Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC FLAT NO 20 AMBEDKAR ROAD DEHU ROAD PUNE 412101 D 101 CESC INDEX NO D 101 HQ CESC PUNE | NA | NA | 412101 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹39.0 L+₹2.3 L (6.18%)Rejected-Finance 6 SAI KRUPA SONAWANE PARK BEHIND TILAK NAGAR BUS STOP OZAR MIG NASHIK 422206 | NASHIK | NASHIK | MAHARASHTRA | 422206 | L2 | Rejected-Finance Being Not L1 |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
9 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
ADDN / ALTN TO BLDG NO P-138, CERTAIN BLDG IN TECH AREA AND EXISTING GATE TO STAINLESS STEEL GATE AT CERTAIN LOCATIONS AND RENOVATION OF DEPOT HOUSE AT AF STATION OJHAR
2023_MES_624841_2
8118/E8
Open Tender
Civil Works
Item Rate
335 days
OJHAR
As per tender documents
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹87,000
Yes
23 Jan 2024
18 Nov 2023
11 Dec 2023
20 Nov 2023
9 Dec 2023
21 Nov 2023
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises
Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level)
Excavating in trenches not exc 1.5m deep and 1.5m wide and getting out in hard dense soil
M&L for Plain cement concrete 1:4:8 Type D-2, using 40 mm graded stone aggregate as in foundation.
Returning filling including spreading levelling watering and well ramming in layers n.exc 25cm in soil all as spd and directed.
Removing excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as spd and directed.
M&L for RCC (Nominal mix) type B1 1:2:4 using 20 mm graded aggregates for foundations ,including rafts,founation beams,plinth beams,bases for columns etc
M&L for RCC (Nominal mix) type B1 1:2:4 using 20 mm graded aggregates for columns,pillars,piers,posts and struts
M&L for 20mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement mortar 1:2.
M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregate as in lintel bands and roof bands
M&L For reinforced cement concrete type B1 1:2:4 ( 20 mm graded aggregate) Slab supported on walls, beam and columns in floor, roofs, slabs and in shelves and the like etc
M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregate as in Chajjas
M & L Form work to Sides of concrete foundations,footings,bases of columns,plinth beams and similar work etc
M & L Form work to Sides of pillars,posts,struts,piers,columns and stanchions for rough finished surfaces of concrete
Form work to soffit of suspended slab such as roof slab, floor slabs landing and similar work not exceeding 200 mm thick horizontal or slopping.
Use and waste of form work to sides and soffits of chajjas fair finished
M&L for Form work to sides and soffits of floor or roof beam , lintels including support , overhangs etc also splays between floors and beams etc.
S&F TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending, spirally for hooping for column hooking ends and binding with and including mild steel steel wire (annealed ) not less than 0.90 mm dia or seccuring with clips quility confirming to Deformed or twisted bars.
ditto but 6 to 8 mm dia as in stirrups
M&L for Moorum/approved earth filling in floors or pavings laid in layers n.exc 15 cm thick spread levelled and rammed including watering
M&L Hardcore guage nexc 63 mm n.exc. 100 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled / rammed to a true surface.Brocken stone or Boulders
M& L Plain cement concrete 1:4:8 Type D2 ( using 40 mm graded stone aggregate) as in sub base in 75mm thick all as specified.
M& L Plain cement concrete 1:2:4 Type B1 ( using 20 mm graded stone aggregate) as in sub base in 75mm thick all as specified.
M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate .
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in floor / plinth protection including finished even and smooth without using extra cement.
Demolition of brick work or stone masonary, built in cement mortar.
M&L for brickwork using old size bricks Sub class B straight or curved on plan exc 6m mean radius built in CM 1:6
Taking down Chowkats with shutters (Without taking off shutters) area exc 1.5 Sqm but not exc 4.00 Sqm
M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints all as specified
S&F of II Class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); 35mm thick supplied and fitted to chowkats
S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc.
S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement.
S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size25x3MM
M&L plain cement concrete 1:3:6 type CI using 20mm graded stone aggregate in bed black for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as dir
M&L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21.
S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.
S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised
S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples
S&F of steel ventilator with top hung shutter including hinges, steel peg stay complete
M&L for 15 mm thick screed bed or bedding a layer in CM 1:4 for laying floor finishes.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectangular ) area of each tiles exceeding 0.06 Sqm but not exceedng 0.11 sqm in floors etc .set and jointed neat cement slurry and pointed with colour cement to match.
M&L for glazed non skid ceramic coloured tiles of size 450x300x7mm/*400x300x7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match, non skid joint free tiles.
M & L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
All as per item no.45 above but as in skirting, dado, risers in steps including backing coat 10 mm thick in cement mortar 1:4 complete all as specified.
Taking down cement plaster on brick or stone walls incl racking out joints, hacking for key, scrubbing down with water etc.
M&L for Rendering 10 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:4, finished even and smooth without using extra cement.
M&L for 10mm thick rendering in CM 1:4 as in backing coat to receive tile finish as in skirting and dados
M&L for Rendering 15 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:4, with water proofing compound finished even and smooth without using extra cement with IWPC
M&L for Rendering 5 mm thick cement plaster on ceiling in cement mortar 1:3, finished even and smooth without using extra cement.
M&L for preparation of new plaster surface with two coat of OBD over a coat of primer complete all as specified and directed
M&L for two coats of cement based paint over a coat of cement primer on newly plastered surfaces of walls including preperation
M&L for preparation of new plaster surface of ceiling with three coat of white wash over a coat of primer complete all as specified and directed
S&F 3mm thick sheet figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10cm including preperation of surfaces
Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store
Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store
S&F UPVC pipe pressure rating 10kgf/CM2 fixed complete to walls, ceiling or in floors etc any type of pipe of size 15mm bore UPVC tubing
All as per item No 59 but of size 20 mm bore UPVC tubing
Dismantling water tanks and removing to store capacity exc 500 and not exc 1000 litres.
S&F of rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all specified of capacity 500 liters
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore
S&F of Ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe.
S & F Pillar taps 15mm dia cast copper alloy with capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm dia pipe all as specified
S&F bib tap long body foam flow with flange of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule of Prayag /Seiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.
S&F Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15mmbore
S & F PVC connection 15mm dia 450 mm long with 2 Nos brass check nuts with washer etc complete all as specified by Engr-in-charge.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore
S& F PVC (SWR) pipes 110mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps all as directed by Engr in charge. (Work will be scattered in varius bldg in Domestic and technical area.
S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls, including necessary brackets all as specified and directed .
S&F PVC (SWR) bends any radius 75mm bore
S&F of PVC (SWR) bend any radius of bore 110mm
S&F of PVC (SWR) single T junction equal or unequal with access door of bore 110mm
S&F of PVC (SWR) bend any radius vent cowl of bore 110mm
S&F of PVC (SWR) floor trap plain with grating including jointing with solvent cement of dia of outlet 75mm Note:- Trap shall be sealed properly with the existing pipe and got tested by Engr-In-Charge.
S & F PVC (SWR) gully trap 125 / 110 mm including setting and jointing with solvent cement and removing old trap and making good all as directed by Engr in Charge
M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for manholes incl necessary form work set in CM 1:4 all as specified. (Reinforcement will be measured & paid separately)
S&F vitreous china wash down water closet pan (padestal pattern), superior fancy type white (excl fixing bolt, flushing cistern and flush type) incl connection to drain (or outgoing pipe) and to flushing pipe, anti shyphonage etc with seat cover complete.
S&F viterous china wash basin, white flat back size 550mm x 400 mm including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, fancy type complete
S&F Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge
Supply and fix Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe including fixing plugs, bedding urinal against wall in cement mortar (1:2) etc, including CP waste fitting and PVC waste pipe complete all as specified and directed
S&F PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl brackets capacity 10 ltrs and connection to pipe and fixing of chain and pull or lever including health faucet fixing in pipe etc.
M&L priming plastered roof surfaces with bituminous primer 0.3 Kg/Sqm as per IS 3384 & providing water proofing treatment by applying mineral finish 3.5 Kg/Sqm Actatic poly proplyene (Advanced) AP Torch membrance mineral finish having polyster film reinforcement stabilized with fibre glass & finished on top with gracy mineral seats torch on system of thickness 3 mm by torch bonding complete over and including rendering 20 mm in CM 1:4 on concrete surfaces of roofs, parapets etc finishing the surface even & smooth without using extra cement & provinding necessary slope including using WPC @ 3% as per manufacturer instructions after taking down carefully cement / cement lime plaster of any thickness on roofs, including existing tarfelt of any thickness and preparing the surface by cleaning of foreign matters by wire brushing, roughening surface to receive plastered scrubbing down the water all as directed and as specified.
Supply only IWPC
Cutting in to existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concreate 1:2:4 type B-1 smooth finished abd reforming benching with internal dia of pipe as 150 mm
S & F Steel rolling shutters with 1.25 mm thick lath, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete: with gear operated type with bevel gear box and crank handle.
S & F Safety lever locks mild steel with 4 levers for rolling shutters
S & F Ball bearing for rolling shutters
S & F powder coated anodised aluminium sliding window with anodized aluminium frame of 3 track with size 92 mm x 32 mm x 1.3 mm thick 02 glass and 01 stainless steel wire mesh sliding shutters with necessary channels (top rail, bottom rail and style of size 40 mm x 18 mm x 1.10 mm thick) including glazing with tinted sheet glass panel 4.00 mm thick with necessary jointing cleast, glazing clips, rubber packing, locking device used as handle also 01 no in each shutter powder coated aluminium beading, screws complete all as specified.
Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
Providing and fixing in repairs ornamental designed pattern type precast cement concrete louvres and jallies, 50mm thick (measured solid) including precast post of standard sections in different geometrical shapes, including all mouldings type B0 1:2:4, 12.5 mm graded stone aggregate set in CM 1:4 including embedding precast post etc including two coats of exterior emulsion over one coat of primerof different colour as approved completed and as directed . pattern approved by Engr in charge.
M & L for coloured vitrified tiles with matt/ glossy/ carved finish wall tiles of different pattern tiles of size exc 0.64 sqm but n exc 1 sqm & 6-7 mm thick on vertical surfaces such as skirting, dados etc, set and jointed using tile adhesive and pointing in matching coloured cement as approved complete all as specified and as directed by Engineer-In-Charge in Orient bell/Kajaria/Johnson/RAK .catalouge pattern and design as approved by GE.
M & L for coloured vitrified matt finish tiles of size exc 0.09 sqm but n exc 0.36 sqm each tile and 6 to 7 mm thick in floors etc., laid over 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed by Engineer-In-Charge.of make orient bell/Kajaria/Johnson/RAK catalouge pattern and design as approved by GE.
M&L for newly plastered surface and applying 2 coats of OBD including 3mm thick wall care putty on wall Complete all as specified and as directed by Engineer-In-Charge.
M&L for newly plastered surface and applying 2 coats of OBD including 3mm thick wall care putty on ceiling Complete all as specified and as directed by Engineer-In-Charge.
M&L Thickness 20-25 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite jamb/cill/platform complete
S&F CI floor trap 75 mm bore, plain with grating including jointing to waste pipe fixed with cement concrete B-1 (1:2:4)fixed as in repairs all as directed by Engr-in-Charge.
S&F centrifugal spun pipe red in colour 75mm bore of pipe, single socket in any length with rubber ring joint, fixed to walls /Floor. all as specified and directed by Engr-in-Charge.
Ditto- all as per item No.103 above but 100 mm dia of pipe all as specified & as directed by Engr-in-Charge.
S & F CI bends of( any radious ) diminishing pieces or tapers (larger bore measured )75 mm dia with access door all as specified and directed by Engr-in-Charge.
Ditto- all as per item No.105 above but 100 mm dia of pipe all as specified & as directed by Engr-in-Charge.
S&F CI branch pieces, single(equal or unequal) or with parallel branches 75 mm dia.
Ditto of item No 107 above but 110 mm dia pipe
S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe dia of pipe in 15 mm,
S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe dia of pipe in 25 mm,
S&F ball brass valves, high pressure , with polyethene float and fly nut complete , screwed for iron pipe or brass ferrule and fixed to 25 mm bore dia of pipe
ditto All as item No.57 but 25 mm bore.
M & L for Galvanised Iron tubes 15 mm dia heavy grade with all fittings and fixtures such as bends , elbows ,tees ,short pieces , back nuts , connectors , diminishing pieces caps pegs and clamps union etc. laid in wall/floor/ceiling as in concealed work including cutting chase in wall and making good surface .
All as item No.115 above but dia of tubes 20 mm
All as item No.115 above but dia of tubes 25 mm
Re-fixing old serviceable steel tubing 15mm bore and supply of new fittings as required at site and fixed in new or old position (walls, ceiling, floors, etc.) all as directed by Engr-in-Charge
Re-fixing old serviceable steel tubing 20 mm bore and supply of new fittings as required at site and fixed in new or old position (walls, ceiling, floors, etc.) all as directed by Engr-in-Charge
Re-fixing old serviceable steel tubing 25 mm bore and supply of new fittings as required at site and fixed in new or old position (walls, ceiling, floors, etc.) all as directed by Engr-in-Charge
S&F Toilet paper holder chromium plated fixed with CP screws of Make jaquar model No.AKP-35753 (P) (Yr-2018) /Equivalent
S&F chromium plated connection 15mm size with PTMT nuts, of length600mm Complete all as specified and as directed by Engineer-In-Charge.
S&F Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to Jaguar fLR 5053N or equivalent ,Complete all as specified and as directed by Engineer-In-Charge.
S & F brass cromium plated conceled stop cock of bore size 15 mm, in position conceled in walls/ceilings or floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces complete all as specified and as directed by Engineer-In-Charge
S&F Health Faucet one meter long flexible tube and wall hook chromium plated, screwed down, for iron pipe or for brass ferrule (Make :Jaquar ALD-573 )/equivalent
S&F Two way bib cock cast copper alloy with wall fange , chromium plated (Make : Jaquar FLR 5041N )/or equivalent in plumber etc complete and as directed.
S&F wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower and hand shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule(Make : Jaquar Cat No : FLR 5273 UPR) Complete all as specified and as directed by Engineer-In-Charge.
S&F in wash basin mixer cast copper alloy, chromium plated central hole single lever without popup waste system with 450mm long copper pipe and brass nut (Make : Jaquar model No.KUPCHR-35011BPM ) /equivalent
S & F fancy type soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge.
S & F overhead shower 200x 200 mm square shape single flow (ABS body chrome plated with gray face plate ) with rubit cleaning system of model no OHS 35497 of jaquar /equivalent including swan neck extension piece etc completed and as ditrected
S & F telephonic hand shower of 100mm dia( cat No.HSH1939of Jaquar including replacement of 1.5m long CP flexible tube ( cat No.SHA571 of jaquar)with hanging hook of make of jaquar/hindware equivalent as approved by GE.
S/F door magic eye piece to main door suitable for wooden door shutter of 35 mm to 40 mm thick of brass material round in shape 180 degree an 38 to 65 mm size of ISI mark, including drilling hole to door etc completed and as directed by Engr in charge Make Prince polo or equivalent as approved by Engr Incharge
S/F SS door stopper fancy type 125 mm long fixed to door with CP screws etc completed and as directed
S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. Of make prayag cat No.BEA 45or equivalent in jaquar Complete all as specified and as directed by Engineer-In-Charge..
S/F stainless steel towel rack 60 cm long and 20 mm diaand 45 cm in width of make jaguar cat p[art No.ACN 1181 FHN or equivalent grade 304
S/F ABS glass corner piece 12''x12'' with heavy wall brackets and ss railing fixed on wall with CP screws etc compled of make prayag or equivalent and as directed etccomplete.
S&F 2000Litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
Preparation of new or previously untreated surfaces of wood and wood based of any description, not otherwise described, over 10 cm width or girth including for all necessary preparatory work required and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in charge
M&L for two coats of plastic emulsion paint of berger or asian make of first quality on newly plastered/putty finished surfaces including one coat of primer etc completed and as directed by Engr in charge
Preparation of new plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots , removing nails etc., and applying two coats of exterior Acrylic emulsion over one coat of primer(Weathercoat)/of berger or Asian sapphire Blue on walls with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measuers etc complete complete all as specified and as directed by Engineer in charge.
S & F vitreous china wash hand basin of size 470 x 470x 110 mm, white Counter top of oval shape of thin rim table top wash basin cafe having model No.FSS WHT 29901 of jaquar or equivalent make of hindustan /Hindware etc excluding taps, including brackets and CP waste fitting and 32 mm PVC waste pipe . complete all as specified and as directed by Engineer-In-Charge
Supply and fixing wall mounted EWC with built in concealed flushing fittings with buttons plate including soft closing PP white seat cover of same make, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge.
M & L for 0.9 mm Decorative laminate type 1 of surface finish, colour and pattern of smooth glossy /matt finish with fully glazed finish as approved as in cupboard , pelmets, doors or to be fixed at any location as directed, fixed with approved adhesive as per manufacturer' s instructions including similar colour edge self adheshive banding tape hot pressed on exposed edge of board as directed. (lamination shall be machine pressed as directed on shutters , CBs , plywood etc as required.)
M & L for 19 mm thick plywood brade BWP , type BB exterior grade as in cupboards, pelmets , doors of aproved design or in any other locations fixed with screws to timber frame-work including fixed in Repairs, etc completed and as directed
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150mm.Completed all as specified and directed by Engineer-in-charge.
M & L for reinforced cement concrete pipes class NP-2 laid in jointed complete with collers ,bore of pipe 150mm Complete all as specified and directed by Engineer-in-charge.
M & L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in bore of pipe 200mm.Complete all as specified and directed by Engineer-in-charge.
Taking down carefully existing bitumen tarfelt including plaster, pcc of any description or any thickness over the surfaces of roof, terraces including flashings and junctions of parapets/Curb walls and cleaning the surface with washing including grinding the and removal of any bitumen primer completely and removing of the rubbish to a distance exceeding 500m but not exc 1.00 Km and depositing where directed by Engineer-in-charge.Note : above item rate shall be included removal of electric cables, removing of lightning protection cables etc and refixing the same with same place after competion of WPT work, nothing shall be paid extra on this account.
M&L for providing cement concrete 1:2:4 Type B0 (Using 12.5mm graded stone aggregate) as in bed plate/roof kerb/PCC padding and haunching etc all as specified and directed by Engr in Charge Note : PCC shall be laid in slope and thickness shall be average(minimum average thickness 25mm or as per site requirement for maintaining the slope) as per site including filling in depression by providing concrete bench marks for maintaining th perfect slope to drain out the rain water as directed by Engr-in-Charge. No hand mixing is allowed, mixing shall be at ground floor and mixed materials deposited on roof Manually/ mechanically to achieve the proper strength and workmanship.
M/L for 5 mm thick cement plaster in CM 1:4 when concrete is green finished even and fair on concrete surfaces without using extra cement etc completed and as directed by Engr in charge
M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as given here in after.(a) Bituminous primer @ 0.3lit per Sqm conforming to IS-3384-1986 (b) 3 mm thick APP polymer modified moply FP of M/S TEXSA Ltd or M/S STP Ltd or M/S TIKI ASPHALT HYDROSTOP(TIKIDAN) 3.5 Kg per square metre membrane (one layer) laid by torch application method.(c )Applying one coat of bituminous aluminium paint @ 100 gms per square metre over membrane. Complete all as specified and as directed by Engineer-In-Charge
Supply only Integral water proofing compound. .Complete all as specified and as directed by Engineer-In-Charge
M&L for 12mm thick heavy duty parking tiles area of size n.exc 0.16sqm set and laid on 15mm cement mortar screed of 1:4 and pointing in matching pigment mixed cement mortar.
Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil
S&F inbuilt ceramic bathtub (1600 MM X 700 MM X 420 MM) with powder coated Ms frame,front panels, drain pipe with over flow and filler and anti slip base (CAT Part No JBT-WHT-FONT 160FX) of Jaquar make or equivalent as approved and specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as aspecified and as directed by Engineer-in-Charge
Material & Labour for providing and fixing stainless steel (Grade 304) deisgner gates made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fabricating the gate with necessary accessories & stainless steel dash fasteners, stainless steel bolts,hinge etc., of required size,and fixing it on the sides of pillar/masonry for easy movement with suitable arrangement complete all as specified and directed.
M & L for 2mm stainless steel plate (304 Grade) with approved CNC cut designs to fit on SS Gates complete all as specified and as directed by Engineer-in-charge
M & L for 6mm HPL sheet in approved shades/wooden series cut to required shape to fit SS gate complete all as specified and as directed by Engineer-in-charge Make:- Pioneer or equilent
M&L for Modular Fly ash brick work , straight or curved on plan exc 6 m mean radius built in cement mortar 1:6. complete all as specified and as directed by Engineer-In-Charge.
M&L for Modular Fly ash half brick work , straight or curved on plan exc 6 m mean radius built in cement mortar 1:4. complete all as specified and as directed by Engineer-In-Charge.
M & L for rendering 10mm thick in cement plaster 1:6 on fair surfaces of brick work or concrete surfaces, is to be finished even and smooth without using extra cement in internal. complete all as specified and as directed by Engineer-In-Charge.
M&L for sunken floor slab with the following specifications:- (a) PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick,with proper slope towards GI spout. The dia of GI Spout pipe shall be 50mm Medium grade. The minimum length of Spout shall be 500mm and if any spout comes above chajja than the length of the spout shall be more than Chajja projection. Ends of Spout shall be tapered and any cutting through brick/ RCC structure shall be done by the Contractor for which rates are deemed to be included. (b) Providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth without using extra cement. (c) Damp proof course on horizontal / Vertical surfaces with preparation & applying one coat of self priming (33% dilution) and two coats of undiluted material @ 10.67 lts per 10 sqm of Make : smart care Damp proof of M/s asian paint or equivalent for water proofing compound. (d) Graded Brick bats filling under sunken floor not . (e) PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase to receive tiles. Note:- (i) For payment purpose only floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge, if any leakage/ seepage is noticed the Contractor will re-do the whole process without claiming any extra payment.
M&L for 25mm Cement concrete type B-1, 1:2:4 (20mm graded aggregate) . complete all as specified and as directed by Engineer-In-Charge.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick of colour pattern as approved and as per manufacturers catalouge (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floor etc over 15mm thick screed bed with cement mortar 1:6 and set and jointed in neat cement slurry and pointed in epoxy tile grout joint filler in appropriate shade including PVC 2-3mm spacer to match all as specified and directed by Engr in charge. Note : Epoxy grout and PVC spacers will be measured separately, the work should be carried out by skilled workmen.
Supply and mixing epoxy tile grout for tile jointing as per manufacturers instruction.
Supply only 2-3mm PVC spacers for tiling work. Note : PVC spacers must be provided at middle and junctions of each tile while tiling work to ensure uniform gaps to facilitate proper filling of epoxy grout to make the toilet wall/floor water proof.
Demolition of concrete of any description and in any position not otherwise specifically provided for
M & L for coloured glazed ceramic tiles 300 mm x 450 mm & 7 mm thick on vertical surfaces of colour patteren as approved and as per manufacturers catalouge such as skirting, dados etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer/ backing coat in CM 1:4 complete and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-In-Charge. Note : Skirting shall be provided to match with colour and size of floor tiles provided in rooms.
M&L for 2 coats of OBD on new wall surfaces including preparing with chalk whightening the new surfaces Complete all as specified and as directed by Engineer-In-Charge.
S&F Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge (Make-Rajashri/Sintex/ Accura)
S & F 100 mm Heavy duty Aluminium powder coated butt hinges as approved as per sample compete all as specified as directed by Engineer -in -charge
S & F 150 mm Heavy duty Aluminium powder coated tower bolt as approved as per sample compete all as specified as directed by Engineer -in -charge
S & F 150 mm Heavy duty Aluminium powder coated Handle as approved as per sample compete all as specified as directed by Engineer -in -charge
S&F Cast copper alloy CP angle valve type stop cock with flange suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.
S&F PVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge.
S&F Cast copper alloy CP Concealed stop cock with flange suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to Prayag /Seiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.
Supply and fixing 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed by Engineer-in-charge.
S & F 2 way Bib cock for health faucet with 2 way bib cock of Prayag /Saiko/ Parko. complete all as specified and directed by Engineer in charge
S & F soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge.
S & F vitreous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting and 32 mm PVC waste pipe complete all as specified and as directed by Engineer-In-Charge
S&F in vitreous china squatting pan Orissa pattern size 580x440mm white with CI P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc Complete all as specified and as directed by Engineer-In-Charge.Make : Parryware/Hindware/CERA
Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Note : The rate includes for chase cutting of Concealed for all the pipes shall be got tested before providing by Pressure testing machine and got approved and any leakage seepage observed , the conctractor shall be redo the same without any extra payment.
Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Note : The rate includes for chase cutting of Concealed for all the pipes shall be got tested before providing by Pressure testing machine and got approved and any leakage seepage observed , the conctractor shall be redo the same without any extra payment.
S&F PVC (SWR) branch piece, double (double Y) 110mm dia equal or unequal
S&F PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal
S&F aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazing cleat and revolving arrangement of standard section of aluminium including rubber packing, aluminium beading or gasket for for aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed Aluminium wire cloth etc all as specified and directed by Engineer in Charge.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles, Complete all as specified and directed by Engineer-in-charge.
S&F of Rotational moulded polythelene water storage tank of 1000 litre capacity cylindrical shape vertical with closed top of three layer hoisted and fixed in position. complete all as specified and directed by Engineer-In-Charge. Make :Sintex or equivalent as approved by GE
Demolition of reinfored Concrete of any description and in any position not otherwise specifically provided for
M&L for rendering 15 mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 0.12 ltr per bag of cement or as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement. Note:- (Supply only water proofing compound shall be measured and paid separately).Complete all as specified and directed by Engineer-in-charge. Note : Plaster shall be laid in slope and thickness shall be average as per site including filling in depression by providing cement mortar bench marks for maintaining th perfect slope to drain out the rain water as directed by Engr-in-Charge. No hand mixing is allowed, mixing shall be at ground floor and mixed materials deposited on roof Manually/ mechanically to achieve the proper strength and workmanship.
M&L providing cement slurry @ 3Kg per sqm on existing roof surface before laying PCC/ Plaster.
M/s M R MAHANA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .