Himachal

Technical Eval

Works

Civil Works - Others

Installation of Mini Tube well for irrigation purpose at Rice and wheat Reasearch centre

HP Irrigation and Public Health

Nagrota Bagwan | Himachal Pradesh

Amount: ₹9.9 LCloses: 25 Apr 2026Closed

Timeline

Published18 Apr 2026
Closed25 Apr 2026
Technical Evaluation27 Apr 2026
Award—

Bids

3 Bids27 Apr 2026

#	Company	Status
1	Kamlesh Accepted-Technical	Accepted-Technical Accept
2	YOGESH KUMAR YADAV Accepted-Technical	Accepted-Technical Accept
3	Vijay Sharma Contractor Rejected-Technical	Rejected-Technical Reject

Tender Value

₹9.9 L

EMD Value

₹19,810

Closing Date

25 Apr 2026, 11:00 amClosed

Tender Inviting Organisation

Name

Er. Vivek Thakur EE

Address

JSV Division Nagrota Bagwan

Work Description

Installation of mini Tube well for irrigation purpose at Rice and wheat Research center Malan

Tender Information

Tender ID

2026_HPIPH_134552_1

Reference Number

EE-JSV-NBD-26-975-1025 dt.17.4.26

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Item Rate

Period of Work

90 days

Location

Nagrota Bagwan

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Cost of Tender Form and EMD (.pdf)

RequiredCopy of Enlistment with JSV and GWA (.pdf)

RequiredCopy of PAN GST EPf etc (.pdf)

RequiredDSC undertaking (.pdf)

RequiredAffidavit regarding non blacklist (.pdf)

Finance

RequiredForm6 (.pdf)

RequiredTermsandcond (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹19,810

Important Dates

Last Activity

27 Apr 2026

Published

18 Apr 2026

Bid Opening

25 Apr 2026

Download Starts

18 Apr 2026

Download Ends

25 Apr 2026

Submission Starts

18 Apr 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (8 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Transportation of suitable truck / tractor mounted where only road available DTH & ODEX / Percussion Calyx / RC Drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including leveling etc.complete in all respects as per the direction and to the entire satisfaction of Engineer-in-Charge.
2Drilling of bore of 200 mm dia as per sepcification laid down in BIS: 2800-1991( Part-I) with up-to-date ammendments, if any with DTH/ODEX method Starting with 500mm dia reduced to 400mm dia ODEX attachment, if any in all kind of soils, boulders, rock, collapsible strata, sturated soils, artesian conditions including the cost of all consumable, stores, water, fuel, lubricants and other accessories etc. complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
3Supply / Lowering of IS marked Electrict resistance Welded M.S. pipe 175 mm dia nominal size housing 6.40 mm thick confirming to BIS: 4270-2001 with up- to-date ammendments if any, of 3 to 6 mtrs. in length welded without anyc ircumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles, clamps embeded in foundation etc. including cost of all cutting, threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
4Supply / Lowering of IS marked Electrict resistance Welded M.S. sloted pipe 175 mm dia nominal size housing 6.4 mm thick having outsider dia meter 193.70mm screwed and sockted confirming to BIS: 4270-2001 with up- to-date ammendments if any, of 4 to 7 mtrs. in length pipe should have 940 slots per meter as per IS 8110 : 1985 of 75x1.57mm slot size welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles, clamps embeded in foundation etc. including cost of all cutting, threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
5Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
6Collection and preservation of soil samples in polythene bags complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
7Development of bore well by continous over pumping method with VT Pump/ Submersible pumps of suitable capacity not less than double the discharge established by the compressor method/design discharge, until the well is stand free as per clause 4.2 of BIS 11189-1985 uptodate ammendment, if any, complete in all respects as per direction of the Engineer-in-Charge within all leads and fifts. The draw down in all and discharge to be established by running the VT/submersible pump continouslly for 8 hours in the presence of officer not less than double the discharge established complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
8Providing and fixing of well cap on top of Tube well for protection 200mm dia complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts.
9Supply and Errection of submersible pumping set of (KSB/ Kalama/ Kirloskar/ Johnston/ Cromption/ BS) make conforming to BIS; 8034-1976 latest suitable for lifting clear water (latest with uptodate ammendments) fitted with bronze impellers/ suitable alloy directly coupled to squirrell case electric induction motor of same make as (manufacurer standard) conforming to BIS; 9283-1979 (latest with upto date ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor including water level guard,errection clamps,cable clips & depth gauge etc. The pump shall be suitable for operation on data given below:- i) Location of site:- The Site is located at a distance of 2.50 KM from Nagrota Bagwan Railway station. ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 980m above MSL iii) Required Pumping Machinery:- 10 HP (2 Nos sets one act as stand by) iv) Type of current:- AC three phase supply with frequency of 50 cycles per second v) Rated Voltage:- 415V ± 10% vi) Type of water:- Clear Water vii) Required Discharge 4 LPS viii) Total head in Mts. 90 mtrs ix) Pumping hours per day 8 hours x) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point. xi) Test Run 8 hours continueously for days
10Supply, Installation, Testing and Commissioning of Star Delta Starter panel for submersible pump made out of 16 Gauge sheet, powder coated dust and vermin proof, wall/base mounted and front opening door type with copper insulated wiring suitable to operate 1 Nos. pump of rating 10 HP through Star Delta Starter mechanism. Starter should be capable enough to handle the following faults like short circuit, over current, under voltage with LED ON/OFF & TRIP indicators. Make: Aarmation Electric Private Limited/MAS/ELLES/Adlec with uptodate amendments complete in all respect within all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.21 MB

Work Item Documents

Form6.pdf

Tender Documents • 1.35 MB

Termsandcond.pdf

Tender Documents • 1.34 MB

BOQ_199129.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Kamlesh

Accepted-Technical

YOGESH KUMAR YADAV

Accepted-Technical

Vijay Sharma Contractor

Rejected-Technical

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Transportation of suitable truck / tractor mounted where only road available DTH & ODEX / Percussion Calyx / RC Drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including leveling etc.complete in all respects as per the direction and to the entire satisfaction of Engineer-in-Charge.
2Drilling of bore of 200 mm dia as per sepcification laid down in BIS: 2800-1991( Part-I) with up-to-date ammendments, if any with DTH/ODEX method Starting with 500mm dia reduced to 400mm dia ODEX attachment, if any in all kind of soils, boulders, rock, collapsible strata, sturated soils, artesian conditions including the cost of all consumable, stores, water, fuel, lubricants and other accessories etc. complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
3Supply / Lowering of IS marked Electrict resistance Welded M.S. pipe 175 mm dia nominal size housing 6.40 mm thick confirming to BIS: 4270-2001 with up- to-date ammendments if any, of 3 to 6 mtrs. in length welded without anyc ircumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles, clamps embeded in foundation etc. including cost of all cutting, threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
4Supply / Lowering of IS marked Electrict resistance Welded M.S. sloted pipe 175 mm dia nominal size housing 6.4 mm thick having outsider dia meter 193.70mm screwed and sockted confirming to BIS: 4270-2001 with up- to-date ammendments if any, of 4 to 7 mtrs. in length pipe should have 940 slots per meter as per IS 8110 : 1985 of 75x1.57mm slot size welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles, clamps embeded in foundation etc. including cost of all cutting, threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
5Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
6Collection and preservation of soil samples in polythene bags complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
7Development of bore well by continous over pumping method with VT Pump/ Submersible pumps of suitable capacity not less than double the discharge established by the compressor method/design discharge, until the well is stand free as per clause 4.2 of BIS 11189-1985 uptodate ammendment, if any, complete in all respects as per direction of the Engineer-in-Charge within all leads and fifts. The draw down in all and discharge to be established by running the VT/submersible pump continouslly for 8 hours in the presence of officer not less than double the discharge established complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.
8Providing and fixing of well cap on top of Tube well for protection 200mm dia complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts.
9Supply and Errection of submersible pumping set of (KSB/ Kalama/ Kirloskar/ Johnston/ Cromption/ BS) make conforming to BIS; 8034-1976 latest suitable for lifting clear water (latest with uptodate ammendments) fitted with bronze impellers/ suitable alloy directly coupled to squirrell case electric induction motor of same make as (manufacurer standard) conforming to BIS; 9283-1979 (latest with upto date ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor including water level guard,errection clamps,cable clips & depth gauge etc. The pump shall be suitable for operation on data given below:- i) Location of site:- The Site is located at a distance of 2.50 KM from Nagrota Bagwan Railway station. ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 980m above MSL iii) Required Pumping Machinery:- 10 HP (2 Nos sets one act as stand by) iv) Type of current:- AC three phase supply with frequency of 50 cycles per second v) Rated Voltage:- 415V ± 10% vi) Type of water:- Clear Water vii) Required Discharge 4 LPS viii) Total head in Mts. 90 mtrs ix) Pumping hours per day 8 hours x) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point. xi) Test Run 8 hours continueously for days
10Supply, Installation, Testing and Commissioning of Star Delta Starter panel for submersible pump made out of 16 Gauge sheet, powder coated dust and vermin proof, wall/base mounted and front opening door type with copper insulated wiring suitable to operate 1 Nos. pump of rating 10 HP through Star Delta Starter mechanism. Starter should be capable enough to handle the following faults like short circuit, over current, under voltage with LED ON/OFF & TRIP indicators. Make: Aarmation Electric Private Limited/MAS/ELLES/Adlec with uptodate amendments complete in all respect within all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Transportation of suitable truck / tractor mounted where only road available DTH & ODEX / Percussion Calyx / RC Drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including leveling etc.complete in all respects as per the direction and to the entire satisfaction of Engineer-in-Charge.

2Drilling of bore of 200 mm dia as per sepcification laid down in BIS: 2800-1991( Part-I) with up-to-date ammendments, if any with DTH/ODEX method Starting with 500mm dia reduced to 400mm dia ODEX attachment, if any in all kind of soils, boulders, rock, collapsible strata, sturated soils, artesian conditions including the cost of all consumable, stores, water, fuel, lubricants and other accessories etc. complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.

3Supply / Lowering of IS marked Electrict resistance Welded M.S. pipe 175 mm dia nominal size housing 6.40 mm thick confirming to BIS: 4270-2001 with up- to-date ammendments if any, of 3 to 6 mtrs. in length welded without anyc ircumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles, clamps embeded in foundation etc. including cost of all cutting, threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.

4Supply / Lowering of IS marked Electrict resistance Welded M.S. sloted pipe 175 mm dia nominal size housing 6.4 mm thick having outsider dia meter 193.70mm screwed and sockted confirming to BIS: 4270-2001 with up- to-date ammendments if any, of 4 to 7 mtrs. in length pipe should have 940 slots per meter as per IS 8110 : 1985 of 75x1.57mm slot size welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles, clamps embeded in foundation etc. including cost of all cutting, threading and welding of pipes etc. within all leads and lifts, complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.

5Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.

6Collection and preservation of soil samples in polythene bags complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.

7Development of bore well by continous over pumping method with VT Pump/ Submersible pumps of suitable capacity not less than double the discharge established by the compressor method/design discharge, until the well is stand free as per clause 4.2 of BIS 11189-1985 uptodate ammendment, if any, complete in all respects as per direction of the Engineer-in-Charge within all leads and fifts. The draw down in all and discharge to be established by running the VT/submersible pump continouslly for 8 hours in the presence of officer not less than double the discharge established complete in all respects as per the direction and to be entire satisfaction of Engineer-in-Charge.

8Providing and fixing of well cap on top of Tube well for protection 200mm dia complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts.

9Supply and Errection of submersible pumping set of (KSB/ Kalama/ Kirloskar/ Johnston/ Cromption/ BS) make conforming to BIS; 8034-1976 latest suitable for lifting clear water (latest with uptodate ammendments) fitted with bronze impellers/ suitable alloy directly coupled to squirrell case electric induction motor of same make as (manufacurer standard) conforming to BIS; 9283-1979 (latest with upto date ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor including water level guard,errection clamps,cable clips & depth gauge etc. The pump shall be suitable for operation on data given below:- i) Location of site:- The Site is located at a distance of 2.50 KM from Nagrota Bagwan Railway station. ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 980m above MSL iii) Required Pumping Machinery:- 10 HP (2 Nos sets one act as stand by) iv) Type of current:- AC three phase supply with frequency of 50 cycles per second v) Rated Voltage:- 415V ± 10% vi) Type of water:- Clear Water vii) Required Discharge 4 LPS viii) Total head in Mts. 90 mtrs ix) Pumping hours per day 8 hours x) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point. xi) Test Run 8 hours continueously for days

10Supply, Installation, Testing and Commissioning of Star Delta Starter panel for submersible pump made out of 16 Gauge sheet, powder coated dust and vermin proof, wall/base mounted and front opening door type with copper insulated wiring suitable to operate 1 Nos. pump of rating 10 HP through Star Delta Starter mechanism. Starter should be capable enough to handle the following faults like short circuit, over current, under voltage with LED ON/OFF & TRIP indicators. Make: Aarmation Electric Private Limited/MAS/ELLES/Adlec with uptodate amendments complete in all respect within all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.