RENOVATION OF CERTAIN WAHSROOMS AT OTM AREA GUARD POSTS, NFS SITES, AIRMEN BILLETS AND OTHER OTM BLDG AT VSN NAGPUR

Amount

Dismantling of old textile roof treatment of any type including roof tiles (if any) including cleaning the concrete surfaces of RCC roof slab thoroughly with wire brushes, washed and dried. etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for. Note : All demolished items/ debris to be removed out side of MoD land.

Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and directed.

Material and labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even without using extra cement all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

Material and labour for appyling bitumen primer @ 0.30 Ltr/sqm evenly over plastered suface complete all as specified and directed.

Supply and fixing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application complete all as specified and as directed.

Material and labour for applying bitumen base aluminium paint at 0.2 kg/Sqm in two coats over APP modified polymer for non accessible roof complete all as specified and directed.

Material and labour for cement concrete tiles 25cm x 25cm x 22mm thick with grey cement and no pigment, machine pressed; set jointed and pointed in cement slurry in floors with screed bed or bedding layer of 20 mm thick in CM 1:6 etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick/concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick/concrete wall surfaces, finished even including mixing integral waterproofing compound complete all as specified and as directed. Note: WPC shall be measured and paid separately under relevant item.

Material and labour for rendering 5 mm thick in CM 1:3 on concete surfaces, finished even & smooth with out extra ement in ceiling complete all as specified and as directed.

Supply only integral waterproofing compound

Material and labour for preparation of new plastered surfaces of wall and applying 2 coats of cement base paint complete all as specified and as directed.

Material and labour for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding if required at site complete all as specified and as directed. Note : Shade and pattern of the colour to be approved by GE.

Material and labour for preparation of new plastered surfaces of walls and applying 2 mm thick wall care putty in layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying 3 coats of white wash complete all as specified and as directed.

Material and labour for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

Material and labour for complete removal of existing treatment of wall surfaces and applying 2 mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment of ceiling surfaces and applying 1 mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal all as specified.

Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

All as per item No 21 above but 20 mm bore

Material and labour for refixing old steel tubing of 20 mm bore and connections in new or old position in walls, ceilings, floors, etc complete all as specified and as directed.

All as per item No 22 above but 20 mm bore

All as per item No 21 above but 25 or 32 mm bore

All as per item No 24 above but 25 or 32 mm bore

All as per item No 22 above but 25 mm

Dismantling water tanks and removing to store (capacity exc 250 & n exc 500 ltrs) complete all as specified and directed.

Refixing of dismantalled water tanks of 500 ltrs capacity with all fittings of GI including hoisted and fixed in position complete all as specified and directed.

Supply and fixing 500 ltr capacity rotational moulded polyethylene water storage tanks with all fittings of GI (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Dismantling water tanks exc 500 ltr but n exc 1000 ltrs complete all as specified and directed.

Refixing of dismantalled water tanks of 1000 ltrs capacity with all fittings of GI including hoisted and fixed in position complete all as specified and directed.

Supply and fixing in repair Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply & fixed in repairs 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply & fixed in repair 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and water tank nipal fixed complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site complete all as specified and directed.

Taking down of shutters of any description exc 1.00 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Supply and fixing pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

Supply and fixing pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-0 using 12.5mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames

Supply and fixing of 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fixing glazed/wire gauged/skeleton shutter 35 mm thick out of (well kiln seasoned) 2nd class hard wood (hollock) the size of rails and style as per IS chemically pressure treated in factory gainst termite infestation prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads complete all as specified and as directed. Note : Wire gauge/glazing to be measured and paid separately.

Supply and fixing for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications complete all as specified and as directed.

Supply and fixing for 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-in-Charge complete all as specified and as directed.

Material and labour for preparation of new wood base surfaces applying one coats of pink primer and two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed.

Material and labour for preparing new surfaces of steel of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaes of any dscription over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down of shutters of any description exc 1 Sqm and n. exc 2 sqm each and refixing in same opening after resecuring or easing & adjusting etc complete all as specified and as directed.

Material and labour for aluminium framed doors/windows/ventilators sections any pattern, fixed/side hung/silding (two or three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for glazing/gauzing including necessary jointed cleats, etc complete all as specified and as directed. Note-: Glazing/ gauzing shall be measured and paid separatly

Supply and fixing 3 mm thick figure glass, pin head type and glazing with oil putty, clip, beading or any aluminium section in squares n. exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fixing Sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 4 mm thick fixed to aluminium section complete

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing for 100mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed complete all as specified and as directed.

Supply and fixing 150 mm long aluminium anodised handles, cast type complete all as specified and as directed.

Supply and fixing 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fixing for 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate complete all as specified and as directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm.

Supply and fixing in repairs of harrison rail mild steel chromium plated of 25mm dia for curtain rod fixed with two Nos of brackets, stops for each rail complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quions, arches, pillars etc. complete all as specified and as directed.

Material and labour for Brick work with sub class 'B' bricks (Old Size bricks) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. Note : All demolished items/ debris to be removed out side of MoD land.

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggr) as in floor complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note : -All demolished items/ debris to be removed out side of MoD land.

Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as on floor complete all as specified and as directed.

Material and labour for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 all as specified and directed.

Material and labour for glazed ceramic coloured tiles of approved quality ISI marked (450 X 350 X 7 mm / 450 x 300 x 7 mm / 600 x 300 x 7 mm thick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like incl 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and as directed.

Supply and fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed.

Supply and fixing in repairs vitreous China wash down water closet pan (padestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat (white or black in colour) , closed pattern with flat bottom, and cover and mild steel chromiuum plated or cluminised hinging device also making good to floor complete all as specified and as directed.

Supply and fixing in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed.

Supply and fixing in repair Vitreous chiana wash basin white oval type size 580x450 mm including , waste pipe and plug and porcelain stopper alongwith 32mm dia CP waste coupling and PVC waste pipe in repairs complete all as specified and as directed.

Supply and fixing in repairs of vitreous china wash hand basin, white, flat back of size 630 x 450 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore complete all as specified and as directed.

Supply and fixing in repairs of 15mm bore pillar taps, fancy type (long body), (Weight not less than 622 gms), cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fixing in repairs vitreous china urinals, half stall type, white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and as directed.

Supply and fixing in repair chromium plated concealed type stop valves (Weight not less than 575 gms), cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed.

Supply and fixing in repairs chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing in repair 15 mm bore chromium plated fancy type bib taps, (Weight not less than 575 gms), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing in repair chromium plated fency type stop cock/angular cock (Weight not less than 575 gms), cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed.

Supply and fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and as directed.

Supply and fixing in repair soap dish brass chromium plated decorative type approximate size 160x90mm complete all as specified and as directed.

Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC, or PVC) set in cement mortar etc upto 100/110 mm internal dia of pipe complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall etc complete all as specified and as directed.

Supply and fixing PVC (SWR) bends any radius, 110 mm bore, complete all as specified and as directed.

Supply and fixing Tee suitable for 110 mm bore PVC (SWR) pipe complete all as specified and as directed.

Supply and fixing PVC (SWR) vent cowl, 110 mm bore complete all as specified and as directed.

Supply and fixing in repair 110 mm bore PVC (SWR) branch piece single (single Y) equal or unequal all as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall etc complete all as specified.

Supply and fixing of PVC (SWR) bends any radius of 75 mm bore pipes complete all as specified and as directed.

Supply and fixing Tee suitable for 75 mm bore PVC (SWR) pipe complete all as specified and as directed.

Material and labour PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement including all necessary concrete work and connecting jobs for making good the area complete all as specified and as directed.

Supply and fixing repairs of chromium plated bottle trap, 32/40 mm dia fancy type complete all as specified and as directed.

Supply and fixing in repairs 40 mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 kgf/Sq cm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

Supply and fixing of stainless steel grating,100 mm dia, with waste hole, of PTMT (minimum weight 40 gms), fixed complete all as specified and as directed.

Supply and fixing in repair decorated type looking mirror of area not exceeding 1.5 sqm each, 6-8 mm thick of any size complete all as specified and as directed. Note : Design and pattern shall be approved by GE.

Material and labour for plain cement concrete Type D-2, (1:4:8) (using 40 mm graded crushed stone aggregate) in foundation, sub base, below floor, filling and mass concrete etc complete all as specified and as directed.

Material and labour for factory made machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 40 mm thick stone dust cousioning complete all as specified and as directed.

E/M PORTION

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed.

Material and labour for sub main wiring (concealed) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade ISI marked and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 6 sqmm&one run of PVC conduit shall be measured as single unit

Material and labour for sub main wiring (concealed) complete with two single core 4 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade ISI marked and conduit accessories including 4 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 4 sqmm&one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer cover of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One exhaust fan point controlled by one switch.

(d) One bell/ buzzer point controlled by one push switch.

(c) One switch socket outlet modular type 3 pin 6 amp on same board.

All as per item No 112 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 112 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Note for Item No. 109 to 118 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for point wiring shall be deemed to included the cost of making good the disturbed surfaces.

Supply and fixing LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of make : CG Cat Part No. LSTS-25-CDL :- Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed.

Supply & fixing new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/ Wipro.

Supply & fixing surface mounting LED Luminaries and 1 x 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed .

Supply & Fix 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 120 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675977 or equivalent in L & T / Seimens/ Havells

Supply and fixing Switch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in L & T / Seimens/ Havells

Supply and fixing socket modular type 6 Amps 3 pin 2 module 230 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in L & T / Seimens/ Havells

Supply and fixing for ceiling rose, surface bakelite, 65 x 50 mm, three terminals ISI marked complete all as specified and as directed.

Supply and fixing socket modular type 6/16 Amps, 3 pin combine, 2 module,230 volts complete all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in L & T / Seimens/ Havells

Supply and fixing switch modular type 16 Amps,one way with indicator, 1 module,230 volts complete all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in L & T / Seimens/ Havells

Supply and fixing calling bell ding dong type , AC, single pole one way 230 volts complete all as specified and as directed.

Supply and fixing bell push switch, modular type, 6 Amps, 1 module, 230 volts complete all as specified and as directed. Make : Legrand Cat No. 675504 or equivalent in L & T / Seimens/ Havells

Supply & Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, with 100 Amp copper Bus bar as per IS-8623 complete all as specified and as directed. Make : Legrand Cat No 507611or equivalent in L & T / Seimens/ Havells

Supply & Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 4 way with 200 amps rated busbar, 240 volts, with 100 Amp copper Bus bar as per IS-8623 complete all as specified and as directed. Make : Legrand Cat No 507610 or equivalent in L & T / Seimens/ Havells

Supply and fixing MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed. Make : Legrand Cat No. 408617 or equivalent in L & T / Seimens/ Havells

Supply and fixing MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.complete all as specified and as directed.

Supply & fixing New Exhaust fan PVC body 10" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Taking down old exhaust fan and depositing it to E/M store and fixing the same exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and as directed.

Taking down old geyser and depositing it to E/M store and Refixing the same at exact location including making electric and water connection complete all as specefied and directed.

Supply & Fixing, testing of water heater storage vertical type of capacity 25 Ltrs, 5 Star rating, rated presuure of 8 bar,unique polymer coating tech, special titanium enamelled heating element of capacity upto 2 KW, special deflector alongwith grouting and fixing with suitable size of nuts and bolts fixing in the wall with PCC 1:2:4 type BI using 20 mm graded stone aggregate and making good the disturb sufrace including electric and water connection complete all as specefied and directed .

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation,laying of cable or pipe ( where provided for protection of cable or fixing with poles and stays) and getting out in any type of soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc. 50 metre and depositing where directed at a level n.exc.1.5 metre high from the starting point.

Returning, filling in trenches in soft/loose soil in layers n.exc. 25 cm after laying of cables including spreading, levelling, and well ramming complete all as specified and directed.

Material and labour for High density polyethylene pipes (HDPE) DWC duct pipe of size 63 mm dia laid in trenches for passing of LT cable complete all as specified and directed.

M/s Prakash R. Verma (BID ID -3297385)

dhanshree enterprises (BID ID -3297313)

Bidder Name

M/s Prakash R. Verma

dhanshree enterprises

Dua Construction