REPAIR TO BOUDARY WALL FENCING GATE DRAIN CULVERT PATH ZONE II III UNDER AGE BR I OF GE NORTH MEERUT CANTT

Amount

Dismantling of structural steel work of any description including doors, gates but excluding framed truss complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

S&F MS framed work for ornamental and intricate design such as grills, guard bars of window and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and as directed.

M & L for preparation of new Steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint and over one coat of red oxide complete all as specified and as directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided and complete all as specified and as directed.

M&L reinforced cement concrete (RCC) M-25 (design mix) as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and as directed.

M&L reinforced cement concrete (RCC) M-25 (design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and as directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and as directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter rough finished surface of concrete complete all as specified and as directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab, floor slabs, landing chajjas and similar work not exceeding 200mm thick flat fair finished surfaces of concrete flat complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing), removal serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for 18 -20mm thick Black Granite/RED Granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement 1:2 using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing laid over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges and making hole for gas pipe complete all as specified and as directed.

S&F in repair stainless steel work as in letter making (either English or Hindi alphabet) of dimension10mm thick and 300mm height / length fixed to floors (may be inclined) or on vertical surface such as top of gate, flag posts etc complete all as specified and as directed.

Taking down of cement plaster of any description from brick work or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for applying two coats of exterior acrylic emulsion paint (weather proof painting) over a coat of primer including preparation of newly plastered surfaces of walls complete all as specified and directed.

Supply only liquid water proofing compound (I.S.I marked on packing) complete all as specified and as directed.

M&L Preparation of Old plastered surface of wall including complete removal of existing treatment & applying two coat of cement base paint complete all as specified and as directed.

M & L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins arches pillars etc complete all as specified and as directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates), in foundations, filling and mass concrete complete all as specified and as directed.

M & L brick work with sub class fly ash bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per Srl item No 24.00 here-in-before but except bricks complete all as specified and as directed.

M&L Brickwork with subclass Half bricks `B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 bricks complete all as specified and as directed.

M&L for Providing precast cement concrete 1:2:4 type B 0 (using 12.5 mm graded crushed stone aggregate) as in louvers and jallies, 25 mm thick (measured solid), including all moldings but excluding frame and set in cement mortar 1:4 complete all as specified and as directed.

M&L Broken glass coping of gauge not exceeding 63mm, applying at the rate of 10 Kg of glass per Sqm of rendered surface on top of walls over and including 25mm thick layer of cement mortar 1:3 complete all as specified and as directed.

M&L precast cement concrete 1:2:4 Type-B1 (20mm graded aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weathering's, throating etc. and setting in cement mortar complete all as specified and as directed.

M&L cement concrete 1:3:6 Type C2 (40 mm graded aggregate) as in surface channels and drains complete all as specified and as directed.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered / stopped ends etc complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

M&L 75mm thick Cement concrete 1:4:8 type D2 (40mm graded aggregate) as in sub base complete all as specified and as directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC colored interlocking paver block molded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with grey cement and pigment to match shade / colour / matrix of paver block set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and as directed.

M&L chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set and jointed in neat cement slurry and pointed in white cement to match the shade / color of tile laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, such as floor, bed block for post/struts etc complete all as specified and as directed.

Dismantling of fencing post or struts (wood, steel, RCC) any section, embedded in concrete / brick work, masonry etc, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavating in post holes(or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed blocks to fencing post complete all as specified and as directed.

S&F mild steel work as for Hand rails, half round or other stock section, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.). including necessary riveting and / or welding and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply only chain link MS galvanised fencing, heavy zinc coated (Hot Dip) of 3mm nominal dia of wire and mesh of size 50mm x 50mm conforming to IS: 2721-2003 complete all as specified in clause 10.34 on page 214 & 215 of MES SSR-2009, Part-I and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Note :- (i) Chain link fencing & line wire shall be measured and paid separately in supply only item. (ii) Standards, rails, staring bolts & screw bolts shall also be measured and paid separately.

S & F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing's and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note : Each line wire to be measured

Supplied and fixed mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 11-15 mm dia of neck and exceeding 5cm and not exceeding 10cm long, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not exceeding 10cm in width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and as directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self drilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc complete all as specified and as directed.

M&L hardcore using broken stone or boulders of gauge exceeding 63mm but not exceeding 100mm deposited spread and leveled in layers not exceeding 15cm thick, watered and rolled / rammed to a true surface complete all as specified and directed.

High Tech Metal India

vibha associates

Arun Construction Co.

SA construction co.

AEGIS INTERNATIONAL

Shikha Enterprises

M/S AMAR ELEKTRO CENTRE