-in-above but of size 375/380mm sweep complete all as specified and as directed.

All as per item No 102 here-in- above but of size 450mm sweep complete all as specified and as directed.

S&F of fan blades suitable for 450 mm sweep exhaust fan of approriate size as per sample kept with compete all as specified and directed.

All as per item No. 102 above but size of 375/380mm sweep.complete all as specified and as directed

All as per item No. 102 above but size of 225/300mm sweep complete all as specified and as directed

Taking out defective capacitor and supply and fix new capacitor of 4.0 mfd of approved make with holding clamp for various makes of ceiling fans complete all as specified and as directed Make:-Epcos/Bhel/Universal

S&F in replacement of ceiling fan downrod of required height including drilling of holes and threads of dia 15 mm as per the site requirement as directed at site

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed

Supply and replace PVC rectangular box (Gang box) with 5 Amps switch socket complete all as specified and as directed

Supply and replace PVC rectangular box (Gang box) with 5/15 Amps switch socket complete all as specified and as directed

Supply and fix/lay GI pipe 15 mm dia med grade for protection of earth continuity conductor complete all as specified and as directed

Supply and replace Plug top 5 Amps 3 pin 250 Volts complete all as specified and as directed

Supply and replace PVC Dummy sheets circular type of 4" complete all as specified and as directed

Supply and replace PVC Dummy sheets circular type of 6" complete all as specified and as directed

S & F in replacement LED Bulb 12 Watt suitable for B22 base holder complete all as specified and as directed. Make: crompton, Havells, Bajaj

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of andings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., making good and matching with the existing colour, cutting not exc 10 cm girth complete all as specified and as directed .

S&F in replacement of flush galvanised iron sunken box, not less than 1.6 mm thick of size 8" x 10"x 2" (inch) with 3 mm thick bakelite / hylam sheet top cover of white colour ISI marked including machine screw & washer with complete electric connection to existing switch/socket/fan regulators complete with civil work and making good to surrounding surface with white/colour wash or any type OBD as per existing colour of building complete all as specified and as directed .

All as per Item No- 119 here-in-above but of size 6" x 4"x 2" (inch) complete all as specified and as directed .

All as per Item No- 119 here-in-above but of size 4" x 4"x 2" (inch) complete all as specified and as directed .

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate) complete all as specified and as directed .

M & L for replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with copper earth plate electrode 60cmx60cmx3 mm thick electrode buried directly in ground earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.5 m below ground level connected to copper earth strip 20x3 mm by means of bolts, nuts, check nuts and washers etc of copper and earth lead protected by provision of GI pipe 40 mm bore of medium grade from earth electrode to test point incl provn of concrete pit in PCC(1:2:4) type B-1 using 20 mm graded stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (Weight not less than 4 Kg/Sqm) PCC cover with handle and with 6 mm dia MS bar handle made to shape, GI pipe medium grade 20 mm bore pipe for watering perforated at bottom1.75 mtr long placed on top edge of earth plate, common salt (100 KG) and charcoal(100 KG) and BFC(100KG) compound filling with alternate layers test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50 mtr, all as per Electricalplate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note:- (1) copper earth strip and protection pipe 40 mm bore GI medium grade beyond 7.5 mtr will be measured and paid seperately under the respective item of this schedule. (2) Testing of earth resistance done by the qualified technician/electrician at his own arrangements and maximum acceptable limits (3) Test Terminal block ,Copper strip 20 x 3 & GI pipe 40 mm up to 7.5 Mtr are included in the rate quoted by the contractor

Supply and fix in replacement of copper strip Copper strip 20 x 3 mm with saddles and fixing screws etc.for roof conductors and down conductors above ground complete all as specified and as directed.

Supply and fix in replacement of Copper strip 32 x 6mm buried in ground as continue earth lead from copper earth plate to test terminal point for complete all as directed and as specified.

Supply and lay in replacement of 'Medium grade',galvanised steel tube of dia 40 mm ,on roof for fixing of lightening arrester including taking down with necessary fixing arragements using PCC complete all as specified and as directed .

S & F Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections , one twin core cable flat or circular multi stranded Aluminium conductor of size 6 Sqmm complete all as specified and as directed .

S & F twin core flexible twisted copper conductor wire 1.1 KV for Phase (Red) and neutral (Black) of size 0.5 Sqmm for connecting light/switch /socket etc. as per site requirement including taking down old unserviceable one complete all as specified and as directed .

S & F In replacement including taking down of old unserviceable light fittings LED tube light fitting 2x20 Watt (4 feet) industrial batten box type with bipin holders connector block complete with all accessories internally prewired and incl making fixing arrangement, connecting up three core wire incl 2x20 watt retrofit LED tube rod T8 polycabonate to be fixed at any height of wall/ceiling complete all as spd and directed . Make Havells Cat No. STREAKT8UPTO2X22WSSBSWH and PHOTONULTRAE 2.01213T8SSTL20WLED 865SPC, Crompton Cat No. IGP162LT8-16 and LT8-20-865-(2), Bajaj Cat No. BLRB-DB 218 and BLRB 20 CW LED.

S & F in replacement including taking down of old unserviceable LED backlite panel light fitting 1' x 4' of capacity 36 Watts powder coated white CRCA full glow suitable for ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed . Make:-Crompton Cat No- LCTLRN-40-CDL(1X4), Syska Cat No-SSK-TVP-12030-36W, Havells Cat No-VENUSNEOHE4X1PLR36WLED 857S. Note :- Quoted rate are deemed to be inclusive of any civil work as required at site.

Supply and fix in replacement including taking down of LED bulb 15 watts with B-22 base operated on single phase AC supply complete all as specified and as directed . Make: Crompton/Havells/Bajaj

Supply and fix in replacement LED bulb 9 watts with B-22 base operated on single phase AC supply complete all as specified and as directed . Make:Crompton/Havells/Bajaj

Supply and fix in replacement LED bulb 7 watts with B-22 base operated on single phase AC supply complete all as specified and as directed . Make:- Syska/Havells/Bajaj

Universal refrigeration and Engineering Company

BEEGEE DESIGN SYSTEMS

SUN LIGHT HOUSE

THE DECAN ENGINEERING AND REFRIGERATION COMPANY

Srinivasa Consructions

Sri Associates

BHATNAGAR ASSOCIATES

ATUL ENTERPRISES

STANDARD AGENCIES