JH-XVI-II-KHU-02

Amount

Setting out etc all complete job as per specification and direction of E/I

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical specification Clause 201.

Compacting original ground supporting subgrade: Loosening, of the ground upto level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of of Tables 300.1 and 300.2 for subgrade construction as per Technical Spe

Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

Construction of embankment with approved material obtained from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

70 % Qty (Free Lead)

30 % (Lead upto 250m))

Sub grade: Construction of subgrade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 250m as per Technical Specification 301.4.1

Construction of subgrade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 250m as per Technical Specification 301.4.1

75% of total Quantity

25% of total Quantity

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. GRADING-III CEMENT TREATED @5%

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. GRADING-II CEMENT TREATED @5%

PRIME COAT (i) Low porosity Providing and applying primer coat with Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.7-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502.

Surface dressing using Bituminous Emulsion ( Nominal chipping size 13.2 mm) Providing and laying surface dressing as wearing course consisting of a layer of bitumen emulsion laid on the prepared surface, followed by a cover of crushed stone chippings of specified size and rolling with 80-100 kN roller including cleaning the road surface as per Technical Specification Clause 507.

Surface dressing using Bituminous Emulsion ( Nominal chipping size 9.5 mm) Providing and laying surface dressing as wearing course consisting of a layer of bitumen emulsion laid on the prepared surface, followed by a cover of crushed stone chippings of specified size and rolling with 80-100 kN roller including cleaning the road surface as per Technical Specification Clause 507.

Providing and fixing of typical PMGSY informatory Sign Board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6mm thick top and middle plate duly welded with MS flat iron 25mmx5m size on back onedges. The lower plate will be welded with MS angle iron frame of 25mmx25mm x5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm x 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All MS will be stoe enameled on both sides. Lettering and printng arrows, border etc will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy as per drawing.

Direction and Place Identification Signs upto 0.9 sqm Size Board. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing

Reinforced cement concrete M-15 grade 5th Kilometer stone (Precast)/Local stone of stadard design as per IRC:8 fixing in position including painting and printing etc as per drawing and Technical Specification Clause 1703.

Reinforced cement concrete M-15 grade Ordinary Kilometer Stone (Precast) stone/Local stone of stadard design as per IRC:8 fixing in position including painting and printing etc as per drawing and Technical Specification Clause 1703.

Reinforced cement concrete M-15 grade 200m stone (Precast) stone/Local stone of stadard design as per IRC:8 fixing in position including painting and printing etc as per drawing and Technical Specification Clause 1703.

Boundary pillar: Reinforced cement concrete M-15 grade boundary pillars/Local stone of standard design as per IRC:25 fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 704. (Boundary pillar/ FI Post)

Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered/concrete surface as per drawing and Technical Specification Clause 1701

Protection Work

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Providing and laying boulder pitching on slope over prepared filter media in embankment protection with stone boulders of minimum size 25kg laid by dry complete as per drawing and technical specification Clause 1301

Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling Coarse below open foundation of Head walls as per drawings & Technical Specification Clause 1109

Stone masonry in cement mortar (1:4) random rubble masonry for foundation complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204

Stone masonry in cement mortar (1:4) random rubble masonry for superstructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Plastering with cement mortar (1:4), 25mm thick on brick work in substructure as per technical specification.

Providing 1.5 mm thick cement punning -do -do- etc. all complete job as per specification and direction of E/I.

Back filling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8

Providing coarse clean sand filling in foundation trenches including ramming and watering in layer not exceeding 100mm thick with all leads and lifts including cost of sand, labour, royalty and taxes all complete job as per specification and direction of E/I.

Providing and laying boulder pitching on slope over prepared filter media in embankment protection with stone boulders of minimum size 25kg laid by dry complete as per drawing and technical specification Clause 1301

HUME PIPE CULVERT 1nx1m dia

Excavation for Structures Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 including setting out,construction of shorting and bracing, removal of stumps and other deleterious

Bedding for pipe (ii) Type A (First Class) Bedding on well compacted sand, moorum or approved granular material as per clauses 1105 (ii)

Plain Cement Concrete M10 (1:3:6 nominal mix) in levelling Coarse below open foundation of Head walls as per drawings & Technical Specification Clause 1109

Stone masonry in cement mortar (1:4) random rubble masonry for foundation complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204

Providing and laying 1000mm dia reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar (1:2) but excluding excavation, protection works, backfilling, concrete and masonry work in head walls and parapets clause 1106 SOR 9.3 (B)

Plastering with cement mortar (1:4), 25mm thick on brick work in substructure as per technical specification.

Providing white washing, three coats over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke and mash marks with jhama rubbing scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I.

RCC culvert 2x4mx2.5m

Earthwork in excavation for structures as per drawings and technical spepcification clause 305.1 including setting out constgruction of shoring and bracing removal of stumps and other deleterious material and disposal upto a lead of 50m dressing of sides and bottom and backfilling in trenches with excavated suitable material. (RWD 11.1)

Filling (Sand) in foundation trenches as per drawing and technical specification Clause 305.3.9 (RWD SOR 11.2)

Providing and laying of dry rubble flooring complate as per drawings and technical specification Clause 1303.3 (SOR 14.8)

Stone masonry work in cement mortar in foundation complete job as per drawing and technical specification clauses 702, 704, 1202 & 1203. . RWD Item no. 11.6 (III) (ii) PCC M-15

Stone masonry work in cement mortar in foundation (1:4) complete job as per drawing and technical specification clauses 702, 704, 1202 & 1203. . RWD Item no. 11.6 (III) (ii) Coursed rubble masonary 2nd sort (1:4)

Stone masonry work in cement mortar in sub structure complete job as per drawing and technical specification clauses 702, 704, 1202 & 1204. RWD Item no. 12.4 (I) (i) Coursed rubble masonary 2nd sort (1:4)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (11.4) PCC M-20

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specification clauses 800, 1205 and 1205.5 (DECK SLAB M-25) (.RWD Item. no. 13.1 (ii)

Supplying fitting and placing with MS Bar reinforcement (Fe 415) in sub structure complete as per drawing and technical specification clauses 1002, 1005, 1010 and 1202. (RWD SOR 12.8)

Pointing (1:3) on stone work in parapet as per technical specifications clause 613.4 abd 1208.4 (RWD SOR 13.19)

Providing and fixing Asphalt Plug in expansion joints in culverts, filling the same with bitumen, cement and sand etc. including cost of all labours and materials all complete as per MOST specification and direction of E/I.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 (12.9)

Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 (RWD 10.11)

Providing concrete for plain/reinforced concrete in open foundation complete as per drawings and technical specification clause 802, 803, 1201 & 1203. (RWD SOR 11.4 (ii) PCC Grade M-15

Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3

Maintenance

For 1st Year

For 2nd Year

For 3rd Year

For 4th Year

For 5th Year

Rajesh Bhardwaj Construction Pvt. Ltd

RAM KRISHNA SHUKLA

VAISHNAVI INFRA PROJECT

kulwant singh andco