Special Repair of Govt. Senior Secondary School at Kalbog in Tehsil Kotkhai, Distt. Shimla, H.P.

Amount

Earth work in excavation by mechanical means (hydraulic excavator)/ Manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including gettinf out the excavated soil and disposal surplus excavated soil as directed, within a lead of 50m all kind of soil.including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Centering and shutttering including strutting propping etc. and removal of from for : Columans, Pillars , Pires Abutments , poste and and Struls. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

providing and laying fixing 2nd class teak wood plain ;ining Tongued and grooved, including wooden pluge complere with necessary screws and priming coat on unexposed, surface 25mm thick .including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level : 1:2:4 (1cement :2 coarse sand) :4 graded stone aggregate 20mm nominal size).including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level : 1 : 5 : 10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size).including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Stone soling properly hand packed filling interstices with kharanja stonesand and consolidating with power road roller to the requested gradient and cambor including spreading watering and rolling of binding materials moorum or earth ect. Complete as per HPPWD specifications.including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge..

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level 1:3:6 (1 cement ; 3 coarse sand) : 6 graded stone aggregate 20mm nominal size).including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

providing and laying Ceramic glazed floor tiles of size 3020x300 mm of brand Orient Bell, Nitco Ltd, Kajaria, Johnson Tiles (thickness to be specified by the manufacturer) of 1st quality conforming to IS ; 15622 of approved make in colours such as white, lvory, Grey, Fume Red Brown laid on 20 mm thick cement mortar 1;4 (1Cement ; 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc, complete.including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing water closet squatting pan (Indian type W.C . Pan ) with 100 mm sand cast iron p or S trap, 10 litre low leval white p.v.C flushing cistern, including flush pipe , with manually controlled device (handle lever0 conforming to IS :7231, with all fitting and fixtures complete, including cutting and making good the walls and floore wherever required; White Vitreous ching orissa pattern w.c pan of size 580x440 mm with integral type foot reste.including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing white vitreouse china pedestal type water closet (European type) with seat and lid. 10 litre low level white vitreous china flushing cistern & C.P flush bend fitting & C.I brackets, 40mm flush bend, overflow arrangement with specials of standrd make and mosquito proof coupling of approved municipal design complete, incliding painiting of fittings and brackets, cutting and making good the walls and floore wherever required W.C pan with ISI marked white solid plastic seat and lid.including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing wash basin with C.I brackets . 15 mm C.P brass pillare 32 mm c.P brass waster of standary pattern, including painiting of fittings and brackets, cutting and making good the walls wherever require ; white Vitreouse china wash basin size 630x450 mm with a pair of 15 mm C.P brass pilar taps.including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing white vitreouse china pedestal for wash basin completely recessed at the back for the recption of pipes and fittings..including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete semi rigid pipe 32 mm dia.including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing 100 mm sand cast Iron grating for gully trap.including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge..

Providing and fixing soil, waste and vent pipes 100 mm dia. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing bend of required degree with access door insertion rubber washer 3mm thick, bolts and nuts complete 100 mm dia. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS; 12701 marked with cover and suitable locking arrangement and makinbg necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing G.I pipes complete with G.I fillings and clamps, i/c cutting and making good the walls ect. 15mm dia nominal bore. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Making connection of G.I distribution branch with G.I main of following size by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

fixing watert mete and stop cock in G.I pipe link including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing brass bib cock of approved qua lity 15 mm nominal bore. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing brass stop cock of approved quality 15 mm nominal bore. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing G.I union in existing G.I pipe line , cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete whereve require. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved stell primer all complete. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Stell work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural stell ect, as required In gratings , frames guard bar, ladder, railings, brackets, gates and similar works. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing 1 mm thick m.S sheet door with frame of 40x40x6 mm angle iron and 3 mm m.S gusset plates all the junctions and corners all necessary fittings complete, including applying a priming coat of approved steel primer using M.S angels 40x40x6 mm for diagonal braces. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Kotla stone slabs 20mm thick in risers of steps , skirting, dado and pillars laid on 12 mm 9average) thick cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabe, including rubbing and polishing complete. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge..

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyarde, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning ect. Complete on 20 mm thick bed of cement mortar 1:4 (1 cement ; 4 coarse sand) Medium shade pigment using 50% white cement 50% Grey cement. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Painting with aluminium paint of approved brand and manufacture to give an even shade Two or more coats on new work. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge..

providing and fixing aluminium sliding door bolts,ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250X16mm. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10as per IS :1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125mm. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing corrugated G.S sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers tilled with white lead, including a cost of approved steel primerand two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/m2. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing ridges or hips of width 60 cm overall width plain G.S sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washers complete 0.63mm thick with zinc coating not less than 275gm/m2. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providimg and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer ) of brand Orient bell ,Nitco Ltd ,Kajaria ,Johnson Tiles with water absorption less than 0.08% and conforming to I S 15622, of approved make ,in all colours & shade ,in skirting ,riser of steps , over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joint with white cement &matching pigments etc. complete. including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- laminated conforming to IS : 12823, Grade 1, Type - II marked : including hauling of material in all leads and lifts and as per entire satisfaction and directions of the Engineer in Charge.

Sunil Chauhan