REPAIRS / MAINT AND REPLACEMENT OF FURNITURE OF TRANING INFRASTUCTURE AT AFS SAMBRA.

Amount

Table 3'x2' (Drg No.FD-223/231/42(M)/224)

S&F table top with 18mm/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging (liping), polishing to teak wood edging (liping) including removing old existing table top of any type/thickness complete all as per drawing and as directed by Engineer-in-Charge.

Table Writing (Drg No.FD-275)

S&F table top with 18mm/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging (liping), polishing to teak wood edging including removing old existing table top of any type/thickness complete all as per drawing and as directed by Engineer-in-Charge.

Table dining 3'x3' (Drg No.FD-1009)

S&F table top with 18mm/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging (liping) and polishing to teak wood edging (liping ) including removing old existing table top of any type/thickness complete all as per drawing and as directed by Engineer-in-Charge.

Table Office Clerk Steel (Drg No.FD-89(M), FD-1004)

S&F table top with 18mm/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging, polishing to teak wook edging including removing old existing table top of any type/thickness complete all as per drawing and as directed by Engineer-in-Charge.

Table Typist Steel (Drg No.FD-1004)

S&F table top with 18mm/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging, polishing to teakwood edging including removing old existing table top of any type/thickness complete all as per drawing and as directed by Engineer-in-Charge.

Trestle steel (Drg No.FD-86(M), FD-1043)

M&L for preparation of steel surface of trestle steel by scrubbing down rusted steel surface using sand paper and cleaning by reqd tools and material and painting with two coats of synthetic enamel paint on internal and external surfaces over one coat of red oxide Zinc chromate primer to smooth finish complete all as specifiedc and directed.

Charpoy GI Pipe (Drg No.FD-220)

S&F plywood top of size 1980mm x 900mm x 12 mm thick 7 ply BWR grade (ISI marked confirming to IS 303) superior quality and rounded on all four corners of the plywood shall be finished with sand paper for smooth surface with the following provisions including removing old existing nylon newar from any type of GI Charpoy, tightening the frame work complete all as specified and directed:- Notes:- (a) Holes shall be drilled 03 Nos each on both long rails and 02 Nos each on each short rails. (b) Ply shall be fixed with round headed nut & bolts 6mm dia 75mm long with cut washer 3mm thick on the drilled holes. (c) Mild steel Angle iron 25mmX25mmX5mm as in stifners (03 Nos) of 900 mm long of size shall be welded to the long rails equidistantly placed between short rails. The welded portion and mild steel angle shall be made smooth by grinding duly applied with two coats of synthetic enamel black paint over a coat of red oxide Zinc chromate primer Make of ply wood: Kit Ply/ Century Ply/ Green Ply/ Archid Ply.

Table dining 3'x3' (Drg No.FD-1009)/Table Office Clerk Steel (Drg No.FD-89(M), FD-1004)/Table Typist Steel (Drg No.FD-1004)/ Trestle steel (Drg No.FD-86(M), FD-1043)

M&L for spot welding/continous welding wherever reqd for reparing of joints, broken MS conduit pipe of frame complete all as specified and directed.

M/s National Traders (BID ID -3156436)

SARGAM ENTERPRISES (BID ID -3150655)

Mahesh Traders (BID ID -3155829)