SMART PERIODICAL SERVICES (EXT) AND ALLIED WORKS IN THE AOR OF AGE BR-II UNDER GE(WEST)PATHANKOT

Amount

M&L for preparation of newly plastered surfaces with machnical wall sander (having mechanical vacuum machanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7'' /9'' to make the surface ready for applying primer/paint etc by skilled labour complete all as directed.

M&L for complete removal of existing treatment by scrapping with machnical wall sander (having mechanical vacuum machanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7'' /9'' to make the surface free from dust, loose paint etc by skilled labour complete all as directed.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 ltr ( undiluted)/10sqms dilluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for preparation of primer surfaces of wall and applying two coats of water based prermium acrylic smooth exterior (weather proof/weather coat) of approved colour with silicon additive & colour stay technology, excellent dirt pick up resistance with low VOC less than 50 Gram/Litre as per LEEDS specifications having anti algai properties in two coats @ 1.79 litre (Undiluted)/10 sqm diluted with water as per manufacturers instructions applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Note : Subsequent coat of painting shall be done after allowed 6 to 8 hrs to dry the painted surface. Note : (a) The work shall be executed from authorised applicator of make approved by Garrison Engineer, (b) Colour of Exterior Emulsion paint shall be approved by Garrison Engineer.

M&L for preparation of old surfaces of wall and applying two coats of water based prermium acrylic smooth exterior (weather proof/weather coat) of approved colour with silicon additive & colour stay technology, excellent dirt pick up resistance with low VOC less than 50 Gram/Litre as per LEEDS specifications having anti algai properties in two coats @ 1.79 litre (Undiluted)/10 sqm diluted with water as per manufacturers instructions applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Note : Subsequent coat of painting shall be done after allowed 6 to 8 hrs to dry the painted surface. Note : (a) The work shall be executed from authorised applicator of make approved by Garrison Engineer, (b) Colour of Exterior Emulsion paint shall be approved by Garrison Engineer.

M&L for preparation of old surfaces of wall and applying one coats of water based prermium acrylic smooth exterior (weather proof/weather coat) of approved colour with silicon additive & colour stay technology, excellent dirt pick up resistance with low VOC less than 50 Gram/Litre as per LEEDS specifications having anti algai properties in two coats @ 0.9 litre (Undiluted)/10 sqm diluted with water as per manufacturers instructions applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Note : Subsequent coat of painting shall be done after allowed 6 to 8 hrs to dry the painted surface. Note : (a) The work shall be executed from authorised applicator of make approved by Garrison Engineer, (b) Colour of Exterior Emulsion paint shall be approved by Garrison Engineer.

Note for item No. 3 to 6 :- (a) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials i.e Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 2 to 3 story height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of approved manufacturer and also with their applicator alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have vaild authrosation letter from the manufacturer (minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The suthorisation letter needs to be vaild for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before appling primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit 05 years warranty in Non-judicial stamp paper/ approved company card at the time of submission of RAR & Final Bill.

M& L for preparing old plaster or unplastered wall surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke soot, moulds and effloresent salts and treating oily and greasy spots etc and applying one coat of Premium water proof cement paint for external services without any brush marks on the surfaces complete all as specified and directed.

All as per ser item 07 here-in-before but of 02 coats complete all as specified and directed.

M& L for preparing old plaster or unplastered wall surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke soot, moulds and effloresent salts and treating oily and greasy spots etc and applying one coat of colour wash without any brush marks on the surfaces complete all as specified and directed. Note : All painted areas site to be cleaned and hand over as earlier without any extra cost to Govt.

M& L for preparing old plaster or unplastered wall surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke soot, moulds moss and effloresent salts and treating oily and greasy spots etc and applying two coats of white wash on wall complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed.

M&L for preparing Old or New Treated Surfaces (Base Area for Writing Letters or Figures) and applying One Coat of Synthetic Enamel Paint on Plastered or Concrete Surfaces of Walls, complete all as specified and as directed.

M&L for writing Letters or Figures (Block, Roman, Italic of Indian), etc. with Synthetic Enamel Paint, Height exc. 10 Cm and not exc. 20 Cm, complete all as specified and as directed.

M&L for writing Stops, Commas, Short Lines, Dashes, Hyphens, Brackets, etc. with Synthetic Enamel Paint, complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified.

M&L for 15mm thick rendering in Cement Mortar 1:4 on External Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even, complete all as specified and as directed.

Dismantling loose/disintegrated portion of RCC Chajjas, bends shelves, beams balconies and similar work at any position or any height and doubing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrisove paint on exposed surfaced and provision of necessary supports form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

Demolition of re-inforcment cement concrete of any description and in any position, complete all as specified and directed.

M&L for reinforced cement concrete (1:1½:3) type A-1 (using 20mm graded crushed stone aggregate) in Chajja, parapet wall and lintel complete all as specified and directed.

S&F TMT bars 10 mm dia and over cut to length, bent to shape as required incl cranking bending hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and as directed.

S&F TMT bars 6 to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L Formwork to chajja and similar work; Flat,rough finished surface of concrete,complete all as specified and as directed.

M&L cutting/up-rooting/removing of Trees growth on Walls, Chajjas and cleaning effected Area not exc. 3.00 Sqm Each Patch and Making Good the area with Rendering 15mm thick in Cement Mortar 1:4, mixing with WPC and spray of Chemical (GLYCEL) for destroy of roots as per Manufactare instructions, complete all as specified and as directed.

Note :-Item No 1 to 23 (The cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double/triple storey building as directed by Engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible extra for this.)

GANDOTRA CONSTRUCTION CO (BID ID -3158249)

dadwal engineers (BID ID -3152213)

VAISHNAVI BUILDERS (BID ID -3153161)