Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹16.5 L+₹15,870.45 (0.97%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹16.8 L+₹47,313.03 (2.89%)Rejected-AOC | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹17.5 L+₹1.2 L (7.17%)Rejected-AOC | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹17.7 L+₹1.3 L (7.96%)Rejected-AOC | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_583087_1
8400-934/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹36,000
Yes
3 Apr 2023
25 Feb 2023
22 Mar 2023
25 Feb 2023
20 Mar 2023
11 Mar 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbish off from the premises complete all as specified and directed.
M&L for Cement concrete 100 mm thick type B- 1, 1:2:4 (using 20 mm graded aggregate) laid on concrete floors and pavings; laid over cement concrete subfloors etc. and finished to an even and rough surface complete all as specified and directed by Engg-in-charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick 150 GSM of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel as in ridges sheet 0.50mm thick 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling wall and ceiling board of any descrition complete all as specified and directed.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed
S&F Anodised powder coated aluminium snap grid frame work for false ceiling ( size of grid 605x605 mm ) complete all as specified and directed.
S&F Non asbestos fibre cement designer building boards 6 mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified directed
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water and removing rubbish off from the premises etc complete all as specified and directed.
M&L for rendering 20 mm thick in CM (1:4) with WPC on other than fair face of brick work surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
Supply only Integral Water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for preparation of new plastered or un-plastered surfaces of walls applying two or more coats of 100% premium acrylic emulsion (Exterior weather coat) paint having VOC less than 50 gm/litre and UV resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of old wall surfaces complete removal existing finishes including filling of small holes etc and applying two coats of oil bound distemper over a coat of alkali resistant primer over plastered surface to prepare the surface even and smooth complete all as specified directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified directed.
M&L for framed work such as grills etc with endsof bars shouldered nd or riveed or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F mild steel as in trusses, purlin, crane rail and joist, channel anlge or tee sections including all necessary cutting welding etc complete fonforming to FE 410 W( Gde-E-250) quality A all as specified and directed.
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified directed.
M&L for sheet glass 4 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 Sqm in each pan complete all as specified directed.
Demolition of brickwork masonry, laid in Cement mortar and removing rubbish off from the premises complete all as specified directed.
M&L for brick work with old sizes fly ash ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in CM (1:4) all as specified as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified directed.
All as per item No 23.00 mentioned here-in-above but 6mm to 8mm dia complete all as specified directed.
M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified directed.
M&L for RCC 1:1.5:3 type A1 (using 20 mm graded stone aggregate) nominal mix in columns, pillars, piers, posts and struts etc complete all as specified and directed by the Eng-in-charge.
M&L for RCC 1:1.5:3 type A1 (using 20 mm graded stone aggregate) nominal mix in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified directed
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified as directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for Coloured Glazed ceramic tiles 350 x250x 7 mm / 450 x 350 x 6-7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendring layers in CM 1:4 complete all as specified
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) over 15 mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified directed
Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 Sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 Sqm & n.exc 4 Sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified directed.
S&F Factory made single extruded WPC ( Wood polymer composite ) solid door/window and others frames/chowkhat of size 50x125 mm double shutter comprising of virgin PVC polymer of K value 58-60 (Suspension Grade ), calcium carbonate and natural fibres and non toxic additives fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750kg/cum and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engg-in-charge.
S&F Factory made single extruded WPC ( Wood polymer composite ) solid Plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade ), calcium carbonate and natural fibres and non toxic additives having minimum density of 650kg/cum and with property of being termite/borerproof,water/moisture proof and fire retardent and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete as per direction of Engg-in-charge.
Taking down shutters of any description exc 1 sq. m each complete all as specified and directed by Engineer-in-Charge
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including Aluminium snap beading for glazing/ paneling, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F powder coated Anodised aluminium window shutters, sliding type without sash bars, (minimum thickness of powder coating 50 micron) for three track shutters of windows & ventilators aluminium sections weighing 0.55 kg/m including necessary joining cleats , Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, anodised aluminium fittings suitaible etc all complete as per architectural drawings and the directions of Engineer-in-charge.
S&F chicken wire mesh for plaster at cracked beam column junctions with brick wall,cutting the grooves in wall , embedding 20 mm dia iron nut bolts across the wall ,plastering in CM (1:3) and similar activities all as specified and directed by Engr- in - Charge.
M&L for 15mm thick PCC 1:3:6 Type C1 as in plinth protections finishing even and smooth without using extra cement and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified directed.
S&F 100 mm size butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified directed
S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified directed.
S&F aluminium handles, cast type, anodised 150mm long complete all as specified directed.
Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store complete all as specified directed
Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified directed
S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.
S&F vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device all as specified and directed.
S&F designer wash hand basin vitreous china ,flat back of size 550x400 mm with long pedestal including cutting for pinning in ends brackets and including of PVC connection, waste pipe, CP waste coupling and designer CP Pillar taps 15 mm etc complete all as specified and directed. (Make - Hindware/CERA/Parryware)
S&F PVC valve less, syphonic action type low level flushing cistern (10 ltrs capacity), white with inlet ball valve float and handle including brackets complete all as specified directed (Make - Hindware/CERA/Parryware)
S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with clamps and jointed complete complete all as specified directed by Engr-in-Charge.
All as per item No 61.00 mentioned here-in-above but 75 mm bore complete all as speified and directed.
S&F in repair 110mm bore PVC (SWR) bends any radiuswith access door complete complete all as specified directed by Engr-in-Charge.
S&F 25mm bore curtain rods mild steel, chromium plated etc. fixed in brackets complete all as specified directed
S&F stainless steel bracket fancy type suitable for fixing of 25 mm dia curtain rods with designer nobs complete all as specified directed
E/M PORTION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified directed
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
M&L for point wiring for socket outlet 3 pin, 5 amps on Independent board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
M&L for point wiring for socket outlet 3 pin, 5 amps on Same board board controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes/ modular , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified directed (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified directed
S&F socket 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified directed
S&F switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified directed
S&F ceiling rose surface bakelite 65 mm x 50 mm three terminal suitable for 230 Volts AC 6 Amps complete all as specified directed
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .
S&F submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified directed (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F submain two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified directed (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F LED light fitting 1x 18 W LED batten light AC decorative tube light connedting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as directed (Make: Bajaj/Havells/Jagwar/CG).
S&F wall security light fittings 25 watts 230v, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete all as specified directed (Make - Bajaj/Crompton/Jagwar/CG)
S&F LED metal bulk head light fitting 1x10W luminaires CCT :CW including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified directed. (Make: Bajaj/Havells/Jagwar/CG).
S&F LED luminaire 2'x2' CCT CW 36 watt item code LULTSLS036XC high effiency PMMA diffuser soft glare free light complete with driver ,holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed by engr-in-charge. (Make: Bajaj/Havells/Jagwar/CG).
S&F lamp holder, PVC/polycarbonate type with back plate including 15 inverter type with 4 Hours back up straight or angular suitable for Led lamp complete all as specified directed
S&F in repairs epoxy powder coated sheet metal enclosure for DBs,Single door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified directed (Make: Havells/ABB/Legrand)
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Vertical Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar 125 Amp MCCB, DIN channel , neutral link and incoming contact complete all as specified directed (Make: Havells/ABB/Legrand)
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified directed (Make :Havells/ABB/Legrand).
S&F in repairs MCB SPN 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) (Make : Havells/ABB/Legrand).
S&F in repairs MCB SPN 40 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating). (Make : Havells/ABB/Legrand).
S&F 3 phase 415 volt of capacity 100 Amp change over switch with bus bar complete with proper thimbles ,copper reducer etc etc all as directed By Engr-in-Charge. Make :Havells/ABB/Legrand.
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth lead electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth lead encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
S&F in repair steel body heavy duty exhaust ventilation fan of sweep 380mm after taking out the existing burnt out fan complete all as directed by Engr-in-Charge. (Make : Havells/ Bajaj/Crompton).
Taking down and Rfixing/Hanging after oiling greasing and replaced old fan capacitor replace new fan capacitor, ball bearing etc and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
S&F XLPE insulated armoured cable, 35 sqmm 4 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and n.exc 1.5m depth and getting out in soft/loose soil complete all as specified directed
Returning, filling, including spreading, leveling, watering and well ramming in layers n.exc 25cmin soft/loose soil complete all as specified directed
Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified directed
Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified directed (Note : Punned thickness shall be measured).
M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed
Disconnecting & taking out and removing from trenches/ducts/sleeve//on pole/wall etc existing UG XLPE insulated , pole, pipe, floor, will etc existing UG XLPE insulated, armoured cable of any description, any size/core and in any position complete all as specified and directed. (Note : Earth work shall be measured & paid seperately under respective item).
Supply, laying , jointing & testing XLPE insulated armoured LT cable 95 sqmm 3.5 core, 1100 volts grade heavy duty with aluminium conductor complete laid in trenches/pipe on road etc complete all as specified and as dtrected. (Note : Metal Route Indicator LT type to be fixed on every 30 mtr and corner of Road distance and size of metal Route Indicator 150 mm dia and Angle 25x25 mm , thickness 5 mm hight 6 cmground level with PCC and 12 cm uper groundlevel etc rate to be considered in this item rate) (Make : POLYCAB/KEI/Havells)
Supply, laying &fixing in replacement GI light grade pipes of 50 mm dia for cable protection laid in trenches/fjoor/roof and on the walls,with all acessories all as specified and as directed.
M&L for painting cleaning and repair of LT panel size upto 1.2 x 1.0 x0.6 mtr after cleaning of surface including removing rested particles removing dust tightening nut, bolts wlding and painting on complete panel two coats of synthetic enamel aluminium paint over a coat of red oxide including stand complete all as directed. Note : (i) Cost of marking description on the front door as per direction of Engr-in-Charge is incl in quoted rate (ii) Cost of misc items like copper cable, lugs thimbles etc if required are included in quoted rates.(iii) Front and back side of PCC (1:2:3) etc included in quoted rate).
M/S SWAPAN KUMAR MONDAL
Jaibalaji Enterprise
M/S GLOBE ENTERPRISE
INDIAN CONSTRUCTION
M/S JK TRADING
HIGH HILLS INFRA
SINGH CONSTRUCTION
M/S N B SEN CONSTURCTION
BISWAS ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .