8839/E8

Amount

Demolition Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc, but excluding Ashlar Facings, dressed Stone Work and Pre-cast Concrete Articles of any descriptions, complete all as specified and as directed.

Taking down shutters of any description n. exc. 1.00 Sqm each and refixing in same opening after repairing complete all as directed by Engineer in charge.

Taking down shutters of any description exc 1.00 sqm but n. exc. 2.00 Sqm each and refixing in same opening after repairing complete all as directed by Engineer in charge.

Taking down shutters of any description exc. 1.00 Sqm but n.exc 2 Sqm each and removing from site or to store as directed by Engineer in charge.

Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm and n.exc 4 Sqm each complete all as specified and directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debris/ rubbish, etc., complete all as specified and as directed.

Taking down Steel window and Ventilators of n.exc 1.5 Sqm including Grill/Guard Bars etc (upto 04 storied of building) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Dismantling wrought iron or mild steel work viz steel window, ventilator, guard bars etc of any description not otherwise provided for complete all as specified and directed.

M&L Plain Cement Concrete type C-1, (1:3:6) (40mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed.

M&L Brick work with fly ash bricks designation 75 (kgf/cm2) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Material and labour Chipping of unsound/weak concrete materials of 30mm average thickness from slabs/chajja/ fin fascia with standard power driven percussion type or pneumatic chiesel of standard make including tapering all edges, making square shoulders of cavities etc upto any height including necessary scaffolding and safety measures complete all as specified and as directed by the Engr-in-Charge..

Material and labour Cleaning of exposed concrete surfaces of lightly sticking materials including foreign materials, loose concrete/ aggregate etc and disposal of all debris upto distance of 50 m and applying single coat of epoxy bond adhesive on prepared non metallic surfaces (existing surface) by using brush as per manufacturers instruction / specification upto any height of building complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal conchem/ Sika/ Hindcon Chemicals Ltd

Supply and Application Two component structural grade polymer modified reinstatement mortar where local spalling has taken place or shuttering is not possible. The Mortar can be applied from a minimum of 25mm average thickness in smaller vertical pockets and upto 100 mm thickness in horizontal applications. The Mortar should have a minimum compressive strength 12 N/mm² in 1 day and 45N/mm² in 28 days. Minimum Flexural strength should be 8 N/mm² in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementitous systems to be mixed with cement slurry before the application of microconcrete to be used @ 6 lit/bag of cement. The bonding agent should have minimum compressive strength 24 N/mm² Minimum Tensile strength 3.5 N/mm², Minimum Flexural Strength 6.5 N/mm² complete all as specified and as directed by the Engr-in-Charge upto any height of building including necessary scaffolding and safety measure. Make : Fosroc/Elantas beck/Kunal conchem/ Sika/ Hindcon Chemicals Ltd

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Plain Colour Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed.

S&F for 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.complete all as specified and directed.

M&L Second Class Hardwood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to chowkhats complete all as specified and directed.

S&F Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

S&F Stainless Steel Butt Hinges size of Hinges 100 mm (medium weight) and fixed, complete all as specified and as directed

S&F Mild Steel Butt Hinges, size of Hinges 75mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed

S&F Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed

S&F Aluminum anodized, barrel tower bolts of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F Aluminum anodized, barrel tower bolts of extruded section, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F in repair Aluminum anodized, barrel tower bolts of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F in repair Aluminum anodized, barrel tower bolts of extruded section, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F Aluminum anodized, handle of extruded section, 100 mm long and fixed with steel screws complete all as specified and directed.

S&F Aluminum anodized, handle of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F in repair Aluminum anodized, handle of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F 300 mm long Aluminum alloy, anodized, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminum alloy and fixed, complete all as specified and as directed.

S&F in repair 300 mm long Aluminum alloy, anodized, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminum alloy and fixed, complete all as specified and as directed.

S&F 100 mm hasp and staples of alunimium anodised, safety type including bolt to hinges plate and fixed with screws complete all as specified and as directed.

S&F in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.

M&L Welding not exc 2.5 cm in length to steel windows, doors or any steel members not exc 6 cm thick as in repair complete all as specified and as directed.

S&F Fancy type, Powder coated 20/25 mm dia of drapery rod fixed in position as in repair complete all as specified and as directed

S&F Bracket for fixing Fancy type,Chromium Plated 20mm dia curtain rod/ drapery rod etc as in repair complete all as specified and as directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work complete all as specified and directed.

M&L Mild Steel Flat Iron 25 x 3 mm, as in Holdfast for Door, Window Frames or Chowkats etc., cut to length or drilled hole and fixed with Screw, etc., grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.

Supply and fix in repair aluminium anodised (powder coated) Three track sliding window frame with shutters with ( 2 nos glazed and one wire gauzed shutter)including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter (A) Sections for shutter (i) 'H' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick (B) Section for frame (i) Top & Sides 123 X 29.70X 1.50mm not less than 1.30 Kg /RM (ii) Bottom 123 X 29.70 X 1.50mm not less than 1.502 Kg /RM complete all as specified and directed .

S&F steel window with side hung shutter including projection type hinges with steel handles, and steel peg stay with glazing bars dovetailed or welded complete all as specified.

S&F steel window with side hung shutter including projection type hinges with steel handles, and steel peg stay without glazing bars dovetailed or welded complete all as specified.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

M&L Prelaminated particle board 18/19mm thick as in cup board shutter and Shelf, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works including taking down old unserviceable particle board complete all as specified and as directed.

M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, including demolition of old unserviceable tiles, complete all as specified and as directed.

M&L for 5 mm thick rendering on brick or concrete surfaces of wall in CM 1:3 and finished even and smooth without using extra cement complete all as specified & directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and smooth without using Extra Cement complete all as specified and as directed.

M&L 20 mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete external surfaces in two layers (each 10mm thick) finished even and smooth without using extra cement using water proofing compound on top layer as per manufactures instruction on external wall surface upto height of 4th storied bldg complete all as specified and directed. Note : WPC shall be measured and paid seperately

"Supply only" liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L Preparing new Surfaces of Ceilng and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of white wash complete all as specified and as directed.

M&L Preparing old decorated Plaster Surfaces of Ceiling and applying One Coat of white wash complete all as specified and as directed.

M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of oil bound distemper (any colour /tint) complete all as specified and as directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer over 1.5 mm thick wall care putty (Birla/Asian) on wall surfaces including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1.5mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

S&F Figured Glass 3.0mm thick, Pin Head / frosted type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

M&L Preparing old decorative Surfaces of walls and applying one Coat of cement base paint complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as specified and as directed.

M&L Preparing old decorated plastered surfaces of Walls and applying One Coats of Exterior Emulsion Paint Weather Coat (any colour /tint) (as per Manufacturer’s instructions), complete all as specified and as directed.

M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion Paint Weather Coat over a coat of alklai resistance Primer (as per Manufacturer’s instructions), complete all as specified and directed.

S&F in repairStainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel plaint over a coat of red oxide all as specified and directed by Engineer-in-Charge.

Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old unserviceable tubes and deposit to store complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old unserviceable tubes and deposit to store complete as all specified and as directed.

Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old unserviceable tubes and deposit to store complete as all specified and as directed.

M&L for taking down and refixing of old Steel Water Tubing 15mm Bore (dia), and connections with all new Fittings such as bends, elbows, tees, short pieces, connectors, back nut, reducer, diminishing pieces, caps, unions and plugs etc but except Steel tube connection, in new or old position such as fixed on Walls, Ceiling or laid in Floors or any other Situation, cleaning the same or deposit to store complete as all specified and as directed.

M&L for taking down and refixing of old Steel Water Tubing 20mm Bore (dia), and connections with all new Fittings such as bends, elbows, tees, short pieces, connectors, back nut, reducer, diminishing pieces, caps, unions and plugs etc but except Steel tube connection, in new or old position such as fixed on Walls, Ceiling or laid in Floors or any other Situation, cleaning the same or deposit to store complete as all specified and as directed.

M&L for taking down and refixing of old Steel Water Tubing 25mm Bore (dia), and connections with all new Fittings such as bends, elbows, tees, short pieces, connectors, back nut, reducer, diminishing pieces, caps, unions and plugs etc but except Steel tube connection, in new or old position such as fixed on Walls, Ceiling or laid in Floors or any other Situation, cleaning the same or deposit to store complete as all specified and as directed. Note for item no. 72.00 & 74.00:- (i) Steel tube retrived from taking down item or issue from store shall be reused. (ii) Serviceable steel tube obtained shall be reused after cleaning. (iii) Un-serviceable steel tube shall be deposited to store. The same shall be the property of contractor and take over by contractor through Schedule of Credit.

S&F Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min weight 15mm-120gms) as in repair complete all as specified and directed.

S&F Angle stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-90gms) with PTMT flange as in repair complete all as specified and directed.

S&F Bip tap with nozzle 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight15mm-95 gms) as in repair complete all as specified and directed.

S&F Towel rail 600mm long of PTMT with chromium plated brass screws and wooden/plastic cleats minimum weight 190 grams as in repair complete all as specified and directed.

S&F PTMT Grating Doom of 140mm size (Min weight 50 grms) and fixed-in-repairs, complete all as specified and as directed.

S&F PTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed.

S&F PTMT Ball Valve 25mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed.

S & F in repair for Waste fittings (coupling) 32mm bore of PTMT for steel sinks, basins, urinal etc with long screwed shanks and fly-nuts and washer complete all as specified and directed

S&F 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm for any type/make/size for stainless steel sinks, basins,urinal etc as in repair complete all as specified and directed.

S&F 32mm dia PVC flush pipe of low or high density polyethylene pipe fixed to low level flush cistern including all necessary fixing arrangement as in repair complete all as specified and directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including PTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball and Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including PTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball and Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

S&F in repairs Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm etc incl 40mm dia waste pipe complete including taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

S&F in repair stainless steel utencil plate rack (size 900 x 1200 x 200 mm) using 1.0mm thick sheet with all fittings accessories complete as directed.

S&F Chromium Plated waste coupling heavy full thread 32mm (brass) fixed to stainless steel sink including necessary fixing arrangement as in repair complete all as specified and directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cover (coloured) fixed with mild steel chromium plated or aluminium hinging device including taking down old unserviceable one complete all as specified and as directed.

S&F in replacement Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed.

Repair to PVC flushing cistern including cleaning and replacement of washers and syphon system, if required and making all necessary connections complete as directed.

S&F PVC connection pipe 15mm size with PTMT nuts of length 600mm long as in repair complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 but not exc 500 liters setting aside (or lowering, hoisting if required) for repairs & scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of PVC/RCC water storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required and removing vegetation around the over head tank after opening tank cover, inlet, outlet etc and reconnecting with GI/CPVC tubing and re-fixing in position ,refixing the tank including cover after cleaning in position , write date of cleaning by synthetic enamel paint on tank complete all and specified and directed.

Disconnecting existing tanks of capacity exc 500 but not exc 1000 liters setting aside (or lowering, hoisting if required) for repairs & scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of PVC/RCC water storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required and removing vegetation around the over head tank after opening tank cover, inlet, outlet etc and reconnecting with GI/CPVC tubing and re-fixing in position ,refixing the tank including cover after cleaning in position , write date of cleaning by synthetic enamel paint on tank complete all and specified and directed.

Disconnecting existing tanks of capacity exc 1000 but not exc 2000 liters setting aside (or lowering, hoisting if required) for repairs & scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of PVC/RCC water storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required and removing vegetation around the over head tank after opening tank cover, inlet, outlet etc and reconnecting with GI/CPVC tubing and re-fixing in position ,refixing the tank including cover after cleaning in position , write date of cleaning by synthetic enamel paint on tank complete all and specified and directed.

S & F in repair PVC tank lid/cover for water storage tank capacity of 250 to 2000 ltrs to matching with existing tank with fixing arrangement complete all as specified and directed.

Cutting/uprooting of tree from walls of bldgs. up to extended root and spraying of acid of required qty at any location of bldg up to 4 storied & making good disturbed surfaces with CM 1:4 or cement concrete (1:3:6) type C1 using 20mm graded aggregate including necessary scaffolding/ through rope with safety belt for size of tree of girth 5 to 10 cm complete all as specified and as directed by Engr -in-charge.

Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets, light fittings etc. and making good distrubed surfaces of walls, floors, etc. including cleaning all and specified and directed.

M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FRLH/S in and including concealed PVC conduit 20 mm dia medium duty ISI marked with all necessary fittings for like modular steel box, cover plate and frame for mounting switches including 1.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan/bell controlled by one switch complete including cutting, chasing the surface and then making good the same in CM 1:3 to finishing the match surface complete all as specified and directed by Engr- in-charge.

All as per item No.104.00 mentioned here-in-before but 3 pin 5 amps socket out let point same board with other switches of cables of 1.5 sqmm

All as per item No.104.00 mentioned here-in-before but for one 5 amp switch socket combination on independent board with cables of 1.5 sqmm size

All as per item No.104.00 mentioned here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly complete all as specified and directed by engineer incharge.

M&L for point wiring with PVC insulated unsheated stranded copper conductor cable FRLH/S of size 1.5 sq mm in and including PVC casing caping of required width including modular steel box, cover plate and frame for mounting switches including 1.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan controlled by one switch, one way complete all as specified and directed by Engineer incharge.

All as per item No.108.00 mentioned here-in-before but 3 pin 5 amps socket out let point same board with other switches of cables of 1.5 sqmm

All as per item No.108.00 mentioned here-in-before but for one 5 amp switch socket combination on independent board with cables of 1.5 sqmm size

All as per item No.108.00 mentioned here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed by Engineer-in-Charge.

All as per item No.108.00 mentioned here-in-before but using 4 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board or for AC Starter including 4 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed by Engineer-in-Charge.

S&F in repair lamp holder insulated body with back plate for batten fittings complete all as directed.

S & F switch piano modular flush type 5/6 Amps 230V AC one way complete all as specified and directed by Engineer-in-Charge, Make :- Indo asian Cat No 800000 or equivalent

S & F in repair switch piano modular flush type 5/6 Amps 230V AC way complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800000 or equivalent as per list of makes.

S & F in repair switch piano modular flush type 6/10 Amps two switch for two way 230V AC complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800001 or equivalent as per list of makes.

S&F modular socket outlet 3 pin 5/6 Amps 230 volts 2 module flush type. complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat No.801800 or equivalent as per list of makes.

S&F in repair modular socket outlet 3 pin 5/6 Amps 230 volts 2 module flush type complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.801800 or equivalent as per list of makes.

S & F switch piano modular flush type 16 Amps 230V AC complete one way 1 module complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800002 or equivalent as per list of makes.

S & F in repair switch piano modular flush type 16 Amps 230V AC complete one way 1 module complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800002 or equivalent as per list of makes.

S&F modular bell push flush type 5 Amps 1 module complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800007 or equivalent as per list of makes.

S&F in repair modular bell push flush type 5 Amps 1 module complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800007 or equivalent as per list of makes.

Fixing only modular one/ two way switches, socket outlet and bell push of 1 module and of any capacity complete all as specified. Note:- Serviceable switches and socket outlet shall be obtained from from taking down item mentioned here-in-before.

S&F modular socket outlet multipurpose 3 pin 15/16 Amps 2 modulecomplete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800002 & 800022 or equivalent as per list of makes.

S&F in repair modular socket outlet multipurpose 3 pin 15/16 Amps 2 module complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800002 & 800022 or equivalent as per list of makes.

S& F modular electronic step type fan regulator by step type 230 volt 1 module complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800043 or equivalent as per list of makes.

S& F in repair modular electronic step type fan regulator by step type 230 volt 1 module complete all as specified and directed by Engineer-in-Charge. Make: Indo Asian Cat Part No.800041 or equivalent as per list of makes.

Fixing only modular switch socket outlet and fan regulator of 2 module and of any capacity complete all as specified. Note:- Serviceable switch socket outlet and fan regulator shall be obtained fromfrom taking down item mentioned here-in-before.

S&F call bell, ding dong AC 230 volt single pole (ding dong type) complete all as specified and directed by Engineer-in-Charge.

S&F in repair call bell, ding dong AC 230 volt single pole (ding dong type) complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface bakelite 65x50mm single phase complete all as specified and directed by Engineer-in-Charge.

S&F in repair ceiling rose surface bakelite 65x50mm single phase complete all as specified and directed by Engineer-in-Charge.

S&F switch socket combination with box 2in 1 3 pin 6 Amps 230 volts flush type complete all as specified and directed by Engineer-in-Charge.

S&F switch socket combination with box multipurpose 3 pin 10 and 20 Amps one switch complete all as specified and directed by Engineer-in-Charge.

Fixing only swithes, switch socket combination, ceiling rose, call bell and lamp holder of any capacity complete all as specified. Note:- Serviceable swithes, switch socket combination, ceiling rose, call bell and lamp holder shall be obtained from from taking down item mentioned here-in-before.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S & F LED bulb 9Watts 240V 50Hz 6500K b22 base with bulb holder insulated body with back plate complete all as specified and directed by Engineer-in-Charge.

Supply and fix Decorative wall light fixture Stainless steel finish with diffuser, suitable for 9 W retrofit LED Lamp B22 base complete with all the connection complete all as specified and directed by Engineer-in-Charge. Make: Cat Part No :-WALL GLOWF of Crompton or equivalent

Supply and fix plug top 3 pin16A 240V Easy to carry, Non flammable & Durable Heavy duty , nickel plated brass terminals Long lasting polycarbonate plastic material complete all as specified and directed by Engineer-in-Charge.

S&F in replacement plug and socket in sheet metal enclosures with two pin and earth plug and socket complete with and including MCB SP 20 Amps 240 volts heavy duty all as specified and as directed by Engr-in-charge.

S&F A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top with six modular box including frame and cover plate complete all as specified and directed by Engineer-in-Charge.

S&F in repair A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top with six modular box including frame and cover plate complete all as specified and directed by Engineer-in-Charge.

S&F sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls complete for 2 modules including taking down of old unsv one and making good to disturbed surface of war as per existing finish complete all as specified and directed by Engineer-in-Charge.

All as per item No.144.00 mentioned here-in-before but for 3 modules

All as per item No.144.00 mentioned here-in-before but for 6 modules

All as per item No.144.00 mentioned here-in-before but for 8 modules

S&F modular cover plate with frame for fixing of modular switches/sockets complete for 2 modules complete all as specified and directed by Engineer-in-Charge.

All as per item No.148.00 mentioned here-in-before but for 3 modules

All as per item No.148.00 mentioned here-in-before but for 6 modules

All as per item No.148.00 mentioned here-in-before but for 8 modules

Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed.

S&F MCB TPN DB made up with sheet metal, phosphorised, power coated, neutral link, earth bar and din rail, 8 way TPN with 200 amps rated bus bar, 415 volts complete all as specified and as directed.

S&F sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified.

S&F isolator 63 Amps 415 Volts FP with rapturing capacity 10KA including taking down of old one complete all as specified and directed by Engineer-in-Charge.

S&F MCB 6 to 32 amps 240 volts 10KA single pole 'C' - Curve complete all as specified.

Fixing only MCB 6 to 32 amps 240 volts 10KA single pole 'C' - Curve complete all as specified. Note:- Serviceable MCBs shall be obtained from ifrom taking down itemof MCBs/DBs mentioned here-in-before.

S&F in repair MCB 6 to 32 amps 240 volts 10KA single pole 'C' - Curve complete all as specified.

S&F MCB DP 40 to 63 amps 240 volts 10KA breaking capacity complete all as specified.

Fxing only MCB DP 40 to 63 amps 240 volts 10KA breaking capacity complete all as specified. Note:- Serviceable MCBs shall be obtained from taking down itemof MCBs/DBs mentioned here-in-before.

S&F in repair MCB DP 40 to 63 amps 240 volts 10KA breaking capacity complete all as specified and directed by Engineer-in-Charge.

S&F sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 10 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 10 sqm as earth lead drawing into rigid non metalic PVC conduit of size 25mm dia including taking down old unsv complete all as specified. Note: Two run of 10 sqmm cable and one run of 10 sqmm cable will be measured as single length.

Taking down and opening out the ceiling fan/wall mounted upto1200/1400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots complete including materials like split pin, rubber reel etc and reassembling and refixing of fan complete with and including minor Spares, if any required complete all as specified and as directed. Note : Spare parts shall be measured & paid separately.

Rewinding of ceiling fan motor with super enamelled copper winding wire of suitable size & varnishing including testing of fan after rewinding complete all as specified.

Supply only ball bearing suitable for 1200/1400mm sweep Ceiling fan of any make.

Supply only capacitor of 2.5 mfd for Ceiling Fan

Supply only gun metal bush of suitable size for ceiling fan of sweep 1200mm/1400mm as per existing one complete.

Supply only shafts for ceiling fan suitable for 1200mm sweep

Supply only PVC connector for Ceiling Fan

Supply only fan blades for Ceiling fan suitable for 1200mm sweep/1400mm sweep.

Supply only nuts, bolts, for Ceiling fan

M&L for painting of ceiling fan/wall fan/exhaust fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc complete all as specified and directed by Engineer-in-Charge.

Taking down and opening out the exhaust fan upto 400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots rubber reel etc. reassembling and refixing of fan complete including all as specified and as directed.

Rewinding of fan motor with super enamelled copper winding wire of suitable size & varnishing including testing of fan after rewinding complete all as specified.

M&L for painting of exhaust fan of any size and sweep complete, in situ with approved colour synthetic enamel paint by spraying including filling with cavities with filler, one coat after cleaning all dust etc.

Supply only bush suitable for exhaust fan.

Supply only ball bearing suitable for exhaust fan.

Supply only capacitor 2.5 mfd for exhaust fan.

Taking down carefully unserviceable geyser of any type and make from site after disconnections of water & electrical connections & carrying out to MES store yard for inspection and thereafter to workshop for repair & replacement of components such as heating element, thermostate, cable, neon lamp, plugtop, outer casing, plates & repair work to apparatus plate, copper tank,split plate including de-scaling of water tank etc and carrying back to MES store yard for testing and refixing at site and making water & electrical connection on completion and all as directed.

M&L for painting of geysers 25 ltrs at site/at workshop duly with one coat of synthetic enamel paint (white) including preparation of surfaces with brush, cleaning agents as required of 25 Ltr capacity and its front with best quality paint all as directed and specified by Engr-in-Charge

M&L for brazing/gas welding of inner container copper of 25 ltrs /50 ltrs capacity and any make and making leak proof all as directed.

Supply only following spares for geysers:- Heating element 1.5KW including rubber gasket ISI marked suitable for existing geysers.

Heating element 2.00KW including rubber gasket ISI marked suitable for existing geysers.

Thermostate for suitable existing geyser of 25/50 litrs capacity

Stainless steel threaded geyser connection pipe of length not less than 60cm including washers for incoming & outgoing hot & cold water connections as specified and directed by Engr-in-charge

Apparatus plate assembly complete for geyser of capacity 25/50 litrs capacity.

Outer casing made out of 22 SWG MS sheet suitable for geyser of capacity 25 litrs.

Storage tank fabricated from copper sheet gauge suitable for geyser of capacity 25 ltrs of make as specified and approved.

Split plate bottom cover made out of 22 SWG MS sheet suitable for 25 litrs capacity geyser

Split plate top cover made out of 22 SWG MS sheet suitable for 25 litrs capacity geyser

Insulating material glass wool

Element holding brass stud

Element holding MS clamp

Fusible metal plug

Neon lamp round/square with connection lead

Non return valve for geyser inlet

Brass Pressure Reducing valve for geysers 25 ltrs as per site requirement.

Supply and fix in repair electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, 3 Phase, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete as directed. Note:- Unserviceable meters shall be deposited to MES yard.

Supply and fix in repair electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete as directed. Note:- Unserviceable meters shall be deposited to MES yard.

SK CONSTRUCTION SYNDICATE & ENGG CO (BID ID -3486423)

SPS TRADING (BID ID -3486974)

DGR CONSTRUCTION (BID ID -3486550)