ELECTRICAL WORK

Amount

Construction of Henely type tailles fuse unit 300Amp. (Two Circuit) for 250KVA Distribution Transformer Sub-Station

Construction of massonary type Distribution pillar box with first class brick ballast cement couarse sand, local sand , bric ballast , and MS Round bar of 10mm dia including straight MS Angal 50X50X6X750 mm for 250 KVA LT Substation (All the material will be arranged by the contractor)

Fixing of Henley type tail less Fuse unit 300 Amp, 650 Volt consisting of 6 Nos Brass Back entry, 6 Nos U-type Spny contact made of Copper, Brass coupling with Porcelain fitted on the GI sheet of 16 SWG with arrangement of 1 Nos Neutral link alongwith Copper bus-bar of size 750X50X6 mm made of electric copper strip for 250 KVA Transformer and required size GI Nut, Bolt and Washer with proper connection of LT single core PVC Cable of required size (cable will be provided by the department) (GI Nut, Bolt and Washer Will be arrange by the contractor).

Fixing of Copper L-piece suitable for 250 KVA Transformer of size 125X75X50X6 mm made of electrolite Copper strip (99.9% Purity) with required size (240/400 Sq. mm) Alluminium Crimping Lugs (99.9% Pure A-grade Alluminium).

Repair & extension of existing wire mesh fencing around Transformer and Distribution Pillar Box with retaining Wall & 1 No. gate with locking arrangement made of MS Angle iron of size 50X50X6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50X6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESPO. (All the material will be arranged by the contractor).

Construction of Henely type tailles fuse unit 500Amp. (Two Circuit) for 400KVA Distribution Transformer Sub-Station

Construction of massonary type Distribution pillar box with first class brick ballast cement, couarse sand, local sand , bric ballast , and MS Round bar of 10mm dia including straight MS Angal 50X50X6X750 mm for 400 KVA LT Substation (All the material will be arranged by the contractor)

Fixing of Henley type less Fuse unit 500 Amp, 650 Volt consisting of 6 Nos Brass Back entry, 6 Nos U-type Spny contact made of Copper, Brass coupling with Porcelain fitted on the GI sheet of 16 SWG with arrangement of 1 Nos Neutral link alongwith Copper bus-bar of size 750X50X6 mm made of electric copper strip for 400 KVA Transformer and required size GI Nut, Bolt and Washer with proper connection of LT single core PVC Cable of required size (cable will be provided by the department) (GI Nut, Bolt and Washer Will be arrange by the contractor).

Fixing of Copper L-piece suitable for 400 KVA Transformer of size 125X75X50X6 mm made of electrolite Copper strip (99.9% Purity) with required size (240/400 Sq. mm) Alluminium Crimping Lugs (99.9% Pure A-grade Alluminium).

Repair & extension of existing wire mesh fencing around Transformer and Distribution Pillar Box with retaining Wall & 1 No. gate with locking arrangement made of MS Angle iron of size 50X50X6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50X6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESPO. (All the material will be arranged by the contractor).

Construction of Henely type tailles fuse unit 500Amp. (Three Circuit) for 630KVA Distribution Transformer Sub-Station

Construction of massonary type Distribution pillar box with first class brick ballast cement, couarse sand, local sand , bric ballast , and MS Round bar of 10mm dia including straight MS Angal 50X50X6X1000 mm for 630 KVA LT Substation (All the material will be arranged by the contractor)

Fixing of Henley type less Fuse unit 500 Amp, 650 Volt consisting of 6 Nos Brass Back entry, 6 Nos U-type Spny contact made of Copper, Brass coupling with Porcelain fitted on the GI sheet of 16 SWG with arrangement of 1 Nos Neutral link alongwith Copper bus-bar of size 750X1000X50X6 mm made of electric copper strip for 630 KVA Transformer and required size GI Nut, Bolt and Washer with proper connection of LT single core PVC Cable of required size (cable will be provided by the department) (GI Nut, Bolt and Washer Will be arrange by the contractor).

Fixing of Copper L-piece suitable for 630KVA Transformer of size 150X100X65X8 mm made of electrolite Copper strip (99.9% Purity) with required size (630Sq. mm) Alluminium Crimping Lugs (99.9% Pure A-grade Alluminium).

Repair & extension of existing wire mesh fencing around Transformer and Distribution Pillar Box with retaining Wall & 1 No. gate with locking arrangement made of MS Angle iron of size 50X50X6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50X6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESPO. (All the material will be arranged by the contractor).

M/S ABHISHEK CONSTRUCTION

NATIONAL ENTERPRISES