Culvert repair and drain repair work at various locations in Prakash Nagar and Rashmi Nagar, Block No. 80, Hariparvat Zone.

Dismantling of R.C.C./R.B work including stacking of material as directed by E/IC within distance of 60 meters.

Providing of 8HP diesel pump for dewatering of nala with pump, driver etc. all complete.

Excavation in soil mixed with moorum/shingle, kankar requiring the use of special tools & plant such as pick axes sabbals etc. foundation in ordinary Soil (Loam, Cley or sand) including, lift up to 1.50 M and lead up to 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge up to a distance of 30 M form the foundation trenches. Including royalty.

Providing of bandha for diversion of nala etc. all complete.

Providing and fixing of barricading of 100mm average ballies with in a distance of 1.50 meter for 3 rows of 3Q. 3 Nosof cross ballies, two supporting ballies of 3 meter ballies and 2 Nos perpendicular ballies tie with moonj rope including supply of all material such as ballies rope T&P required for proper completion of work and also including labour component (material will be property of contractor after dismantling).

Cartage of silt, sludge kankar and other disposable organic material etc. all complete with labor T&P including cartage of 8 km.

Providing and laying cement concrete in 1:5:10 (1 Cement :5 Fine Sand :10 Stone Ballast 40 mm guages) and curing complete, including cost of form work in foundation and floors.

M-150 Brick work in 1:4 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work.

12MM Thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not including 80mm in girth and finished even and smooth. No extra for missing any additive. 1 cement : 4 Coarse Sand.

R.C.C. work with cement approved coarse sand and 2 cm (3/4) gauge approved stone ballast in the proportion 1:2:4 for slab work excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc. and also including supply of all materials labor and tools and plants etc. required for proper completion of the work. Strength of the concrete shall not be less than M-150.

Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars).

Providing, Laying spreading and compacting 22.4-53 mm stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 whose steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying the brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to be required density.

Supply and laying stone dust etc. all complete.

Consolidation/Compaction of stone ballast 10cm thick (loose) coat including repairing of patches picking up to old surface spreading, ballast making medhies to retain water and carriage of metal upto 30m carriage of water upto 200m maintenance of barriers and all labour T&P including road roller charges etc. required for proper completion of work the stone ballast is to be supplied to the contractor free of cost at site.

Supply & fixing of pre-cast M-30 cement concrete RUBBER MOLD INTERLOCKING TILES over 40mm thick local sand bed, with 3mm thick joints filled with local sand including leveling, tempering and sweeping etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. 80mm thick, Strength should not less than M-30. (tiles shape decided by Engineer-in-charge with ISI Mark)

Providing and laying cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone) aggregate (20 mm nominal size) and cutting complete including cost of form work. In foundation and floors.

Supply and fixing of R.C.C. slab 900x450x150 mm thick as per direction of engineer-in-charge etc. all complete.

Supply and fixing of R.C.C. slab as per direction of engineer-in-charge etc. all complete.

Supply & fixing of R.C.C. manhole frame and cover including all complete.

Sub Total (A)

Add / Deduction For Estimate Figure Amount Match

Grand Total