KMC/ WS/TPS/88/2025-2026

SUPPLY AND DELIVERY OF ELECTROCHEMICAL TOXIC GAS (INCLUDING CHLORINE) DETECTOR WITH FOLLOWING SPECIFICATION: DETECTION RANGE ? 0 TO 10PPM FOR CHLORINE GAS; RESOLUTION- < 1PPM FOR CHLORINE; RESPONSE TIME- < 50 SECOND AT 20 DEG CELSIUS FOR CHLORINE GAS; ACCURACY- ?3% ; OUTPUT- 4-20MA ; SUPPLY VOLTAGE- 15-30V DC

SUPPLY AND DELIVERY OF TWO CHANNEL CONTROLLER FOR ELECTROCHEMICAL TOXIC GAS (INCLUDING CHLORINE) DETECTOR

SUPPLY AND DELIVERY OF FLASHER HOOTER FOR ELECTROCHEMICAL TOXIC GAS (INCLUDING CHLORINE) DETECTOR

INSTALLATION AND COMMISSIONING OF ELECTROCHEMICAL TOXIC GAS (INCLUDING CHLORINE) DETECTOR

INSTALLATION AND COMMISSIONING OF TWO CHANNEL CONTROLLER FOR ELECTROCHEMICAL TOXIC GAS (INCLUDING CHLORINE) DETECTOR

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Legrand 6-32 A DP

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision FOR two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision FOR earthing attachment 2 Way

Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire `'FR' ... in PVC Casing-Capping (Precision Make) on wall/ceiling.Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand(approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2 x 22/0.3 (1.5 sqmm)

BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 2. Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m In ground floor including roof (b) above 150 mm. thick

BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC. 1. Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof.

BUILDING WORKS ( C ) Brickworks,Concrete Works etc A. BRICK WORKS 5. Brick work with 1st class bricks in lime and surki mortar (1:2) (1 lime putty/paste: 2 surki) lime to be slaked at site and the mortar to be prepared with such lime putty and first class surki made from kiln burnt bricks having its fineness modulus between 2 and 2.5 and which passes through B.S. sieve No 8 with correspondes to I.S sieve No 200 with considerable grinding and pugging it complete. a) In foundation and plinth

SECTION 1 BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] i) With 1:6 cement mortar (a) 25 mm thick plaster

SECTION 1 BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 15 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 4. Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety

BUILDING WORKS ( C ) Brickworks,Concrete Works etc?36...Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.Notes:- For shuttering in shell roof, grid roof with vertical faces folded plate, arched roof the rate in 36 (a), 36 (b) & 37 (c ) of subhead B above to be increased by 100 % . For grid roof with splayed faces, rate is to be increased by 150%.

PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 1. Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (f) (ii) 50 mm dia. medium quality

PLUMBING WORKS (A)-(III) CPVC PIPE WORKS AND FITTINGS (A)-(III) CPVC PIPE WORKS AND FITTINGS Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories,specials viz. socket,bend,tee,union,cross,elbo,nipple,longscrew, reducing socket,reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (b) For Concealed Work (i) CPVC Pipes Class-1,SDR-11(Dia) (a)15mm

PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 5. Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (iv) 50 mm dia

I.S.A AS PER IS: 2062-2011/ LATEST REVISION, MAKE: SAIL/TAT/JINDAL A) UPTO 100X 100 X DIFFERENT THICKNESS

M.S ROUND (ROLLED) CLASS 4 AS PER IS : 2004 UPTO DIA 100 MM

MAZDOOR MALE

HB ZINC PHOSPHATE PRIMER (EPOXY)

SYNTHETIC ENEMAL PAINT (IS 2932)

PAINTER.

BODAL CHEMICALS LTD. CAUSTIC SODA FOR BULK SUPPLY LYE

COMPLETE SERVICING AND HEAT VERNISHING OF 415 VOLT, 3 PHASE LT SQUIRREL CAGE INDUCTION MOTOR AFTER CLEANING THE STATOR AND HEATING IT UP PERIODICALLY AND VARNISHING BY DR. BECKS GRADED INSULATING VERNISH TO OBTAIN STABLE IR VALUE, CLEANING UP THE ROTOR, INCLUDING HEATING FOR DEMOISTURISATION, LACKER COATING ON THE SURFACE OF ROTOR STAMPING, CLEANING AND RO PRIMING ON THE END SHIELD COVERS, BEARING HOUSING AND COMPLETE THE NECESSARY REPAIRING WORKS AS PER DIRECTION OF EIC UPTO 75KW LT SQ CAGE IM

REFITTING THE PUMP MOTOR (LT SQ CAGE IM) SET WITH ALL ITS NECESSARY COUPLING AND ACCESSORIES TO ITS ORIGINAL POSITION INCLUDING FITTING AND FIXIXNG OF BEARING HOUSING NON REVERSIBLE RACHET UNIT AND PUMP SHAFT WITH PROPER TOLLERANCE AND CLEARANCE AND RECONNECTION OF TERMINAL POINTS THE OVERHAULING WORK I.E CLEANING OF CONTRACT SLIPING ETC (ALL CONNECTION STRIPS, CABLE END ARE TO BE REFITTED IN PROPER WAY INCLUDING GOOD DAMAGES OF STRIP TERMINALS) AND SATISFACTORY 2 HOURS TRIAL RUN OF THE PUMP AS PER DIRECTION OF EIC FOR ALL PUMPING STATION.

BUILDING WORKS(M) DRAIN, DOWN PIPES, CHIMNEY ETC?.(C). ADDITIONAL RATE?(21)Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes: (iii) 160 mm. Dia.

SUPPLY OF 3 POLE POWER CONTACTOR TYPE ML 1.5, 25A CURRENT RATING

Supply & delivery of the following 50 Hz, AC, Direct on Line Starter of continuous duty in sheet steel enclosure (make L&T/ABB/SCHNEIDER): 10 HPThree Phase (Max. Relay range 15-25 Amp)

LINE INTERACTIVE UPS WITH AVR OF RATING 0.65KVA WITH WARRANTY OF 3 YEARS EFFICIENCY 60% OR BETTERBATTERY BACKUP 15 MIN

SUPPLY.DELIVERY, ERECTION AND COMMISSIONING OF INDEF MAKE TRIPLE SPUR GEAR CHAIN PULLEY BLOCK WITH HOOK SUSPENSIONS TYPE (STANDARD LIFT OF 3 |MTRS) MODEL HEAVY DUTY, INDEF- P. CAPACITY-5 TON.

BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A) ORIGINAL WORKS.(4)Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty(to be done under specific instruction of Superintending Engineer) :(Two coats) i) Standard Quality

SECTION 1 BUILDING WORKS (J)WHITE WASH, COLOUR WASH, DISTEMPER A. ORIGINAL WORKS 7 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coats ii)Solvent based interior grade Acrylic Primer [This item to be done under specific instruction of the Superintending Engineer]

Add: 9%SGST

Add: 9%CGST