Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 LAccepted-AOC HOUSE NO 206 GALI NO 4 GAUPURI OPP GAUSHALA PHATAK GHAZIABAD UP 201009 | GHAZIABAD | UTTAR PRADESH | 201009 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹4.0 L+₹4,154.70 (1.04%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹4.4 L+₹42,171.48 (10.6%)Rejected-AOC INDEX NO E 108 HQ CWE NO 2 DELHI CANTT J 636 SECTOR 23 SANJAY NAGAR GHAZIABAD UTTAR PRADESH 201002 | GHAZIABAD | UTTAR PRADESH | 201002 | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹4.9 L+₹88,317.83 (22.2%)Rejected-AOC | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹5.0 L+₹97,934.70 (24.6%)Rejected-AOC | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I CG
AGE I CG Noida
CERTAIN B/R MAINTENANCE OF SAILORS MD ACCN AT SEC-23 COAST GUARD NOIDA UNDER AGE (I) CG NOIDA
2024_MES_663335_1
AGE I CGN 13 24 25
Open Tender
Civil Works
Item Rate
180 days
AGE I CG NOIDA
E a i
8 documents required · 8 mandatory
₹500
AGE I CG
₹18,000
12 Dec 2024
2 Jul 2024
6 Sept 2024
2 Jul 2024
4 Sept 2024
16 Jul 2024
Amount
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc. complete all as specified and directed.
Demolition of cement concrete (unreinforced in ground floors & paving's n. exc. 15 cm thick (below or above ground level) complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed.
Demolition of reinforced cement concrete of any description (reinforcement cut as reqd to facilitate demolition) complete all as specified and directed.
Dismantling Stone Slab including cement mortar bedding, removing the rubbish off the premises of MOD land complete all as specified.
Taking down chowkhats or frames not exc. 1.5 Sqm but with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed.
Taking down shutter of any description area exc 1.00 sqm but not exceeding 2 Sqm each complete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan to any radius , built in half brick thick walls, old size bricks built in cement mortar 1:4 complete all as specified and directed.
M&L rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.
M&L for rendering 5 mm thick in cement mortar 1:3 finishing on brick or concrete surfaces finished even & smooth without using extra cement in ceiling complete all as specified and directed.
M&L for RCC 1:1.5:3 M20 type B1 (using 20 mm graded aggregate) as in slabs supported on walls, beams, and columns etc complete all as specified and directed.
Form work to soffits of suspended slabs such as roof slabs, floors, slabs, landing and similar works etc all as specified as directed
M&L for MS TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9mm dia. all as specified and directed
M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in floor to receive floor finishes etc. all as specified and directed.
S&F vitrified ceramic dark shade coloured tiles 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified and directed
M&L for vitrified /Granite /Marble /wood tiles textures ceramic 10 mm tiles in vertical surfaces or floors n exc 0.36 Sqm, over 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match .
M&L for non skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and joint in neat cement slurry and point in coloured cement to match the shade of tile ncluding 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.
M&L for 10mm thick rendering for backing of tiles in CM 1:3 on fair faces of brick work or concrete surfaces.
M&L for kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match thick shade of the slab including rubbing and polishing laid over 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
All as per item No 22 here-in-before but on vertical surfaces of walls /skirting/dado etc 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 15 mm thick screed bed in CM 1:6 all as specified & directed.
S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate etc complee all as specified. Note: The rates shall include one shop coat of priming.
S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate etc complee all as specified. Note: The rates shall include one shop coat of priming.
M&L for cement concrete 1:3:6 type C-1 (20 mm graded stone aggregate) as in back filing to pressed steel frames etc, complete all specified and directed
S&F 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl approved II class Hardwood lipping around complete all as specified and directed.
S&F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc complete all as specified and directed
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S&F 25mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commerical type on both sides complete.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be measured & paid separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F Bands, straps, supports or staysfor rainwater, ventilating pipes,including bolts, if required:hooks(stay),heavy, for largegates; hook and pintle hinges:large hasps and staples; chain hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to woodtrusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges and necessary SS screws shall be measured and paid separately
S&F stainless steel butt hinges fixed type 100mm size including necessary fittings, SS Screws complete all as specified and as directed by Engr-in-charge.
S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed
S&F in repair aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed
S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed
S&F in repair aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed
S&F aluminium anodised barrel tower bolts extruded section of size 150 mm long , all as specified and directed
S&F in repair aluminium anodised barrel tower bolts extruded section of size 150 mm long , all as specified and directed
S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as specified and directed
S&F in repair aluminium handle extruded fabricate type anodised of size 150 mm complete all as specified and directed
S&F in repair aluminium handle extruded fabricate type anodised of size 100 mm complete all as specified and directed
S&F butt hinges 100mm medium weight cold rolled mild steel.
S&F in repairs butt hinges 100mm medium weight cold rolled mild steel.
S&F in repair butt hinges 75 mm medium weight cold rolled mild steel.
S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete.
S&F in repairs 15mm wide PVC door seal strip fixed with screws to door complete size as per door specification
Taking up or down 15mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.
Taking up or down 25 mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.
S&F CPVC pipe SDR-11, 20 mm bore with plain SDR-11 fittings complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.
S&F CPVC pipe SDR-11, 25 mm bore with plain SDR-11 fittings complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.
S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on floor complete all as specified and directed.
S&Fin repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall complete all as specified and directed..
S&Fin repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in floor complete all as specified and directed.
S&Fin repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends any radius
S&F 110mm bore PVC (SWR) bends any radius
S&F 110mm PVC (SWR) vent cowl
S&F 75mm PVC (SWR) vent cowl
Dismantling wall and ceiling or insulation boards of any thickness incl brackets and cover fillets complete all as specified and directed.
S&F for anodisied aluminium snap grid of size 605 x 605mm frame work for false ceiling complete all as specified and directed.
S&F Hangers 6mm dia GI (upto 1200m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified and directed.
S&F 10mm thick multiwall (1 cell/2 wall) sandwich PVC sheet cut to shape and fixed in aluminium snap grid false ceiling complete all as specified and directed.
M&L for applying 3 mm thick wall care putty and two coats of oil bound distemper on NEWLY plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for preparing plastered or un-plastered new surface of ceiling and applying three coats of white wash.
M&L for applying 3 mm thick wall care putty on OLD SURFACES of wall and including two coats of oil bound distemper on plastered/ unplastered surfaces of wall including complete removal of existing treatment. (Upto 4 storey)
M&L for applying 3 mm thick wall care putty on OLD SURFACES of wall and including two coats of oil bound distemper on plastered/ unplastered surfaces of wall including complete removal of existing treatment. (Upto 5 to 8 storey)
M&L for applying two coats of white wash on OLD SURFACES of ceiling including complete removal of existing treatment.(Upto 4 storey)
M&L for applying two coats of white wash on OLD SURFACES of ceiling including complete removal of existing treatment.(Upto 5 to 8 storey)
M&L for two coats of synthetic enamel paint on NEW WOODEN surfaces over a coat of pink primer to new surfaces including preparation of surfaces, over 10cm width or girth.(Upto 4 storey)
M&L for two coats of synthetic enamel paint on NEW STEEL surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including roof CGI painting complete all as specified and directed.(Upto 5 to 8 storey)
M&L for two coats of synthetic enamel paint on OLD WOODEN SURFACES including preparation of surfaces over 10cm width or girth.(Upto 4 storey)
M&L for two coats of synthetic enamel paint on OLD WOODEN SURFACES including preparation of surfaces over 10cm width or girth.(Upto 5 to 8 storey)
M & L for preparation of OLD STEEL SURFACES over 10 cm width or girth and applying two coats of synthetic enamel paint including roof painting complete all as spd.(Upto 4 storey)
M & L for preparation of OLD STEEL SURFACES over 10 cm width or girth and applying two coats of synthetic enamel paint including roof painting complete all as spd.(Upto 5 to 8 storey)
Sanjay Associates (BID ID -3072189)
KRISHANA ELECTRIC WORKS (BID ID -3071121)
DP COMPLEX (BID ID -3072748)
V.V CONSTRUCTIONS (BID ID -3072491)
M/S R.S. Builders (BID ID -3082888)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .