Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.0 LAccepted-AOC 1492 SECTOR 40 B CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹6.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹6.2 LRejected-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI ZIRAKPUR | S A S NAGAR | PUNJAB | 140103 | ₹6.2 L | L2 | Rejected-Finance not L1 |
| 3 | L3₹6.5 LRejected-Finance 38A PHASE II RAVINDRA ENCLAVE BALTANA PB | ₹6.5 L | L3 | Rejected-Finance not L1 |
| 4 | L4₹7.8 LRejected-Finance 727 SECTOR 22 A CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹7.8 L | L4 | Rejected-Finance not L1 |
| 5 | L5₹7.9 LRejected-Finance 1090 GROUND FLOOR SECTOR 18 C CHANDIGARH | ₹7.9 L | L5 | Rejected-Finance not L1 |
Tender Value
₹9.8 L
EMD Value
₹19,699
Closing Date
20 Jan 2026, 11:00 amClosed
Executive Engineer, Electrical Division, M.C., Chd
Executive Engineer, Electrical Division, M.C., Chd
REPAIR AND MAINTENANCE OF STREET LIGHTS OF V4, V5, MARKET AND PARK LIGHTS IN SECTOR-20 , CHANDIGARH
2026_MCC_90054_1
09/E/MCC/2026
Open Tender
Electrical Works
30 days
REPAIR AND MAINTENANCE OF STREET LIGHTS OF V4, V5
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹19,699
10 Apr 2026
13 Jan 2026
20 Jan 2026
13 Jan 2026
20 Jan 2026
13 Jan 2026
S/E of Collars of CC Collars including following:- a) The box shall be enclosed in a cement collar made form cement concrete 1:2:4 with outside dia. 16”. b) The collar shall be embedded in the ground up to 6” shall stand 9” above ground shall have housed 10” high SMC Box and 6” top over the box. c) The collar shall be provided with 2 PVC Pipes of 40mm dia. and 45cm long to facilitate entry of cables in the Jn.Box. d)n The collar shall be plastered properly finished, curing and painted with 2 coats of snowcem of superior quality. (e) Providing and Fing Junction box of size 250x200x100mm inside dimensions of thermosetting sheet moulding compound material of robust construction with double hinge, side clamp locking arrangement, provision for MCB/Kit installatin provision alongwith connector strip of 30 amps rating suitable for minimum 4x16 sq.mm aluminium cable termination. The junction box should have two numbers PVC Glands with sufficient space for cable entry and loose wires complete in all respect to the best satisfaction of Engg.in.charge.
G.I. Earth pipe electrode with salt/ Charcoal: Supply and laying of earth electrode made out of ISI marked 'B' class G.I. pipe 4.5 Mtr. long 40 mm dia including accessories. GI pipe electrode shall be cut tapered at the bottom and provided with holes of 12mm dia, drilled not less than 7.5 cm from each other upto 2 Mtr. of length from bottom. The earth electode shall be laid in ground after boring as per CPWD specificationscomplete in all respect and to the entire satification of the engineer-in-charge.
P/F 6 SWG GI earth wire in pipe: Providing & laying earth connection from earth bottom of the electrode with 6 SWG dia G.I. wire and from top of the electrode upto pole or pedestal with proper connection with nuts and bolts in 15mm dia GI pipe from earth electrode, as required complete in all respects. The work shall be executed to the entire satisfaction of Engineer-in-Charge.
Painting and Numbering of 7.5/9 mtr long existing street light pole above ground level with two coats of Al. paint of superior quality alongwith single/ double/ triple arm bracket. The job includes cost of labour required for holding the ladder and controlling the traffic while using crane/ boom. Numbering on the pole be done by painting 4" dia round with yellow paint and make number with black paint. The job Includes the cost of labour and all petty material required to complete the job to the entire satisfaction of Engineer in Charge.
Supply & laying of ISI marked 4 core 16 mm sq PVC INSULATED Aluminium armoured cable loose in trench/ pipe:- Supply & laying of ISI marked 4 core 16 mm sq Aluminum conductor armoured cable of make Havell's/ Finolex/ Ecko/ Lapp/ Cirtina/ Polycab/ KEI conforming IS:1554 (Pt.1) amended. The cable shall be laid as per DSR Code 7.1 MV CBPIP (external). The job included all Connections, Commissioning and testing of phase. Supply complete in all respective to the entire satisfaction of the Engineer in charge.
Supply & Erection of DWC pipe 50/63mm with hand bockey:- Supply and laying of 50/63 mm (I/D& O/D) Double Wall Corrugated (DWC) High Density Polyethylene pipe (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm maintenance free, ‘C’ value over 150 with lowest frictional losses, anti rodent, inflammable & good weathering resistance, conforming to IS 14930 (P-II) and PSEN-50086 (P-I & II) of Make Duraline/Rex/Zen duct/Gemini. The pipe should be laid 3 feet below ground/road level with hand bockey without cutting of road for laying cables etc. including cost of digging and refilling of pits complete in all respects to the entire satisfaction of Engineer-in-Charge.DSR CODE 14.15.1
Supply & Laying of DWC pipe 50/63mm with out hand bockey:- Supply and laying of 50/63 mm (I/D& O/D) Double Wall Corrugated (DWC) High Density Polyethylene pipe (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm conforming to IS 14930 (P-II) and PSEN-50086 (P-I & II) of Make Duraline/Rex/Zen duct /Gemini.. The pipe should be laid below ground/road level by digging the ground upto75 cm less excavation or cutting the road/paver blocks upto required level & laying of DWC pipe for laying L.T. (up to 1.1 KV grade) cables etc. including cost of digging and refilling of pits/Trench complete in all respects to the entire satisfaction of Engineer-in-Charge of work.
Providing & Fixing of 10”X12”X4” Size M.S. Junction Box Cover Of 16 Guage M.S. Sheet tapered for protection from water, rubber gasket welded with hinges painted with red oxide primer complete in all respect, including fixing on the existing pole, fabrication as required. The work shall be executed to the entire satisfaction of engineer-in-charge.
Providing and fixing of Pedestal Cover of size 1200x900x350 mm (16 SWG Sheet) with hinges, Paint 2 coat with powder coating , Fabrication, Welding & labour at site All T&P as required to the best satisfaction to the Engineer in-Charge.
Providing and fixing of Pedestal Cover of size 900x600x350 mm (16 SWG Sheet) with hinges, Paint 2 coat with powder coating , Fabrication, Welding & labour at site All T&P as required to the best satisfaction to the Engineer in-Charge.
Dismantling of CC collar and digging of existing loops upto 1 mtr below in kutcha/pakka floor, cutting, dressing and reconnections with thimbles /nuts &bolts complete in the jn.box and lifting any malba from site and dumping at the appropriate place.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
techsummary_110128.pdf
BOQ Comparative Chart
xlsx
finsummary_110128.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.74 MB
BOQ_110128.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid