COMPREHENSIVE MAINTENANCE FOR CIVIL AND E/M WORKS SERVICES IN PINTO PARK AREA AT AF STN PALAM UNDER GE AF PALAM, DELHI CANTT-10

Amount

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc, upto four storey building complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and as directed.

Dismantling of stone slab and tiles of any description or thickness in foor, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) including removal of debrish out of MoD Land complete all as specified and as directed.

M&L for cutting holes in brick/RCC walls or PCC/ RCC steps, built in cement mortar for inserting hold fasts including angle iron (50x50x5)mm for step nosing and 10cm long flat (25x3)mm as hold fast and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as required complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling water tanks exc 250 & n exc 500 Ltrs capacity and removing to contractor's store complete all as specified and as directed.

Taking up or down 15mm bore steel tubing pipe and connections in walls, ceiling, floors, etc including cleaning for refixing complete all as specified and as directed.

Taking up or down 20mm bore steel tubing pipe and connections in walls, ceiling, floors, etc including cleaning for refixing complete all as specified and as directed.

Taking down CI, AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

Description all as per ser item No. 12.00 above but 75/80 mm dia pipes complete all as specified and as directed.

Description all as per ser item No. 12.00 above but 150 mm dia pipes complete all as specified and as directed.

Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area n exc. 1.5 sqm each but complete all as specified and as directed.

Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area exc. 1.5 sqm but n exc 4.0 sqm each complete all as specified and as directed.

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in the same opening after necessary repairing viz shifting of hinges/ tower bolt/handle position etc., complete all as specified and as directed. Note:- The cost of screws, misc items shall be deemed to be included in the quoted rates.

Dismantling of wrough iron mild steel work any type any description not otherwise provided for complete all as specified and as directed.

Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto four storey complete all as specified and as directed.

M&L for brick work with old size sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement morter (1:4), surface finised even and smoth with liqiuid water proofing compound by weight as per manufacture's instructions upto and including four storey complete all as specified and as directed. Note:- WPC shall be measured and paid separately and cost of scaffolding rates shall also deemed to be included in the item.

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, surface finished even and smooth without using extra cement complete all as specified and as directed.

M & L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, slab, chhaja pardi, railing etc, cleaning thoroughly exposed reinforcement, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fix of chicken wire mesh of size (50 x 50)mm of 1 mm dia wire, weight not less than 0.55 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying rendering 10 mm thick plaster in cement mortar (1:3), after second layer 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), to be finished even and fair with water proofing compound by weight as per manufacturer's instructions and removing the debris outside MD land including material and labour for necessary scaffolding and formwork upto (G+3) storeys and safety arrangement complete all as specified and as directed. (Note :- The finish of the surfaces to be matched with the existing surface.)

M&L for preparing plastered or unplastered new surfaces of walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for preparation of surfaces plastered or unplastered new surfaces of walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade over a coat of primer complete all as specified and as directed.

M&L for preparation of new plasterd or unplasterd external wall/ceiling surface and applying two coats of weather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface, sand papering make surface even and smooth for G+3 Buildings complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces of ceilings including brooming down or steel wire brushing, scrapping down and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n. exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, with and including over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Description all as per ser item No. 29.00 above but as in skirtings with and including over 10mm thick plaster in CM (1:4) complete all as specified and as directed.

M&L for non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n. exc. 0.11sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, with and including over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surfaces of size (450x300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match with and including 10mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for vitrified tiles coloured, light shade 10mm thick, area of each tile n exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, with and including over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Description all as per ser item No. 33.00 but as in skirting /dado laid over 10 mm thick bedding layer of CM (1:4) complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, walls, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including over 15mm thick screed bed or bedding layer of cement morar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with and including over 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with and including over 10mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for 16 to 18mm thick green marble slabs (of any type) work (table rubbed and polished) as in steps, risers, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble with and including over 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Making holes on kitchen platform, facilitate to insert gas tubing in appropriate size and shape complete all as specified and as directed.

M&L for factory made chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment with and including over 20mm thick screed bed in cement mortar (1:6) Complete all as specified and as directed by Engineer-in-charge

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base, surface finished even and fair complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size, with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thick M-35 grade with and including laid over 50 mm thick sand cushioning complete all as specified and as directed.

M&L for providing 25mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) complete all as specified and as directed.

M&L for providing 25mm thick precast cement concrete louvres and jallies, type C-0, 1:3:6, set in cement mortar 1:6 (measured solid), in cluding all mould- ings complete all as specified

M&L for cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in copings, window cills, kerb stone for foot path and similar items with plain fair finishing including chamfers, weathering, throating etc and set in CM 1:4 complete joints to match complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, (1:3:6) (using 40mm graded stone aggregate) as in plinth protection, surface finished even and fair complete all as specified and as directed.

S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slabs hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for RCC (Nominal Mix), type B-1, 1:2:4 (using 20mm graded stone aggregate) as in Slabs supported on walls/beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste for formwork to soffits and sides of slabs/ platform or suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

S&F for 500 ltr rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.

S&F ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified and as directed.

Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed.

Description all as per ser item No. 54 here-in-before but 75 mm bore dia pipe complete all as specified and as directed.

All as per item here-in-before but 150 mm bore dia complete all as specified and as directed.

S&F in repairs for PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.

Description all as per ser item No. 57 here-in-before but 75 mm bore diacomplete all as specified and as directed.

Description all as per ser item No. 57 here-in-before but 150 mm bore dia complete all as specified and as directed.

S&F in repairs for PVC junction single, (Single T) equal or unequal, suitable for 100/ 110mm dia of PVC pipes fixed complete all as specified and as directed.

Description all as per ser item No. 60 here-in-before but 75 mm bore dia complete all as specified and as directed.

Description all as per ser item No. 60 here-in-before but 150 mm bore dia complete all as specified and as directed.

S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and as directed.

S&F 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and as directed.

S&F for CI 100mm bends with door complete all as specified and as directed.

S&F for CI 100mm single branch piece with door complete all as specified and as directed.

S&F for CI 75mm bends with door complete all as specified and as directed.

S&F for cast iron cowls 100 mm size complete all as specified and as directed.

S&F in repairs for Cast Iron `P Trap 100mm bore complete all as specified and as directed.

S&F in repairs Cast iron floor trap with CP grating including jointing to waste pipe with run lead, dia of outlet 100mm set in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framing for doors cladding, chowkhats/frame or cooler stand like etc welding hold fast, hinges complete all as specified and as directed.

S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides and covered with decorative face laminated on both side complete all as specified and as directed.

M&L for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered head s for securing glass/wire mesh etc size of member of shutter with sash bar complete all as specified and as directed.

S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.complete all as specified and as directed.

Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed. .

S & F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed

S & F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars complete all as specified and as directed.

S&F in replacement of steel window box type made of ERW hollow section of size 130mm x 65mm x 1.25mm thick double rebate comprises gauged and glazes sekelton shutter ERW Section 50mm x 20mm x 1mm thick double shutter with leaf and arrangments for cooler operning including iron grill bar with 12mm square complete welded to frame with vertical muilon of size 130mm x 65mm with 1.25mm thick ERW box typer including holes cutting holes for hold fast (04 Nos each window) and making good dismantled protion with PCC (1:2:4) type B-1 including following fittings welded to frame / shutter :- (a) Hold fast of 150mm long of flat iron 25mmx3mm made to shape-04 Nos each window. (b) MS Handle cold rolled of size 100mm long - 01 No per leaf (c) MS Tower bolt 100mm long- 02 No per leaf (d) Z-section 20mmx25mm long stopper - 01 No per leaf. (e) MS pintle hinges of size 40mmx25mm -2 Nos per leaf including one coat of red oxide shop primer complete all as specified and as directed. Note:- Wire mesh, sheet glass, painting etc shall be measured and paid separately under respective items.

M&L for 2nd class softwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F for 2nd class softwood Plain fillets. Sectional area exc 13 sq cm and n. exc 25 sq cm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.

Framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 using 12.5mm graded stone aggregate for fixing of hold fasts and clamps etc complete all as specified and as directed.

S & F in repalcement for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc complete all as specified and as directed.

S & F factory made 18 mm (+0.7mm thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company having one side perlaminated and other side plain fixed as in cabinet/ cupborad shutters including provding manufactures test report and test certificate is mandatory with each and every supply of material including taking down of exiting shutter or any kind of PL board or plyboard completed all as specified and directed.

S & F factory made 18 mm (+0.7mm) thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company fixed as in shelves perlaminated/ cabinet/cupboard drawers including provding manufactures test report and test certificate is mandatory with each and every supply of material including taking down of exiting Shenves or any kind of PL board or plyboard completed all as specified and directed.

S & F factory made 5 mm thick PVC sheet of density 600 kg/cum manufactured by an ISO 900-2008 certified company, plain 5 mm thick PVC sheet panelling for back side (wall side) and also manufactures test report and test certificate is mandatory with each and every supply of material including taking down of exiting back side (wall side) or any kind of PL board or plyboard completed all as specified and directed.

S&F for MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.

S & F Continuous (piano) hinges, width of flaps 30mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long complete all as specified and as directed.

S&F for aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F for extruded aluminium alloy cold rolled handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.

S&F for extruded aluminium alloy cold rolled handles, fabricated type, 100 mm size complete all as specified and as directed.

S&F aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and as directed.

S&F aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete all as specified and as directed.

S&F mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etccomplete all as specified and as directed.

S&F for Galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples and welding complete all as specified and as directed.

S&F in repairs for Galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples and welding complete all as specified and as directed.

Supply and fixing for sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane upto 4th storey complete all as specified and as directed.

Description all as per ser item No. 99 but area exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F in repair 25mm/ 30mm dia stainless steel fancy type curtain rods including all fittings and fixture, bracket or wall to wall bracket Lattu complete all as specified and directed.

S&F in repair 25mm/ 30mm dia aluminium powder coated fancy type curtain rods including all fittings and fixture, bracket or wall to wall bracket Lattu complete all as specified and as directed.

Supply only Liquid water Proofing Compound complete all as directed. Make : DR. FIXIT or its equivalent

M&L for preparing plastered or unplastered old surfaces on walls including brooming down or steel wire brushing, scraping down smoke soots etc and applying one coat of oil emulsion distemper white or tinted complete all as specified and directed.

M&L for preparing plastered or unplastered old surfaces on ceiling including brooming down or steel wire brushing, scraping down smoke soots etc and applying two coats of white washing complete all as specified and directed.

M&L for complete removal of existing treatment including preparing old surfaces on walls and applying two coats of distemper oil emulsion white or tinted over a coat of primer, complete all as specified and directed.

M&L for applying 1mm (average) thickness JK/Birla wall care putty over old/New wall plastered surfaces, preparatory to distempering getting even and smooth surface, complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10sq cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Description all as per ser item No. 108 above but not exc 10cm width or girth complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Description all as per ser item No. 111 above but not exc 10cm width or girth complete all as specified and as directed.

M&L for preparation of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface including applying 1mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth and for G+3 Buildings complete all as specified and directed.

M&L for preparation of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying one coat of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface, sand papering make surface smooth and for G+3 Buildings complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and as directed.

Description all as per ser item No. 115 above but except one coat of red oxide primer complete all as specified and as directed.

S&F in reparis for bib taps 15mm bore, cast copper alloy with crutch or butter fly handle, chromium plated, fancy type, screwed down, screws for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in reparis for pillar cock 15mm bore, foam flow chromium plated, fancy type, capstan heads, screwed down high pressure all as specified and directed.

S&F in reparis for Brass CP mixer 15mm for WHB mixing hot & cold water, foam flow chromium plated, fancy type, screwed down high pressure all as specified and directed.

S&F in repairs for stop valves, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs for Angle valve, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs brass chromium plated shower roses 125mm with swivel joints, any size, including minimum 200mm long arms fixing to steel pipe or union all as specified.

S&F in repair PVC flushing cistern of 10 ltrs capacity valveless, syphonic action type, low level, white with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore and connection to pipes etc complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs 32 mm dia PVC waste pipe suitable for waste coupling 32mm/40mm mm dia 1000mm long complete all as specified and directed.

S&F in repair CP towel ring fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair Tubular towel rail, 20mm dia, brass chromium plated, D type, 60cm long between flange including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair sink made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including sink coupling bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe, over all size 495mmx420mm, bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repairs stainless steel plate rack of overall size 600mmx900mm and weight not less than 6 Kgs as approved and complete all as specified and as directed.

S&F in repairs CP health faucet with 1 mtr tube and hook complete all as specified and as directed.

S&F in repair vitreous china squatting pan white Orissa patern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron 'P' trap incl lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and as directed. Make: PARRYWARE/CERA/HINDWARE.

S & F in repair white European water closet set vitreous china including cast iron P' trap incl lime concrete bedding and making good the disturbed portion to match with the existing surface of floor fixed complete all as specified and directed. Make: Cera/Hindware/parryware

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed

S&F wash hand basin vitreous China flat back 550x400mm size white including complete all as specified and directed. Make:Cera/Hindware/Parryware

S&F in repair CP waste coupling 32mm size, fixed to WHB/Sink complete all as specified and directed.

M & L for replacement of MS brackets with 2 Nos 35x35x5mm angle iron and two coats of synthetic enamel paint over one coat of red oxide of required length for placing the WHB/Sink etc including taking down and refixing of existing WHB/Sink etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and as directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Providing & Fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum false ceiling tiles of size 595x595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99%, NRCO.50 TO 0.75 AS PER is 8225:1987, nONCOMBUSTIBLE AS PER bs 476 (PART 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross-T of size 15x32 mm of length 1200 mm and secondary intermediate cross -T of size 15x32 mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2 mm, Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and directed.

S&F for 4mm thick ACP (aluminium composite Panel) sheet fitting wall and roof ceiling (shade and colour as approved by GE) fixed with suitable aluminium section frame (frame min weight not less than 0.6kg/Rm) including material and labour for necessary scaffolding and formwork (upto G+3 storeys) complete all as specified and as directed.

S &F PPGI pre painted galvalume aluminium zinc coating GI based (Tiles Pattern) corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to fix the wall fixed with self taping scrows including removing old sheets as specified .

Welding work upto 4th floor in repairs in any position or any thickness of metal and including cleaning and preparing the surfaces to be welded together and additional piece of metal, if required, holding the members in true position, welding and bevellign of edges as required also including taking down the article and refixing in same position after welding and grinding upto true level complete all as specified and as directed.

Cleaning of PVC over head service tank capacity exceeding 250 liters but not exceeding 500 litres, cleaning by brooming ,removing all dirt ,vegetation grown on roof ,around tank if any, washing the tank with approved bleaching powder rendering it clean to store potable water after applying two coats lime wash internally including writing the date of cleaning and capacity of tank with white synthetic enamel paint (letters not exceeding 30 centi metre height) on the outlet surface directly visible complete all as specified and as directed.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm FRLSH (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with GI saddles GI screws, rawl plugs (concealed conduit/surface wiring in walls and casing capping on ceiling or roof ) including Tee, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screws for mounting switches sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan/exhaust fan point controlled by one Switch. Note :- (i) Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the quoted rate.

Description all as per srl item No. 147.00 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and as directed.

Description all as per srl item No 147.00 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and as directed.

Description all as per srl item No 147.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated FRLSH including earth wire 2.5 Sq mm copper FRLSH conductor cable connected to earth dolly complete all as specified and as directed.

Description all as per srl item No 147.00 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent with cable size 1.5 Sq mm PVC insulated stranded sheathed copper conductor complete all as specified and as directed.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm FRLSH (Nominal area) drawn through and including non metallic rigid PVC casing cand capping of suitable size for wiring in ceiling and roof including Tee, GI screw, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screws for mounting switches sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan/exhaust fan point controlled by one Switch. Note :- (i) Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the quoted rate.

Description all as per srl item No. 152.00 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and as directed.

Description all as per srl item No 152.00 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and as directed.

Description all as per srl item No 152.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated FRLSH including earth wire 2.5 Sq mm copper FRLSH conductor cable connected to earth dolly complete all as specified and as directed.

Supply and fixing switch piano flush type 5 Amps, single pole one way complete all as specified and as directed.

Supply and fixing socket out let 3 pin 5 Amps, flush type complete all as specified and as directed.

S&F switch piano flush type single pole one way 15 Amps complete all as specified and as directed.

Supply and fixing socket outlet 2 in 1, 3 pin 5/15 Amps, flush type complete all as specified and as directed.

Supply and fixing switch socket combination, multistranded 2 in 1, 6 and 16 Amps, flush type complete all as specified and as directed.

S&F of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engr-in-Charge.

S&F of electric bell, multi music type, 230 volt AC, single pole, complete, all as specified and as directed by Engr-in-Charge.

S&F of bell push 5 Amps flush type complete all as specified and as directed by Engr-in-Charge.

S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed by Engr-in-Charge.

Supply and fixing stepped type fan regulator 300 watt, 230 volts, 50 Hz, AC supply complete all as specified and as directed.

S&F in repair Trim Clipon LED panel round 24 watt 6500K unique slimmest recess cum surface panel and including providing and connecting up with twin core copper conductor cable complete all as specified and as directed. complete all as specified and as directed.

S&F indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and as directed.

S&F in replacement LED Bulb B22 base 12 W 230V 50Hz any colour complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 ways double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing in replacement of vertical type load line distribution board, double door, 4 way, AC, 3 phase, 415 volts, TPN bus bar 200 Amps rating and earth bar & din rail complete all as specified and as directed.

S&F MCCB, 4 pole 125 Amp, 16kA, 415 Volts complete with connections complete all as specified and as directed.

S&F MCB, SPN 63 Amp, 10kA complete with connections complete all as specified and as directed.

S&F MCB, SPN 40 Amp, 10kA complete with connections complete all as specified and as directed.

S&F MCB, SP 6-32 Amp, 10kA complete with connections complete all as specified and as directed.

S&F MCB, SP 40 Amp, 10kA complete with connections complete all as specified and as directed.

Material and labour for submain wiring with 2 run of 2.50 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one run of 2.50 sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

Material and labour for submain wiring with 2 run of 6.0 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one run of 6.0 sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

S&F PVC insulated service cable flat or rounded sheathed, multistranded conductor 1100 volt grade of size 10 sqmm 2 core complete all as specified and as directed.

M&L for earthing complete for building with galvanized mild steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed.

S&F round shape 12 watt 220 volt AC recessed type with high efficiency PMMA soft glare free light complete with drivers, holders, LED lamp suitable for roof/ ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement of LED recessed mounting square slim down lighter 18 Watt for AS / GB / POP ceiling 197 x 197mm size complete with driver internally pre wired and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and as directed.

Disconnect the electric supply and taking down carefully pre paid meter from existing postion and refixing the same including S&F in replacement of Thermoplastic (Polycarbonate/ Polystyrene), IP65 as per IEC 60529, corrosion proof, suitable for Meter box lid screws made of stainless steel V2A, internally embedded gasket for lid and enclosures, metric size knock outs for cable entry from top and bottom with transparent Hinged lid. DB should be able to adapt any make of MCB or din mountable equipment and tested as per as IEC 60439-3, fit for the new standard IEC 60 364-4-41, glow wire test IEC 695-2-11: 750C, flame retardant, self extinguishing protection against mechanical load IK 08 (5Joule) in accordance with IEC 62262 and enclosure dimension should be 271x253x115mm(LxBxH). Makes: Hensel cat No KG 9003 or equivalent/ Schneider meter box. Note:- Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the quoted rate.

M/S PRADEEP ENTERPRISES (BID ID -3314127)

JAIPAL AND BROTHERS (BID ID -3304858)

DEV CONSTRUCTION (BID ID -3314210)